My internal speaker no longer shows as an output option; has anyone experienced this?
My internal speaker no longer shows as an output option; has anyone encountered this before?
Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers / Headphones
Make sure Mute is not enabled.
2. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it.
Option click the speaker icon, if present and select Internal Speakers.
Similar Messages
-
My hardrives stoped showing up in the library, has anyone had this before? what do i do?
my hardrives stoped showing up in the library, has anyone had this before? what do i do?
Hard drives do not appear in 10.1 like they used to in previous versions.
You can open and close libraries as needed and you can store them and move them as needed. -
Adobe CS6 Bridge no longer will preview .tif files. Has anyone seen this and know how to correct?
Adobe CS6 Bridge no longer will preview .tif files. Has anyone seen this and know how to correct?
No problems here viewing TIFF files in Bridge. Try restoring the Bridge preferences. IMMEDIATELY after launching Bridge hold down Ctrl+Alt+Shift (Windows) or Cmd+Option+Shift (Mac). You'll get an option to restore preferences.
-
The audio is coming through my speakers fine, but there is no image of the TV Show or Film. Has anyone else had this issue and solved it?
I had the same thing recently when trying to play a video held in my itunes movies folder on my Macbook pro, through the Apple tv airlink to watch on my TV. I could hear the sound play back fine, but there was no picture/video.
It then dawned on me that the 'Apple tv' box can only show 720p resolution, and I was trying to play back a full hd (1080) video. I converted my footage to 720 (or apple tv version), and it now streams and plays perfectly from macbook to AppleTV. -
My iPages has frozen up whilst importing a Word file into iPages. I can no longer use this software. has anyone seen this before. Thanks, Ken
Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love -
Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe> -
In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger. -
I am unable to send to an address that I have been using for a long time. All aspects have been investigated but with no solution ,has anyone encountered this problem before?
Hi Eric,
The message seems to totally disappear. It is going to an AOL customer in UK. I changed their address to start with a lowercase letter & the message was returned to me by AOL as undeliverable, I then changed the first letter of the address beck to upper case, the same I have been using for years, but again it disappeared.
I appreciate any help you can give me. Tks Gord. -
when I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?
Hi Terence, When I am uploading photos from a memory card,not all of the photos show up on I photo as a photo image, but show up as a dotted square line. For example, I just added 12 photo from two days. The first day had 5 photos, but only 4 show up as images, then there is 1 as dotted a square. The next day, there 7 images, with only 4 showing up as photos, and three as the dotted squares.
I am using I photo 11, 9.1.1.
Thank you -
My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?
Hi
SlideShow in iDVD has a 99 photo limit - more than this and all sorts of error occures.
One can have more than one SlideShow on a DVD = X times 99 photos.
or assemble SlideShows in a movie editor (no limit at least not under 650 photos)
(only limit is Time in iDVD (movie time + MENU time --- 60 min or 120 min on SL-DVD and about twice on DL.-DVD )
I use
• iMovie up to HD6 - or -
• FinalCut any version
As they will give a better quality than iMovie'08 or 09 or 11 can do.
Yours Bengt W -
I upgraded my iMac to Mountain Lion and now my Canon Pixima MP500 will not open because PowerPC apps are no longer supported! Has anyone experience this problem?
Correct. Applications designed to run on the old PPC Macs (which Apple stopped making in 2005) cannot run on Mountain Lion.
You need to update your printer driver:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US -
My iphone screen showed green colours then reset when I went into facebook after a random email address had replaced mine? I reset it, then it went back to normal but has anyone had this problem?
Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
I can send text messages within Australia without difficulty but many of my international texts are not delivered. Has anyone had similiar problems.
SMS text messages are handled by your cellular carrier.
Check with them. -
Why does my internal speakers no longer show up in my sound preferences?
In February, I updated my MBP 15" to 10.7.3. After restarting my system, the internal speakers were no longer listed in my available outputs under my sound preferences. I wasted an hour of my time talking to phone support only to hear the same stuff I had found online to try to troubleshoot the problem. Finally they told me to go to the Genius Bar. I went to my local Apple store where they proceded to look at it for about an hour and in the end told me the way to fix it would be to just wipe the harddrive and reinstall OS X. I couldn't afford to do that at the time due to needing the computer for grad school and chose to wait till after school let out to do this. Now I have wiped the harddrive twice and reinstalled and STILL don't have sound.
Does anyone have any ideas of what I can do to try to fix this?It's a longshot, but you could try this:
Resetting your Mac's PRAM and NVRAM
Maybe you are looking for
-
Problem with charset ISO-8859 with dinamic action
Hello I migrated my application that was Apex 3.2, and now Apex is 4.2.3, but a have a problem when I'm use Dynamic Action with ISO-8859. When I used a filter "ação" in dinamic action filter mounted by the apex presents 'aà § à £ o.' If I force use o
-
HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID?
HI. HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID???? GABRY =)
-
Korean Characters and External Table
Hi Experts. We have data exported from teradata through fexp utility. The file that we export has Korean character in it. When we are trying to load the file to Oracle Db (10.2) through external tables. But We are not able do a select query itself fr
-
Report Required :Salary changes no of time in year.
Hi Experts, My client wants a report: From 01.04.2009 to 31.03.2010 (All Active Employees) How many times the salary has got revised for the employee. Note: Because they have policy of hiring the employee on probation for 3 or 6 months once the compl
-
Oracle 11g Database Schema problem
Hi I have installed the Enterprise Edition of Oracle 11g on windows XP SP2. I log in to Enterprise Manager. When I click on the schema tab I get the following error message. Error Internal Error has occured. Check the log file for details. Does anybo