My intel iMac os 10.7.2 stuck in shutting down only when i use iTunes 10.5.1 42

i think this problem is from itunes because of i try to use many apps, i can shut down imac very fast . But only when i just only open itunes and immediately shut down.... my imac stuck on the gray screen with the small wheel at least 12 hours. Anyone can help me please.

yosaporn wrote:
ภาษาบ้านผมเขาว่าคุณไม่ช่วยแล้วยังเสือกกวนตีนอีกครับ ไอ้พวกกากอเมริกาเน่าๆ
I ran this through Google translate and it came out as:
"I had a language that you do not help, then try to stir it much longer. The residuewas rotten to the United States."
I can't be of much help if I don't understand what you are trying to say. This seems to be insulting which I'm not sure is the case or not. Considering I don't understand what you are trying to communicate I'll have to bow out and hope you are trying to be professional.
Good luck.

Similar Messages

HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

IMac shuts down unexpectedly when not in use

When I get back to my iMac after a long pause, it has shut down.
This is the log for what happened just before it shut down the last time.
21. des. 2014, 19.07.26 CalendarAgent[1323]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
21. des. 2014, 19.08.25 CalendarAgent[1323]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
21. des. 2014, 19.08.25 CalendarAgent[1323]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
21. des. 2014, 19.08.32 mdworker[18669]: Failed to obtain sandbox extension for path=/Users/elfinn/Library/Caches/mdworker. Errno:1
21. des. 2014, 19.08.33 mdworker[18669]: Failed to obtain sandbox extension for path=/Users/elfinn/Library/Caches/mdworker. Errno:1
21. des. 2014, 19.08.33 mdworker[18670]: Failed to obtain sandbox extension for path=/Users/elfinn/Library/Caches/mdworker. Errno:1
21. des. 2014, 19.08.33 mdworker[18670]: Failed to obtain sandbox extension for path=/Users/elfinn/Library/Caches/mdworker. Errno:1
21. des. 2014, 19.08.33 mdworker[18671]: Failed to obtain sandbox extension for path=/Users/elfinn/Library/Caches/mdworker. Errno:1
21. des. 2014, 19.08.33 mdworker[18671]: Failed to obtain sandbox extension for path=/Users/elfinn/Library/Caches/mdworker. Errno:1
21. des. 2014, 19.09.26 CalendarAgent[1323]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
21. des. 2014, 19.09.26 CalendarAgent[1323]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
21. des. 2014, 21.00.20 distnoted[1293]: # distnote server agent absolute time: 130.864989531 civil time: Sun Dec 21 21:00:20 2014 pid: 1293 uid: 506 root: no
21. des. 2014, 21.00.35 mdworker[1312]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8283710070
21. des. 2014, 21.00.36 mdworker[1312]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8285102890
21. des. 2014, 21.00.36 mdworker[1312]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8283505850
21. des. 2014, 21.00.36 mdworker[1312]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8283715960
21. des. 2014, 21.00.37 mdworker[1312]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8285106d90
21. des. 2014, 21.00.37 mdworker[1312]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f828500cad0
21. des. 2014, 21.00.50 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0e19a80
21. des. 2014, 21.00.54 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0f0b080
21. des. 2014, 21.00.54 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0c21a40
21. des. 2014, 21.00.55 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0d214b0
21. des. 2014, 21.00.55 mdworker[1305]: Failed to obtain sandbox extension for path=/Users/elfinn/Library/Caches/mdworker. Errno:1
21. des. 2014, 21.00.55 mdworker[1305]: Failed to obtain sandbox extension for path=/Users/elfinn/Library/Caches/mdworker. Errno:1
21. des. 2014, 21.01.10 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe33066f0
21. des. 2014, 21.01.14 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe3106470
21. des. 2014, 21.01.15 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0f04f10
21. des. 2014, 21.01.15 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe3207780
21. des. 2014, 21.01.34 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0e1f0c0
21. des. 2014, 21.01.34 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe33104b0
21. des. 2014, 21.01.34 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0e21a10
21. des. 2014, 21.01.34 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0e152e0
21. des. 2014, 21.01.58 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.01.59 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.01.59 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.01.59 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.01.59 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.01.59 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.01.59 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.01.59 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.01.59 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.02.11 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.02.14 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.02.14 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.02.15 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.02.15 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.02.15 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.02.18 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe3107a10
21. des. 2014, 21.02.18 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0c237d0
21. des. 2014, 21.02.18 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0d2a470
21. des. 2014, 21.02.18 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.02.57 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe3105ab0
21. des. 2014, 21.02.57 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0f025c0
21. des. 2014, 21.03.00 mdworker[1320]: -[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0x7f8fe0f029c0
21. des. 2014, 21.03.00 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.03.00 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.03.02 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)
21. des. 2014, 21.03.02 mdworker[1318]: ImageIO: CreateMetadataFromXMPBufferInternal Threw error #203 (Duplicate property or field node)

I have a similar issue with my older MacBook Pro 3,1 since Mavericks. In Mavericks it would completely freeze. In Yosemite it reboots.
On my machine somehow it is tied to whether I have Wifi turned on or off (whether associated with a connection or not). I typically use my computer near the router and turn off the wifi. Since Mavericks if I turn off my Wifi, it will eventually crash so I have to manually disassociate but leave wifi on to keep my computer from crashing. Not sure where the [com.apple.calendar.store.log.caldav.coredav] errors fit in but I always see them shortly before a crash if wifi is off.

Hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.

hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.an unknown error accurred (2001)

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1

6310 is stuck on "shutting down".

6310 is stuck on "shutting down". ON button does nothing.
Restarted my mac. no help.
Reinserted usb connection. no help.
This question was solved.
View Solution.

HI,
In that case just pull the power cord.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Ipad stuck in shut down

ipad 2 is stuck in shut down process and will not connect to itunes. unknown error.

I had the same problem…followed your suggestion and it work now…thanks! I still dont know what caused it though..

Virtualized servers get stuck at "Shutting down Windows Modules Installer service ..."

Hi,
I have a Windows 2008 R2 (no service pack) server that has been virtualized last summer and since then:
- Windows Update does not download any updates (it says Cancelled for every update in the Update History)
- When I reboot the vm, it gets stuck on "Shutting down Windows Modules Installer service ..." and I have to cold-Reset the vm to get it working again.
I tried running Windows Update Standalone Installer (Windows6.1-KB947821-v20-x64.msu) on the machine, but that gets stuck on "searching for updates"...
I tried stopping the Windows Update service but that doesn't work either, it says that the service is not responding...
I'm not sure what to try next, I'd appreciate any pointers.
Thanks a lot,
Guillaume

Hi,
Pls try to do the following to reset the whole
SoftwareDistribution folder:
1. Stop the windows Updates service. To do this, follow these ste
a. Click "Start", click"Run", type "services.msc" (without the quotation marks), and
then click "OK".
b. Right-click the "windows Updates" service.
c. Click "Stop". The service will take a moment to stop.
2.rename this folder(renamed to oldsoftwaredistruibution)
3. Start the windosw Updates service. To do this, follow these steps
a. Click "Start", click "Run", type "services.msc" (without the quotation marks), and then click "OK".
b. Right-click the "Automatic Updates" service, and then click "Start".
The service will take a moment to start and the folder will be recreated when you try to visit windows update site. You can then delete the folder.
After all, try to see whether your AU is functioning.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Applications on my iMac OSX 10.6.8 keeps shutting down immediately when I try to open. Help! I tried repair disk in disk utilities and nothing works..

Applications on my iMac OS 7.1 keeps shutting down immediately when I try to open.
Help! I tried repair disk in disk utilities and nothing works..

Perhaps you could try this to resolve your issue: http://support.apple.com/kb/HT1564
Try booting up to Safe Boot and see if you still have this issue in "safe mode." This will help you determine if the issue is caused by 3rd part sofware, or some other type of OS corruption.

IMac 2010 randomly shutting down, only reboots when power cable is unplugged and replugged

Specs
It's a stock 21.5inch iMac mid-2010, with the addition of some extra RAM - two more 4gb sticks bringing it up to a total 12gb - that I've had installed for roughly 6 months with no problems.
No problems with my Mac since we bought it from the Apple Store until the last couple of days when this started happening. I don't have AppleCare and obviously I'm out of warranty.
Problem
Seemingly random shut downs. I've tried to work out if it's to do with overheating, but I've been playing some graphically intensive games today and that hasn't killed it. The strangest thing is that most of the shut downs are when it's not even in use - the next time I sit down to use it it has been turned off.
I don't think this is a software problem as it's been happening on the OSX and Windows partitions.
Nothing happens when I press the power button until I unplug the power cable, wait a few seconds, plug it back in again then press the power button. This makes me wonder if it's a problem with the power cable? Any tests I could run?
Any ideas? Tests I can run? Or is it a lost cause?
Thanks in advance!

After further testing, it seems to only be powering back on if I leave it unplugged for about 20 seconds. Is this something to do with resetting the SMC?

IMAC Intel Core 2 Duo -- from Blue Screen to Shut Down -- Need Assistance

I have the iMac 20-inch Intel Core 2 Duo.
Was on the internet last night and the computer completely locked up, got he spinning pinwheel, waited for about 5 minutes and tried a force quit with no luck. I shut it down and then powered it back up and only got to the blue screen. Shut it down again, same problem. Let it sit for a couple of hours to see if it would fully boot but nothing. Searched a bit on the apple support site and went with the reccomendation of trying to start in safe mode, got to the grey apple screen, then it went black and shut down on its own and has done that every time since.
I have unplugged everything several times, reset the PRAM and still nothing.
I have been getting the spinning pinwheel off and on over the past few weeks but a force quit would usually clear the application. I have been experiencing problems accessing hotmail lately so I have been clearing the history and deleting cookies, this has been the only way I have been able to access hotmail. Don't know if that has anything to do with this or not.
Additionally the computer has been gradually getting slower over the past few months. Didn't really think much of it at the time.
My biggest concern is losing the data I have saved on the hard drive right now. Getting the computer to work again would be nice too as I only bought it about a year and a half ago.
Any assistance or info greatly appreciated.
Thanks

Take a look at these two articles: Startup issues http://support.apple.com/kb/TS1417
Gray screen at startup
http://support.apple.com/kb/TS2570

IMac G5 Intel Early model 10.4.4 will not shut down

I have just replaced the internal HDD due to hardware failure in my iMac g5 (Intel early model) reinstalled the OS, applied all updates successfully. Problem is the machine WILL NOT SHUT DOWN. If I chose shut down, it will only restart! (As it does if I choose restart) Only way I can power it down, is to pull the plug or hold the power button in. It will go to sleep, after preset time on sys prefs. but will not shut down. HELP!!!!!!!!

iMac g5 (Intel early model)
There is no such Mac.
It is either an Intel Mac or a PPC Mac.
If yours is an Intel mac the correct forum is here:
http://discussions.apple.com/category.jspa?categoryID=189

IMac won't turn on (has been shutting down abruptly in the past)

Okay, hi everyone.
I've got a second hand iMac G3. It had problems with the hard drive earlier, so that's been replaced...
In the past month and a bit my computer has been abruptly turning off (not completely, the white light of the power button is still on when this happens) with no aparant cause. The screen just goes black like turning of a TV screen and I can't do anything but turn it completely off by holding the power button.
After this happens I would try and turn it back on, almost imedeiatly, but it wouldn't turn on: The power button would light up, and blink just slightly, with a slight tick/beep sound to accompany it. This is only straight afterwards though, if I leave it for a while then boot it up, it will be fine.
A lot of the time this has happened when I've just walked away from the computer without it doing anything, other times it happens right in the middle of doing something..
I haven't followed up the problem due to not knowing what it was at first and lack of time, especially this past month since I've been away overseas.
And now it's the last time it's shut down on me. I tried to start it up again straight afterwards, and of course the power light blinked slightly along with the accompaning sound. Turned it off, tried again a bit later, still didn't work. Now when I try to turn it on I press the power button, it lights up for a second then turns off. So my computer wont turn on, and I don't know what to do.
Hope one of you guys know what the problem is.
I was looking at these threads and someone had a similar problem (http://discussions.apple.com/thread.jspa?threadID=1168792&tstart=0), something about the flyback transformer I think, whatever that is. Does anyhone think this could be the problem??
Another thing. Just days ago I was having problems burning cd's (probably still am), something about error code 0x8002006D and not being able to calibrate enough laser power. I don't know if this has anything to do with it...
Thanx for putting up with me, usually it's my dad but he's asleep sick..

No Kittytom is referring to his having found that his iMac wouldn't boot right side up but would upside down. Further circuit disturbance showed that it was bad soldering on the Flyback transformer that was the problem.
Also common were bad soldering on the HV capacitors in the area of the FT. Or just bad capacitors.
If your iMac had cap problems it would exibit that behavior.
Slow breakdown in the insulation of the FT would also act like that.
Richard

My iMac is telling me I have to shut down and restart; reminds me of the blue screen of death many years ago on my old PC.

A greyness rolls down the screen and then a box appears in the middle saying, in several languages, something like, "You must shut down your computer. Press and hold the button until it shuts down. Then press it again to restart. "
The first time it happened this morning, I had actually just left my computer about ten minutes prior, having restarted it as I often do when I leave it so it will be fresh for my next session. So it shut down on the screen with all my family's usernames.
The second time it happened, a few minutes ago, I only had Mail open and Safari with just one website open, and I'd only just got back on the computer 5 minutes prior.
The only recent changes I can think of are that my husband installed 8 GB of RAM over the weekend and I moved about 200 GB of data from my internal hard drive to an external hard drive that stays connected to my iMac all the time.
This is scary; I've never heard of this happening on a Mac. And my iMac is barely 1 year old. Can you tell me what's going on? Do I need to do something to fix it?

What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful article on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir

1st Gen iMac G5 doesn't turn on--after shutting down during sleep

So I bought an IMAC G5 17/1.6/256/80/COMBO when they first came out. Within the first year and a half I had to get two logic boards replaced. Fast foward to about 4 months after Applecare ran out and the machine began shutting down instead of going to sleep. Then, last week--nothing--wouldn't even turn on. So I unplugged it and plugged it back in and it started fine. Two days ago same thing only now it won't turn on at all. So I took off the cover, internal power button doesn't work--tried reseting SMU and still nothing. LED 2 doesn't come on at all, but LED 1 isn't constant, it flickers (don't know if that's normal). So I assume it's either logic board or power supply.
Now, I've read the Repair Extension program about this model, but unfortunately it only goes out three years (curious because that's how long my AppleCare lasted). And I found it odd that after getting it fixed twice it would still have these defective parts. So I called the support line trying to explain the situation. After being on hold for 20 min. the guy came back and said my warranty was up so I couldn't even talk to someone on the phone about the problem. I could get it fixed, but it was going to cost me.
Anyone have any advice? I was going to get another computer later this year (although will probably change my mind about getting another Mac after this experience), and I know fixing this one will be pretty expensive--something I can't afford right now. Does anyone know the rationale behind a) three year cutoff and b) Apple not informing owners that they'd better get it checked out before period runs out. And I guess as a last resort if it winds up being too expensive to fix, anyone know if people buy broken IMACs? Talk about frustration, I didn't even have to go through this type of nonsense when I used Windows.
Thanks for your help.

Welcome to Discussions - try calling Apple Customer Service 800-767-2775 and politely telling them your tale, then ask for a fix or a new computer.

My Toshiba is stuck on shutting down screen

I have a Toshiba satellite p55t a5118 with windows 8.1 i7 8gb ram 1tb HDD. My computer is stuck on blue "shutting down" screen. And the keys are not responding. I have tried letting the computer die, there is no place for me to take out the battery, and when I press the power button it shows the Toshiba first booting screen and then straight to the shutting down screen. None of the advance booting works. I have pressed 0, f2, alt control delete.still nothing just an annoying shutdown screen. Can someone plz help me?
I am familiar with all kinds of advance boot ups but the computer won't let me get to them
Solved!
Go to Solution.

Hi! Try to follow the steps on this link http://support.toshiba.com/support/viewContentDetail?contentId=4004523
It will not erase anything on your computer.

My intel iMac os 10.7.2 stuck in shutting down only when i use iTunes 10.5.1 42

Similar Messages

Maybe you are looking for