My international data roaming is not working in china, why?

I am currently traveling in mid-east china, but my data roaming is not working. it shows good single bar, but when I try to receive emails (from gmail or AOL account), it gives me error messages. it is very frustrating. it has been 3 days that I can't retrieve emails. I do have voice service though.

You might need to contact VZW for some trouble shooting help. Unless you are using a 3rd party simcard...then you might have to check with them to make sure their isn't an issue.

Similar Messages

  • Iphone data roaming - option not working ( urgent please help)

    I am going on a long holiday (3months) to various countries from Canada and I will be using my phone only for the first leg of the journey for 15 days just to keep in touch with my family to say I'm safe and all. I dont want to unlock or jailbreak my phone.
    Is there a way to disable the 3G to avoid roaming charges ( Since I am on a contract I cant ask my provider to block it) I turn on the data roaming option but the 3G sign is still shown and its still connecting to the network
    Is there any other way

    "I turn on the data roaming option but the 3G sign is still shown and its still connecting to the network"
    Are you out of the country when you do this? It won't disable data when you are in your home network.
    From the manual:
    "Data Roaming turns on Internet and visual voicemail access over a cellular data
    network when you’re in an area not covered by your carrier’s network. For example,
    when you’re traveling, you can turn off Data Roaming to avoid potential roaming
    charges. By default, Data Roaming is turned off. "
    BTW, I'm not sure how helping you avoid a roaming bill is urgent. Some have much more "urgent" problems, like crashes, unresponsive iphones, etc.

  • AT&T service iPhone International Data Roaming - excessive fees

    For info:
    I mailed below message to AT&T Customer care: [email protected]
    Am sure for many international travelers this will be a nice customer service improvement.
    Send them a mail as well. It may help all of us traveling overseas.
    "I do have following concerns on AT&T's iPhone International Data roaming service.
    I voiced them as well to your service center reps.
    The feature is a nice useful service.
    But I encountered a number of flaws:
    - Long time for service calls.
    - Misrepresentation of costs (overcharge of 150%), and
    - Resulting in excessive costs.
    I am fully aware of all stories on international calls/data roaming with iPhone (ref suggestions on AT&T FAQ)
    No need to fill me in on that.
    Here is what happened:
    - before a month of overseas travel (mid Dec - mid Jan), I had the service activated:
    it took me 1/2 hr waiting at the phone before I got to speak a AT&T service rep.
    - I was told the service will be charged pro rata (ie days of usage) and for a month travel that would be 25 USD.
    and I had to call back upon return to disactivate/cancel service.
    - Upon return I called back AT&T service center , again a long on hold waiting time,
    and I was told I needed to wait for my next invoice statement to see the my completed overseas period on the bill, and could only cancel the service then.
    - This week I received this next statement, called back AT&T service center , again a long on hold waiting time,
    and now I was told the service would be cancelled only as from this very day, and no retroactive cancellation.
    I was told the reason is to allow bills from overseas carriers to be taken into account for the invoicing and the international feature.
    In other words, if I had cancelled immediately upon return, overseas charges booked into my bill after my cancellation call (but incurred before) would be hitting me at full charge.
    Thanks for doing so, but all this results in a 2.5 months service period for this feature, while I had only wished a 1 month service period and was told I would incur only a 1 month service charge !
    A number of suggestions,
    - make the feature true pro rata charges, now it is a misrepresentation and an excessive overcharge.
    - AT&T has a nice individual account profile online, why can one not activate/disactivate the service there ? Will be much faster.
    - or have the service activated with a separate credit card purchase/billing ?
    Hey, and advertise it on iPhone/Apple.
    Loads of people who are traveling overseas will be interested ! "
    Cheers
    Tom

    DexGtr,
    If you go to Settings -> Network, there is an option to turn off data roaming.
    However, if she hasn't updated her firmware since she purchased it that option may not be available.
    iPhone Firmware updates are downloaded via iTunes. Connected the iPhone to iTunes, and if it doesn't prompt you to update, then click on "Check for Updates" in the iPhone Summary tab.
    Hope this helps,
    Nathan C.

  • Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

    Here is the settings:
    SharePoint 2010 with SQL server 2008 reporting services configured
    When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
    The data parameter is set as "date and time" type and field name equals the col name in the SP list
    When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
    Is any step missing?
    Thanks for any advice !

    Hi ,
    How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
    Have you tested if other type parameter worked?
    Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
    http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Daniel Yang
    TechNet Community Support

  • I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

    i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

    mcbsousa wrote:
    hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
    Sending by Dropbox where, To who, to what computer? As your does not start up.
    You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
    Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

  • Pie chart with two measures and date dimension navigation not working

    Hi Experts,
    Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
    Thanks
    V

    Hi Deepak,
    I had time dimension in the RPD.
    I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
    I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

  • Oracle date parameter query not working?

    http://stackoverflow.com/questions/14539489/oracle-date-parameter-query-not-working
    Trying to run the below query, but always fails even though the parameter values matches. I'm thinking there is a precision issue for :xRowVersion_prev parameter. I want too keep as much precision as possible.
    Delete
    from CONCURRENCYTESTITEMS
    where ITEMID = :xItemId
    and ROWVERSION = :xRowVersion_prev
    The Oracle Rowversion is a TimestampLTZ and so is the oracle parameter type.
    The same code & query works in Sql Server, but not Oracle.
    Public Function CreateConnection() As IDbConnection
    Dim sl As New SettingsLoader
    Dim cs As String = sl.ObtainConnectionString
    Dim cn As OracleConnection = New OracleConnection(cs)
    cn.Open()
    Return cn
    End Function
    Public Function CreateCommand(connection As IDbConnection) As IDbCommand
    Dim cmd As OracleCommand = DirectCast(connection.CreateCommand, OracleCommand)
    cmd.BindByName = True
    Return cmd
    End Function
    <TestMethod()>
    <TestCategory("Oracle")> _
    Public Sub Test_POC_Delete()
    Dim connection As IDbConnection = CreateConnection()
    Dim rowver As DateTime = DateTime.Now
    Dim id As Decimal
    Using cmd As IDbCommand = CreateCommand(connection)
    cmd.CommandText = "insert into CONCURRENCYTESTITEMS values(SEQ_CONCURRENCYTESTITEMS.nextval,'bla bla bla',:xRowVersion) returning ITEMID into :myOutputParameter"
    Dim p As OracleParameter = New OracleParameter
    p.Direction = ParameterDirection.ReturnValue
    p.DbType = DbType.Decimal
    p.ParameterName = "myOutputParameter"
    cmd.Parameters.Add(p)
    Dim v As OracleParameter = New OracleParameter
    v.Direction = ParameterDirection.Input
    v.OracleDbType = OracleDbType.TimeStampLTZ
    v.ParameterName = "xRowVersion"
    v.Value = rowver
    cmd.Parameters.Add(v)
    cmd.ExecuteNonQuery()
    id = CType(p.Value, Decimal)
    End Using
    Using cmd As IDbCommand = m_DBTypesFactory.CreateCommand(connection)
    cmd.CommandText = " Delete from CONCURRENCYTESTITEMS where ITEMID = :xItemId and ROWVERSION = :xRowVersion_prev"
    Dim p As OracleParameter = New OracleParameter
    p.Direction = ParameterDirection.Input
    p.DbType = DbType.Decimal
    p.ParameterName = "xItemId"
    p.Value = id
    cmd.Parameters.Add(p)
    Dim v As OracleParameter = New OracleParameter
    v.Direction = ParameterDirection.Input
    v.OracleDbType = OracleDbType.TimeStampLTZ
    v.ParameterName = "xRowVersion_prev"
    v.Value = rowver
    v.Precision = 6 '????
    cmd.Parameters.Add(v)
    Dim cnt As Integer = cmd.ExecuteNonQuery()
    If cnt = 0 Then Assert.Fail() 'should delete
    End Using
    connection.Close()
    End Sub
    Schema:
    -- ****** Object: Table SYSTEM.CONCURRENCYTESTITEMS Script Date: 1/26/2013 11:56:50 AM ******
    CREATE TABLE "CONCURRENCYTESTITEMS" (
    "ITEMID" NUMBER(19,0) NOT NULL,
    "NOTES" NCHAR(200) NOT NULL,
    "ROWVERSION" TIMESTAMP(6) WITH LOCAL TIME ZONE NOT NULL)
    STORAGE (
    NEXT 1048576 )
    Sequence:
    -- ****** Object: Sequence SYSTEM.SEQ_CONCURRENCYTESTITEMS Script Date: 1/26/2013 12:12:48 PM ******
    CREATE SEQUENCE "SEQ_CONCURRENCYTESTITEMS"
    START WITH 1
    CACHE 20
    MAXVALUE 9999999999999999999999999999

    still not comming...
    i have one table each entry is having only one fromdata and one todate only
    i am running below in sql it is showing two rows. ok.
      select t1.U_frmdate,t1.U_todate  ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID  AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf 
       from  [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
       on t0.DocEntry = t1.DocEntry
       inner join ohem t2
       on t2.empID = t0.U_empid  where  t0.U_empid between  '830' and  '850'  and t1.U_frmdate ='20160801'  and  t1.u_todate='20160830'
    in commond promt
      select t1.U_frmdate,t1.U_todate  ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID  AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf 
       from  [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
       on t0.DocEntry = t1.DocEntry
       inner join ohem t2
       on t2.empID = t0.U_empid  where  t0.U_empid between  {?FromEmid} and  {?ToEmid} and t1.U_frmdate ={?FDate} and  t1.u_todate={?TDate}
    still not showing any results..

  • Use member on data form does not work

    Hello,
    "Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
    Who is resolve this problem?
    Version hyperion: 11.1.2
    Thanks

    I don't have a solution for you but more steps to solve the problem
    You are ultimately on the right track in some ways but break it down into it's components.
    The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
    So I would strip this baby down to its bare bones then build it back up.
    1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
    Is it successful: go to 2
    If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
    2) Run the calc outside the form but with variables included. Did it prompt you correctly.
    Is it successful: go to 3
    If it isn't. What is wrong with the variable
    3) Now attach it to the form but don't hide the prompts
    Still good go to 4
    4) hide the prompts and run on save
    And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
    This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

  • I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings

    I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings.
    Has anyone faced a problem like this!!!

    No. If you go Settings App > General > Reset > "Erase All Content and Settings", you will have the same iOS that was on the iPhone when you tapped the Erase button. If you believe your iPhone is Jailbroken, then this will not work. If you use iTunes on computer, this will put iPhone to current iOS which is iOS 7.0.2

  • Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

    Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

    try a reset.
    Hold the home & power buttons down simultaneously until you see the Apple logo appear.
    Note: no data will be lost.

  • Droid Razr Maxx HD Data & SMS does NOT work in South Korea

    If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...

    I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!

  • My apple id is not working in itunes. why?

    my apple id is not working in itunes. why?

    LeesaHeeley wrote:
    When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
    When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
    Good luck.

  • Am purchase iphone4 in UAE, but not work in india ,why?

    am purchase iphone 4  in UAE, but it is not working in india  why?

    If you did not purchase an unlocked iPhone then it is locked to the carrier you bought it from. I am assuming the carrier in India is different than in the UAE. If so you need to contact the original carrier you bought it from and ask them to unlock it.

  • After download ios5 my iPhone dose not  work like before why?

    After download ios5 my iPhone dose not  work like before why?
    i have iphone 3gs

    OK this is the issue after download ios5 my phone goes crazy like when i turn on my 3G i can`t  call someone and i cant even check my email i don't know why ...so after all this problem i have to turn 3G off and than call to my friend so why it work like this ?
    i restore my phone ...i restore as a new phone but still i have the problem ....

  • Model A1524 Unlocked, not working on China Telecom

    JUst bought iPhone 6+ A1524 unlocked in Singapore, but not working on China Telecom.  Is this the right version or is there a trick to get phone to recognize CDMA networks?

    For any phone to work on CDMA networks it must be provisioned by the carrier. They will need to add the MEID of the phone to their database. However, I believe that all (or most) of the carriers in China are GSM, not CDMA.

Maybe you are looking for