My internal speaker don't work

Anyone had a problem that internal speaker on a MacBook Pro (summer 2010) stop work after using of headset?

System Preference > Sound > Output > Internal Speakers
Make sure Mute is not enabled.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 to flip the microswitch inside.
Sound output may be stuck in the digital mode.
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best

Similar Messages

Qosmio X870 - Internal speaker don't work but headphones do.

I'm a little annoyed as this problem has seemed to have randomly occurred.
Making it difficult to pinpoint what caused this/finding a solution... :(
So after opening my laptop from sleep or hibernate, I can't remember which specifically and want to listen to some music, I notice there is none.
I plug in my earphones, and there is sound. Both times the sound mixer is indicating sound.
The speakers are the default device, green tick, and sound levels are picked up. "This device is working properly.".
I actually let windows automatically find a newer driver version, which it surprisingly did, downloaded and installed - restart laptop. Still no sound.
I read somewhere that it appears for some that the hibernation and or sleep mode on Toshiba laptops cause the audio drivers to behave strangely. But I don't now what kind of troubleshooting to do, to fix this.
Or it could be hardware related, regarding the port/jack. I don't know. I pray its software.
Please could someone help me and make me happy again
Nigel

Hi
>Or it could be hardware related, regarding the port/jack. I don't know. I pray its software.
I dont think its hardware related issue.
As I understood the issue: the speakers work properly if the notebook runs in normal mode.
The speakers dont work if the unit wake up from hibernation or sleep mode.
I meet such issue on my 2nd notebook. The speakers did not work but sound appeared using connected headphones. I could solve this by sound driver update.
But I think this isnt a universal solution.
From my point of few you should try different workarounds.
First of the notebook should be tested and checked using the Toshiba preinstalled system.
The image has been configured and tested by Toshiba and usually everything should work properly. Therefore i would recommend you to use the Recovery disk (or HDD recovery procedure) in order to set the notebook back to the factory settings.
The other workaround would be the uninstallation of the sound driver as well as other sound driver related parts.
In device manager go to the sound, video and game controller
Here uninstall/delete the
- Realtek sound driver
- nVidia High Definition Audio (if available)
- Intel high definition audio controller (if available)
After this short procedure reboot the notebook.
Now you will need to wait until the deleted devices were recognized and installed again.
After this process has been finished, check the sound availability.

My iPods camera, speaker don't work and the battery needs to be replaced, if I send it into apple will they fix it all?

My iPods camera, speaker don't work and the battery needs to be replaced, if I send it into apple will they fix it all?

Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ

Internal speaker doesn't work with mountain lion

my internal speaker doesn't work after installation of mountain lion

Hi,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

IPod Touch: Internal Speaker doesn't work

Hi,
My iPod Touch was replaced ~6 months ago bec. the internal speaker was bad. This new one, though, the internal speaker doesn't work at all (except for the Clock/Alarm tones). The vol. button says "Headphones" on screen when you change the volume, whether or not the Headphones are plugged in. I've tried turning off and other things I've seen but no clear answer. Is there a fix for this?

Have you tried restoring it?
Can be a Hardware problem, go to the nearest Apple Store and see if they can fix it

TS1630 My speaker don't work if I open the music de level control on the end don't apear is the same problem with radio pandora or others apps I erase everything on my iPhone by erase and reset but the problem is here I can't hear the sound or ringer sele

I need help with my iPhone some body can help me. Speaker don't work when I open the music that work only headphones

Some body have a solution

Internal speakers don't work

My husband uses the dual USB late 2001 iBook more than I do, mainly with Toast and a Griffin iMic to copy our old vinyl records to CDs, and to run VirtualPC for his PC model railroad design app. He does all this in OS 9.2.2.
I used the iBook yesterday, and discovered that the internal speakers aren't working at all. (He hadn't noticed!) No startup chime, no alert beeps, nothing. The sound settings are not set to "mute". I rebooted in OS X (version 10.1, the original, which we've never upgraded), and it didn't make any difference. Still no sound.
If we plug in a set of headphones or external speakers, they will work, playing the startup chime and all other sounds.
It's never been taken apart, so it's unlikely that the speaker cables have been accidentally disconnected.
So far, I've tried the following, none of which helped: trashing the Sound prefs in OS 9 and restarting; resetting the PRAM; starting in OS X and then restarting in Open Firmware, resetting the NVRAM and then resetting the PRAM again. I also tried the hint in This Post - restarting with the headphones connected and then disconnecting them. And I tried plugging the iMic into a USB port, and the headphones into the iMic, and restarting and then disconnecting. No use! The iBook Audio Update was already installed, so that's not it.
We've compared the iBook's OS 9.2.2 Sound control panel with the one on a 7300 also running 9.2.2, and notice one interesting thing. When the iBook is freshly rebooted, the Sound > Speakers tab has the headphone icon present and highlighted, even when the headphones aren't connected. One can plug in the external speakers, and select the speakers icon, and they'll work. But it always defaults back to a highlighted headphone icon upon restart - even when the speakers are plugged in. The 7300's Speakers tab does not show any headphone icon at all, unless the headphones are actually connected. But this is only in OS 9. I don't see a comparable setting in the OS X System Prefs, where I can check on the speaker settings.
It's as if the iBook's sound port thinks the headphones are connected, even when they're not. Could this be a hardware problem with the port, or some kind of logic board problem?
My next step will probably be a reinstall of both OS's.
Dorothy

Ronda and Dave2,
Thanks for responding.
I'm beginning to think it has to be a hardware problem. It happens in both OS's, and when booting from the OS 9 install CD that came with the iBook - no startup chime at all. But the chime is there when either headphones or external speakers are hooked up.
I did restart with Command-Option-O-F, got into Open Firmware, and followed the instructions for resetting the NVRAM.
The OS X Sound preference pane has only two tabs: Alert and Output. Output shows only "Built-in audio controller", no matter what's plugged into the output port. (In OS 9, the Sound control panel has 4 tabs: Alert, Input, Output and Speakers.) So, in X there's no way to know what speakers the iBook thinks it's using.
I haven't tried resetting the PMU; it didn't seem from the KB article on PMU reset that doing that would help this problem. (I'm cautious about fiddling with the PMU.) But, the battery is old, doesn't hold a charge very long, and we need to get a new one. We normally use the power adapter, anyway. So maybe a PMU reset would do something.
I did ask my husband - an experimental physicist - if the speakers could have been damaged by too loud a sound when he was working with Toast, and he said the the sound circuitry should prevent that, unless there were a design flaw.
On further thought, I probably won't bother reinstalling the systems - just wait until I get back to civilization next week and take it to an Apple Store. (The only authorized service center within 100 miles of this house is one CompUSA 50 miles away.)
Dorothy

Internal Speaker Laptop NOT WORKING

Hi Guys,
I have problem with my laptop that is HP Compaq 510, OS: window 7 Ultimate 64-bit.
My speaker internal laptop is not working. However, for speaker output to headphone jack is working. So, it will be grateful if anyone can give solution and suggestion for this problem.
Thank in advance
Beezs

Hi,
Since the headphone is working,its not a problem with the OS or the sound drivers on the computer.
Check the volume.
For me it looks like a Hardware issue. Contact the HP Service center if the computer is in warranty. They will fix this issue for you
Regards
MathewT
**Click on the KUDOS Star on the left to say "thanks" for helping!**
**Please Mark a Reply "Accept As Solution" if this has resolved your issue.**
I Work On Behalf Of HP

Brand new ipod-touch internal speaker suddenly stopped working all-together? Please help!

Just got my brand new, white Ipod- Touch and was surfing on youtube, watched a video and mid video the sound just vanished. now no sounds come from the internal speaker whatsoever, but headphones still work. I have tried restarting it as well as reseting, can anyone help me?! Thanks a lot!

That sounds like a mechanical problem. You might want to insert and remove the headphone plug several times and see if it fixed the issue. If it does not, call Apple. 800-275-2273 in the U.S.A. and I think Canada.

Internal speaker just stopped working

Hello,
after ot stoped working, I went to System Prefs, Sound. internal speaker is no longer an output option. oh boy.

See if this helps,
Open Activity Monitor (in Utilities)
Select "All Processes" from the drop-down list at the top
Click on the process called "coreaudiod"
Click on "Quit Process"
Click "Force Quit"
It will go away and come back again, and the sound should start working. No need to reboot.

My daughtrts ipad 2 only recognises headphones. and the internal speaker will not work. we have reset the system three times, cleaned out the headphone jack, and chrckrd the side switch above the volume. alos we ensured it was not in do not disturb mode

On our ipad the speaker has quit working. Sound is only heard when you have head phones plugged in. We have reset the system three times cleaned out the headphone jack. Changed languages and rest but nothing works. This ipad is important to our daughter it is her tool to communicate with us and now it is not working please help

You've done well with troubleshooting so far. Next step would be to back up and then restore from iTunes. Good luck!

G4 MDD 1.42 ghz dual, internal speaker does not work

I rebuilt a G4 MDD 1.42 ghz dual processor from a machine that did not boot. Had to replace the power supply and install the proper ram. The machine boots now and works fine. It does not make the chime on startup through the internal speaker. It does chime when externals are plugged in. I have checked all the settings in system preferences and everything looks okay. Checked the audio midi controls in utilities and all checked out. Reset the pram and still no internal speaker. Could the speaker itself be the culprit or am I missing something?

I suspect the trouble is with the jack, not the speaker.
Some Mac notebooks suffer a jammed muting contact within the jack that may be happening with your tower. Did you Open System Preferences > Sound, click the "Output" tab, and see if the internals show up? I know you say you checked the settings but, if the internal speaker is not clearly indicated on that tab, the mute contact is probably jammed.
People with notebooks suffering this are very often able to free it by inserting a plug and GENTLY wiggling it from side to side and up/down.

Speaker don't work

My iPhone don't work the speakers and the ringer and other don't function please i want the know its damage.

it's a hardware issue read more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more hits
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

TS1631 My phone speaker don't work

My phone speaker don't work

no i haven't, i was listening to some music in the car (connected through a wire) when i disconnected it , no more sounds from the phone, only when i plug my hear phones that then i can hear anything

International calls don't work ....... ??????????????.............?????????

Dear any help for Dial Peer to international Calls i can not do any international calls .... i did these commands:
translation-rule 5
Rule 1 ^001 1
dial-peer voice 5 pots
numbering-type network
destination-pattern 00
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing called 5
port 7/0:D
national calls are ok.
any help please to do dial peer for international calls?
thank you

ok man,
i attached my debug files for Q931 but i saw many causes for drop calls (no route, unassigned number,...) see them please.
i don't know where the problem exact i moved the calls to other GW it worked fine, but when i use AS5400 as my GW the calls failed.
can advise for using translation-profile and rules i did not work before with these commands.
Just to be in mind i have local destination numbers i used to:
translation-rule 1
Rule 1 ^03 3
Rule 2 ^06 6
Rule 3 ^07 7
Rule 4 ^05 5
Rule 5 ^02 2
Rule 6 ^5050#9622 2
Rule 7 ^5050#9623 3
Rule 8 ^5050#9627 7
Rule 9 ^5050#9625 5
Rule 10 ^5050#9626 6
dial-peer voice 1 pots
destination-pattern .T
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing called 1
port 7/0:D
now how i can use translation-profile and rules for those and international calls?
thank you for help.
Tareq

My internal speaker don't work

Similar Messages

Maybe you are looking for