My internal search term instances are lower than in Google Analytics

Which doesn't make sense because Google Analytics are case sensitive and use unique searches, so it seems like SiteCatalyst would be more.
Case sensitive - doesn't SiteCatalyst combine all instances of search terms with different cases, so "cancel" would include "cancel," "CANCEL", and 'Cancel." But yet, SiteCatalyst # for 'cancel' is still lower than Google Analytics # is for 'cancel' (not even including all other different case versions).
Unique Searches - Google Analytics excludes duplicate searches within a single visit. So wouldn't SiteCatalyst 'visits' # match Google Analytics unique searches #? But it doesn't - GA # is always more.

Hi Onder!
I put your Home Page heading "Iedereen kan zich topmodel voelen" to Google search and it found immediately your site in good location, on the 7th place!
Good result!
Best Regards
TaikaJim

Similar Messages

Post totals are lower than reality

I have been a member since 2002 and I have over 155 posts, yet, there are only 14 or so in my current posts. I read where the old posts are not being counted. Will it ever be entered again, or is it sort of a start from scratch? If so, I have another account that got started a couple months ago that has more posts but its' not a 2 level.
Any help by anyone is appreciated...

You're Welcome Chris!
Posts that have no additional responses, will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be archived/locked, so no responses can be entered. But the Threads will not disappear.
Topics in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
If you want to view your Total Posts Online, you can do a Discussions Search using these parameters.
Restrict by Category or Forum: All Categories
Restrict by Date Range: All
Restrict by Username: Your Alias
Thank You for the star!
ali b

Widescreen resolutions LOWER than 1680x1050?

I have a MSI Geforce 7600 GS AGP 256mb graphic card and a Samsung 226BW monitor. My problem is, that I can't get any widescreen resolutions that are LOWER than the native 1680x1050. This is a problem, because I don't own the fastest machine (a 3ghz P4), so running games in the native resolution is impossible. Anybody who knows what to do here? Is it my graphic card that just doesn't support these resolutions, or is there something you can do about it?
I have updated my nvidia drivers, without any luck. I also tried to make all resolutions available, but this only gave me widescreen resolutions HIGHER than 1680x1050, which is no good...
Anybody who can help?

Quote from: lars_el on 01-September-07, 04:31:01
I have a MSI Geforce 7600 GS AGP 256mb graphic card and a Samsung 226BW monitor. My problem is, that I can't get any widescreen resolutions that are LOWER than the native 1680x1050. This is a problem, because I don't own the fastest machine (a 3ghz P4), so running games in the native resolution is impossible. Anybody who knows what to do here? Is it my graphic card that just doesn't support these resolutions, or is there something you can do about it?
I have updated my nvidia drivers, without any luck. I also tried to make all resolutions available, but this only gave me widescreen resolutions HIGHER than 1680x1050, which is no good...
Anybody who can help?
7600GS supports widescreen natively.
I think as far as gaming resolution is concern, the game should automatically refer the setting that the game is running.

Transaction xk03 - Search term

hello, in the transaction xk03:
Step 01:You check the adress checkbox and validate.
1)On the display vendor:address screen, there is a field named search term 1/2,
2)When i press F1 on the field, technical options , i get the structure ADDR1_DATA-SORT1.
I would like to know the name of the table where the search term values are stored(SORT1).thx

Sooness,
Start transaction SE11 and display table ADRC.
Click the Indexes button.
You may find the SAP defined index I13 for the SORT1 field.
So, all address data is in table ADRC. And an extra database index exists for the sortfield. As far as I know you cannot access / read this database index using normal abap.
Ger

How do i put in keyword search terms for Google in iWeb

Does anyone know how to put keyword (search term) into my existing webpage for Google?

This might be of interest to you: Official Google Webmaster Central Blog: Google does not use the keywords meta tag in web ranking.
That being said use iWeb SEO to add metadata, page and site descriptions, title tags, etc., to an iWeb page, either after publishing to MobileMe or after publishing to a folder on the hard drive.
More information on getting Google to recognize your site can be found here: Get your iWeb website found in search engines like Google Yahoo MSN and Bing.
OT

"The version of the Player that you are trying to install is lower than what is currently installed" when installing 14.0.0.176

I've been deploying flash updates thru SCCM for a long time using the MSI. With this update, many computers updated successfully, but about 200+ of them failed. Each computer I have looked at has the message "Product: Adobe Flash Player 14 ActiveX -- The version of the Player that you are trying to install is lower than what is currently installed." in event viewer. Attempting a manual install of the MSI produces a similar interactive message. The current installed version is definitely older than the one I am attempting to install. I am only able to re-mediate by manually uninstalling, and then installing 14.0.0.176. I could script and deploy an uninstaller, but I would rather the bug with the MSI be fixed.

Dear María,
Finally, I have been able to reproduce the error, both in ActiveX and plugin installers updating from version 15.0.0.246.
Here you have the logs:
ACTIVEX
=== Verbose logging started: 18/12/2014 16:12:54 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (E0:1C) [16:12:54:137]: Resetting cached policy values
MSI (c) (E0:1C) [16:12:54:137]: Machine policy value 'Debug' is 0
MSI (c) (E0:1C) [16:12:54:137]: ******* RunEngine:
           ******* Product: install_flash_player_16_active_x.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (E0:1C) [16:12:54:138]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:1C) [16:12:54:138]: Grabbed execution mutex.
MSI (c) (E0:1C) [16:12:54:155]: Cloaking enabled.
MSI (c) (E0:1C) [16:12:54:155]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:1C) [16:12:54:158]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [16:12:54:162]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_active_x.msi
MSI (s) (30:E4) [16:12:54:162]: Grabbed execution mutex.
MSI (s) (30:4C) [16:12:54:163]: Resetting cached policy values
MSI (s) (30:4C) [16:12:54:163]: Machine policy value 'Debug' is 0
MSI (s) (30:4C) [16:12:54:163]: ******* RunEngine:
           ******* Product: C:\WINDOWS\system32\install_flash_player_16_active_x.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (30:4C) [16:12:54:163]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_active_x.msi 3: -2147287038
MSI (s) (30:4C) [16:12:54:164]: MainEngineThread is returning 2
MSI (s) (30:E4) [16:12:54:177]: User policy value 'DisableRollback' is 0
MSI (s) (30:E4) [16:12:54:178]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:E4) [16:12:54:178]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:E4) [16:12:54:178]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:E4) [16:12:54:178]: Restoring environment variables
MSI (c) (E0:1C) [16:12:54:188]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:1C) [16:12:54:188]: MainEngineThread is returning 2
=== Verbose logging stopped: 18/12/2014 16:12:54 ===
PLUGIN
=== Verbose logging started: 18/12/2014 16:15:40 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (28:44) [16:15:40:364]: Resetting cached policy values
MSI (c) (28:44) [16:15:40:364]: Machine policy value 'Debug' is 0
MSI (c) (28:44) [16:15:40:364]: ******* RunEngine:
           ******* Product: install_flash_player_16_plugin.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (28:44) [16:15:40:364]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (28:44) [16:15:40:364]: Grabbed execution mutex.
MSI (c) (28:44) [16:15:40:384]: Cloaking enabled.
MSI (c) (28:44) [16:15:40:384]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (28:44) [16:15:40:384]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:2C) [16:15:40:384]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_plugin.msi
MSI (s) (30:2C) [16:15:40:384]: Grabbed execution mutex.
MSI (s) (30:3C) [16:15:40:384]: Resetting cached policy values
MSI (s) (30:3C) [16:15:40:384]: Machine policy value 'Debug' is 0
MSI (s) (30:3C) [16:15:40:384]: ******* RunEngine:
           ******* Product: C:\WINDOWS\system32\install_flash_player_16_plugin.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (30:3C) [16:15:40:384]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_plugin.msi 3: -2147287038
MSI (s) (30:3C) [16:15:40:384]: MainEngineThread is returning 2
MSI (s) (30:2C) [16:15:40:404]: User policy value 'DisableRollback' is 0
MSI (s) (30:2C) [16:15:40:404]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:2C) [16:15:40:404]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:2C) [16:15:40:404]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:2C) [16:15:40:404]: Restoring environment variables
MSI (c) (28:44) [16:15:40:414]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (28:44) [16:15:40:414]: MainEngineThread is returning 2
=== Verbose logging stopped: 18/12/2014 16:15:40 ===

The boxes where I would type in search terms and URL are GONE! So is the BACK BUTTON. HELP!

I downloaded software to convert jpg files to pdf's, and it worked. however, I think it installed Incredimail, and I suspect that it installed Ask.com - neither of which I wanted. It was just after that that my back arrow and my boxes where i type in search terms and urls DISAPPEARED! Firefox is compatible with some important websites and has features that i need. NEED.

Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
* Press F11 to toggle full screen mode (Firefox/File > Full Screen)
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

Runtime error:ABAP program lines are longer than the internal table

Hi all,
Below is the code I have written,when Iam running it Iam getting
'ABAP program lines are longer than the internal table' runtime error.How can I resolve it.
REPORT ZTEST1 NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES:MARC,CDHDR,CDPOS.
TYPE-POOLS:SLIS.
DATA:HEADER TYPE SLIS_T_FIELDCAT_ALV,
 WA TYPE SLIS_FIELDCAT_ALV,
 LAYOUT TYPE SLIS_LAYOUT_ALV.
TYPES:BEGIN OF MARC_TY,
 MATNR LIKE MARC-MATNR,
 WERKS LIKE MARC-WERKS,
 EKGRP LIKE MARC-EKGRP,
 MINBE LIKE MARC-MINBE,
 EISBE LIKE MARC-EISBE,
 MABST LIKE MARC-MABST,
 END OF MARC_TY.
TYPES:BEGIN OF MATNR1_TY,
 MATNR1 LIKE CDHDR-OBJECTID,
 END OF MATNR1_TY.
TYPES:BEGIN OF CDHDR_TY,
 OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
 OBJECTID LIKE CDHDR-OBJECTID,
 CHANGENR LIKE CDHDR-CHANGENR,
 USERNAME LIKE CDHDR-USERNAME,
 UDATE LIKE CDHDR-UDATE,
 END OF CDHDR_TY.
TYPES:BEGIN OF CDPOS_TY,
 OBJECTCLAS LIKE CDPOS-OBJECTCLAS,
 OBJECTID LIKE CDPOS-OBJECTID,
 CHANGENR LIKE CDPOS-CHANGENR,
 TABNAME LIKE CDPOS-TABNAME,
 FNAME LIKE CDPOS-FNAME,
 CHNGIND LIKE CDPOS-CHNGIND,
 VALUE_NEW LIKE CDPOS-VALUE_NEW,
 VALUE_OLD LIKE CDPOS-VALUE_OLD,
 END OF CDPOS_TY.
**************TABLE TYPES********************************************
TYPES: MARC_TAB TYPE TABLE OF MARC_TY,
 MATNR1_TAB TYPE TABLE OF MATNR1_TY,
 CDHDR_TAB TYPE TABLE OF CDHDR_TY,
 CDPOS_TAB TYPE TABLE OF CDPOS_TY.
*******************INTERNAL TABLES************************************
DATA:MARC_ITAB TYPE MARC_TAB,
 MATNR1_ITAB TYPE MATNR1_TAB,
 CDHDR_ITAB TYPE CDHDR_TAB,
 CDPOS_ITAB TYPE CDPOS_TAB.
****************WORK AREAS********************************************
DATA:MARC_WA TYPE MARC_TY,
 MATNR1_WA TYPE MATNR1_TY,
 CDHDR_WA TYPE CDHDR_TY,
 CDPOS_WA TYPE CDPOS_TY.
*******************SELECTION-SCREEN***********************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
PARAMETERS:PLANT LIKE MARC-WERKS.
SELECT-OPTIONS:MATERIAL FOR MARC-MATNR.
SELECT-OPTIONS:DATE FOR CDHDR-UDATE.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
SELECT MATNR
 WERKS
 EKGRP
 MINBE
 EISBE
 MABST
 FROM MARC INTO TABLE MARC_ITAB
 WHERE MATNR IN MATERIAL
 AND WERKS = PLANT.
CHECK MARC_ITAB[] IS NOT INITIAL.
LOOP AT MARC_ITAB INTO MARC_WA.
 MATNR1_WA-MATNR1 = MARC_WA-MATNR.
 APPEND MATNR1_WA TO MATNR1_ITAB.
 CLEAR MATNR1_WA.
ENDLOOP.
CHECK MATNR1_ITAB[] IS NOT INITIAL.
SELECT OBJECTCLAS
 OBJECTID
 CHANGENR
 USERNAME
 UDATE
 FROM CDHDR INTO TABLE CDHDR_ITAB
 FOR ALL ENTRIES IN MATNR1_ITAB
 WHERE OBJECTCLAS = 'MATERIAL'
 AND OBJECTID = MATNR1_ITAB-MATNR1
 AND UDATE IN DATE.
CHECK CDHDR_ITAB[] IS NOT INITIAL.
SORT CDHDR_ITAB[] DESCENDING BY OBJECTID CHANGENR.
DELETE ADJACENT DUPLICATES FROM CDHDR_ITAB[] COMPARING OBJECTID.
SELECT OBJECTCLAS
 OBJECTID
 CHANGENR
 TABNAME
 FNAME
 CHNGIND
 VALUE_NEW
 VALUE_OLD
 FROM CDPOS INTO CORRESPONDING FIELDS OF TABLE CDPOS_ITAB
 FOR ALL ENTRIES IN CDHDR_ITAB
 WHERE OBJECTCLAS = CDHDR_ITAB-OBJECTCLAS
 AND OBJECTID = CDHDR_ITAB-OBJECTID
 AND CHANGENR = CDHDR_ITAB-CHANGENR
 AND TABNAME = 'MARC'
 AND FNAME IN ('MINBE','EISBE','MABST','LVORM')
 AND CHNGIND = 'U'.
CHECK CDPOS_ITAB[] IS NOT INITIAL.
*LOOP AT CDPOS_ITAB INTO CDPOS_WA.
WRITE: / CDPOS_WA-OBJECTCLAS,
 CDPOS_WA-OBJECTID,
 CDPOS_WA-CHANGENR,
 CDPOS_WA-TABNAME,
 CDPOS_WA-FNAME,
 CDPOS_WA-CHNGIND,
 CDPOS_WA-VALUE_NEW,
 CDPOS_WA-VALUE_OLD.
*ENDLOOP.
WA-SELTEXT_L = 'OBJECTCLAS'.
WA-COL_POS = '1'.
WA-FIELDNAME = 'OBJECTCLAS'.
WA-TABNAME = 'CDPOS_ITAB'.
WA-OUTPUTLEN = '15'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'OBJECTID'.
WA-COL_POS = '2'.
WA-FIELDNAME = 'OBJECTID'.
WA-TABNAME = 'CDPOS_ITAB'.
WA-OUTPUTLEN = '20'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'CHANGENR'.
WA-COL_POS = '3'.
WA-FIELDNAME = 'CHANGENR'.
WA-TABNAME = 'CDPOS_ITAB'.
WA-OUTPUTLEN = '8'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'TABNAME'.
WA-COL_POS = '4'.
WA-FIELDNAME = 'TABNAME'.
WA-TABNAME = 'CDPOS_ITAB'.
WA-OUTPUTLEN = '5'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'FNAME'.
WA-COL_POS = '5'.
WA-FIELDNAME = 'FNAME'.
WA-TABNAME = 'CDPOS_ITAB'.
WA-OUTPUTLEN = '7'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'CHANGING'.
WA-COL_POS = '6'.
WA-FIELDNAME = 'CHANGING'.
WA-TABNAME = 'CDPOS_ITAB'.
WA-OUTPUTLEN = '1'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'VALUE_NEW'.
WA-COL_POS = '7'.
WA-FIELDNAME = 'VALUE_NEW'.
WA-TABNAME = 'CDPOS_ITAB'.
WA-OUTPUTLEN = '5'.
APPEND WA TO HEADER.
CLEAR WA.
WA-SELTEXT_L = 'VALUE_OLD'.
WA-COL_POS = '8'.
WA-FIELDNAME = 'VALUE_OLD'.
WA-TABNAME = 'CDPOS_ITAB'.
WA-OUTPUTLEN = '5'.
APPEND WA TO HEADER.
CLEAR WA.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
 I_PROGRAM_NAME = SY-REPID
 I_INTERNAL_TABNAME = 'CDPOS_ITAB'
 I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = SY-REPID
CHANGING
 CT_FIELDCAT = HEADER[]
EXCEPTIONS
IF SY-SUBRC <> 0.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 IT_FIELDCAT = HEADER[]
TABLES
 T_OUTTAB = CDPOS_ITAB[]
IF SY-SUBRC <> 0.
ENDIF.

Your select querry on MARC is not matching with MARC_TY.
The field in the MARC table and MARC_TY should be same.
and also, when you are making select querry on CDPOS table
with all entries.
When ever you are using all entries select statement, you should check whether the internal table is having value.
you should check
if CDPOS_IT[] is not initial.
SELECT OBJECTCLAS
OBJECTID
CHANGENR
TABNAME
FNAME
CHNGIND
VALUE_NEW
VALUE_OLD
FROM CDPOS INTO CORRESPONDING FIELDS OF TABLE CDPOS_ITAB
FOR ALL ENTRIES IN CDHDR_ITAB
WHERE OBJECTCLAS = CDHDR_ITAB-OBJECTCLAS
AND OBJECTID = CDHDR_ITAB-OBJECTID
AND CHANGENR = CDHDR_ITAB-CHANGENR
AND TABNAME = 'MARC'
AND FNAME IN ('MINBE','EISBE','MABST','LVORM')
AND CHNGIND = 'U'.
endif.
Regards
Madhan D

Where are FlashHelp Search Terms in Output?

I need to find and remove some search terms in the output/generated files for a FlashHelp project. I have searched through all of the output and cannot find the terms I am looking for, but they are still there when I search for them when I run FlashHelp.
Thank You,
Ray

Hi there
There are a few places the terms may exist. What version of RoboHelp are you using? And what RoboFlavor? (RoboHelp for Word or RoboHelp HTML)
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

PDF files are very faint and the search function doesn't highlight the search term when found

I'm using Firefox 5 with Windows 7 64 bit. When I open a PDF file the file is very faint and the search function doesn't highlight the search term in the body of the PDF.

Dear Peter,
I met the following problem, and please help me.
My English (not Chinese) operating system: Windows XP
Version: 2002
Before using RoboHelp 7 to generate Webhelp, I perform the
following steps:
1. Control Panel->Regional Options
2. On the "Languages" page make sure make sure you check the
box "Install files for East Asian languages".
3. On the "Advanced" page select "Chinese" from the language
dropdown list.
Then I perform the following steps:
1. Use RoboHelp 7 to generate Webhelp (my Webhelp project
contains localized Chinese files).
2. In the "Search" tab, input a Chinese character(For example
"连接") and perform a seach.
Result: Serching...(or 正在搜索) or
No topics found (or
未找到主题)。
Expected result: I can get the result.
Text

Windows 7's Infection Rates Five Times Lower Than Windows XP

"Windows 7's marketshare continues to grow at a steady pace at the expense of its two older siblings, Windows Vista and XP, according to the data from StatCounter. In terms of global usage, Windows XP is at 46.44%, Windows Vista at 12.5%, and Windows 7 at 32.64%. Good news for everyone, right? Well, if these adoption numbers aren't convincing enough, perhaps this might convince you (or your technologically challenged peers) - Windows 7 has the lowest infection rates per quarter amongst Microsoft's currently supported operating systems."
Complete Article:
http://www.neowin.net/news/windows-7s-infection-rates-five-times-lower-than-windows-xp
From Microsoft's Security Intelligence Report here:
http://download.microsoft.com/download/6/0/5/605BE103-9429-4493-898B-E3D50AB68236/Microsoft_Security...
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Hmmm hard to say. If I was going to take a stab at it you might be hitting a DC in a remote site.
http://blogs.technet.com/b/askpfeplat/archive/2011/12/26/in-search-of-roaming-active-directory-clients-how-to-scriptomatically-identify-missing-active-directory-subnet-definitions.aspx
A great tool for this, http://blogs.technet.com/b/askpfeplat/archive/2012/06/09/slow-boot-slow-logon-sbsl-a-tool-called-xperf-and-links-you-need-to-read.aspx
You could also take a look at this. http://blogs.technet.com/b/askpfeplat/archive/2013/03/12/slow-boot-slow-login-sbsl-hotfix-rollup-for-windows-7-and-server-2008-r2-available-today.aspx
Mark Morowczynski
Microsoft Senior Platforms PFE
Blog:
http://blogs.technet.com/b/askpfeplat Twitter:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Search Term Issues when passed as Parameters in Opening a PDF file in Browser (Updated)

Hi everyone,
I am wondering if there is a solution to the following issue.
We are working with PDF files that have been OCRed (invisible text layer). We use a search engine to search the PDFs for terms. We then pass the search terms as a parameter to the PDF when we are opening it in Acrobat or Reader in the browser. It brings up a list of instances and the context in which it is found -- much like the native search function -- but it is not possible to only search for the exact phrase when it is passed as a variable..
In some cases, what we see are two lists -- so it has the filename with a list underneath that is expanded showing search results, and then a second instance of the file name after that list, but it is collapsed.
Is there a way to just have one list or both lists expanded at the same time?
Also, is there a way to ensure that it shows instances where more search keywords are found at the top of the list.
For example, if we pass the search phrase "wanted to buy a car" it might show instances of "to" at the top of the list, but later on in the collapsed list it might show instances of "buy a car". Again, is it possible to prioritize the results, or at the very least, expand everything? I am not sure what else we can try.
thank you,
Jeremy
Follow up: I should note that some times the two lists appear to be the same or similar terms found twice. At the top it would say 2 documents with n instances (where n is the number of instances). I have noticed this when the search keyword count goes up.
Follow up #2: It appears that this occurs more often when using more than 2 keywords, but I have seen it happen with only 2 words.

There were documents available in the knowledgeable that I no longer have the urls for. I have had communication with Adobe Acrobat support personnel that have made the same statements. I do not have the habit of asking official Adobe tech support people to prove their statements by providing documentation. I have also seen Adobe employees give presentations on computers that have had both installed. When they were asked about the incompatibility, they did say the equivalent of phooey. However, enough people on this forum have had their problems disappear when they have removed one of the two programs that I feel comfortable giving that advice. Yes some people have no problems running both until one of the programs or a system component gets updated and then things stop working. My advice is not to have both on the same computer. When two programs share system calls and can fight over who gets to handle the call it makes sense that it can cause a problem. It doesn't make a difference if it is Reader and Acrobat or any two other programs you run. If you are not having a problem with running both GREAT. However, if you are running both and have a problem, it is a simple step to eliminate one and see if the problem disappears.

Search term failed

Hi all,
When I am searching for Vendor number with field Name1 search key (Eg: for Michel I am searching with Mic*) in SE16 it is displaying correct vendors.
If I am searching the same in XK03 search term is failing says no values for the selection.
This is related to Russian language.
I used to login in RU language when I am login into sap main screen.
All these Russian language characters are in Cyrillic format.
When I am going to search for vendor with name1 I am just copying the starting 3 characters [Cyrillic RU] of name 1 and pasting in the search field to get my output.
But it is failing at XK03 & it is successful in SE16.
Why it Is happening like that, can any having idea about this please help me.

Hi Suneel,
Is this case sensitive (upper lower name)?
If this isn't perhaps you may want to search OSS notes or send note SAP for advise.
Also try to debug whether XK03 and SE16 are using the same search help or not.
Regards,
Ferry Lianto

Robohelp 9: Error when using search terms including the word "not"

We are moving from Robohelp 7 to Robohelp 9. We realize that Boolean operators such as NOT are supposed to be working now, but we do have times when we might find ourselves using search terms that include the word "not" on its own.
The problem that we are finding is that if we search for something like "office not installed", because that phrase is part of a specific error message we might be trying to locate, we are getting the error, "The words you typed is not a valid expression" [sic].
We have tried making modifications to the Stop Words and Always Ignore words and can't seem to find a solution. We do need to be able to search using the word "not" as a regular search term. Even as a Boolean operator (NOT), we are getting the same error. Searching for "office installed" will get us the result that we want, but we have a team of users who will definitely instinctually search using the word "not" since it's part of the error they are searching for.
Thoughts?

Hi Benjamin
First, I don't believe the Always Ignore has anything to do with Searching. That particular list is used when you instruct RoboHelp to build an index using the Smart Index Wizard.
Actually, something like "Office Not Installed" is a perfect use of the Index. But I'm guessing here that your system doesn't include an index in favor of trawling through the pile of words in the project.
If you aren't using an index yet, I'd highly suggest you investigate it. In a properly indexed system your users will find what they are looking for infinitely faster and easier than they ever will by using Search.
Just a thought... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

When using Google Toolbar, and I begin entering a search term, several complete choices appear, but when I click on one of them, autocomplete does not fill in the search box.

Why does the complete suggested search term not appear in the search box when I click on it?

Probably caused by search redirect Malware.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

My internal search term instances are lower than in Google Analytics

Similar Messages

Maybe you are looking for