My internet freezes occasionally after using iphoto

Occasionally, after using iphoto, particulary the photo books, the internet will freeze. The only way to get going again, is to reboot the computer.

How is that related to Firefox support?

Similar Messages

Freeze up after using for awhile...

I am having issues with my iBook freezing up after using for awhile. It will start up just fine, programs run just fine, but when i've been on the internet for a while (or typing in Word or anything requiring a significant amount of memory)my iBook freezes up and there is a periodic clicking noise coming from the lower left hand side (by the vent). I've tried resetting the memory and that didn't seem to help anything. Once the computer is frozen it is down for a while. It will only start up after it has been disconnected from any power source overnight. Then everything runs fine for a while and then the clicking begins again. Does this sound like an overheating issue, harddrive issue or software? Any help would be greatly appreciated!
iBook G3 (white) Mac OS X (10.3.9)

Thanks for all the help! Here's an update.
My iBook now refuses to safe boot but instead will boot up normally! I haven't had any issues with it freezing up but I have only been using iTunes to transfer music to my ipod.
The S.M.A.R.T. status of my drive is "verified".
When attempting to boot into "safe mode", the loud clicking happens immediately but stops after about a minute or two and then the grey apple and progress indicator appear. It will stay like this for a couple of minutes and then it automatically restarts and will boot up into the normal mode.
When attempting to repair my drive via the system disk, I get the error message that the underlying task reported failure on exit. Written in red in the message window is "Keys out of order".
Also, the archive and install feature is not working. It tells me that there was an installation error and to retry installation.
I will look into expanding the memory and additional disk repair software.
I connect to the internet via ethernet(cable modem) and/or airport.
Thanks again for all the help!

HT5037 problems after using iPhoto library upgrader

i can't open iPhoto library after using iPhoto library upgrader for a disk with a few pictures from an old iPhoto library on it. please help

did you execture the library upgrader (in the APplications folder ==> utilities double click on it)? What exact problem are you haveing?
LN

30GB Ipod freezing up after using iHome

I bought myself an iHome unit to play my iPod when I'm hanging around at home. The unit works fine and the iPod plays fine. What I have noticed is that after using it for a few hours when I then plug my iPod into my computer to update the information it freezes up in the do not disconnect screen. To make matters worse my computer freezes up until I disconnect the iPod unit. I end up having to reset my iPod which does work but I was wondering if anyone else has had the same problem and if so is there something that I could be doing to make sure that it doesn't happen again?

Try resetting the iPod.
Make sure the Hold Switch is not operated (not locked) and then hold down the Select (centre) and Menu buttons until the Apple Logo appears on the screen.
If that does not work then connect the iPod to the computer and open iTunes.
Go into the iTunes preferences and check that the Album Artwork option is selected. If it is then, unselect it and click OK. Once the iPod has been updated go back to the option and turn it on again, this might force the iPod to update the artwork.
Ian

IPhoto 5 not open after "using" iPhoto 6

Hi
We have two Laptops at home, one iBook G4 (OS X 10.3.9 & iPhoto 5.0.4 (263)) and one MacBook (OS X 10.4.10 & iPhoto 6.0.6 (322)). After copying the library (via ehternet) from the iBook to the MacBook we have a problem: On the MacBook - after automatic actualising of the library - everthing is o.k. and all pic's an keywords are there. But starting iPhoto on the iBook produced a messege, that the library can't be open with iPhoto 5 because it was opend by a newer version of iPhoto (what we didn't do to our knowledge) and now this newer version should be used (which does not exist on the iBook). Something must have gone wrong while copying the library. Can we change back the library on the iBook to iPhoto 5-standards or is an upgragde of iPhoto on the iBook the only solution?
Any help is very welcome. Thanks.
PS: hope my english ist understandable

Marcel79
Welcome to the Apple Discussions.
Make sure the two Macs are disconnected, then, go to the Pictures Folder on the iBook. There you will find the iPhoto Library Folder. Have a look inside - but don't change anything! Is there a file there called
library6.iphoto
If so, then indeed that Library has been updated and the only solution is to upgrade the iPhoto on the iBook.
However, if there is inly a file called
library.iphoto
then double click on it and see if the Library will open.
Regards
TD

2007 MBP Running Hot and Freezing occasionally after 10.6.3

This is obviously not normal. Anyone else experiencing this or know of the cause or a fix?
It's gotten so hot I've resorted to placing a towel in my lap. iStat says the CPU is running at 148 degrees, all the time, with the GPU frequently hitting 160, and both fans are running full bore.
The freezes come and go, and usually only last for 20-30 seconds, but when they do pop up, they happen frequently, as many as 10 times per hour.
I don't think I am doing anything differently than I have always done. No new software, etc.
Thanks much in advance for any suggestions.

I don't have 10.6 on anything but I believe this works for SL. In Applications > Utilities you will find Activity Monitor (hereafter AM to avoid the extra typing). Launch it and look at its "Show" selector at the top of the window. By default, AM launches to "User Processes" and that seldom shows enough. Change it to "All Processes" to get a good look at the true background picture.
Look at the columns AM presents. Find the "%CPU" column and click on it to sort the list by usage. When the computer is idling (you've quit all applications so only the Finder is active), no process should be more than 4-6 percent (might be a little different in SL). Basically you're looking for things that are using double-digits of the CPU cycles when the computer seems to be at idle..
Processes with "mds" in the name are related to Spotlight indexing but don't run that often after the initial install. If "syslogd" is running at high numbers, something is writing a bunch of stuff to system.log. I had that happen on my MBP with the demo for the game "Prey." Even when the computer was only idling, the demo continued to write to the log file and ballooned it from its usual size of ~250K to over 60MB, and ran the heat up to boot. Deleting the demo and a restart cured that insanity.
I found a process related to Safari 4 called Safari Webpage Preview Fetcher that ran a lot. It's how Tops Sites gets page previews. I now avoid using Tops Sites, especially on our slower G4 Macs which constitute the majority of our household Mac-ness. That process really gummed the works in those older Macs, all running 10.4.11.
You might want to repeat the question in the Snow Leopard forums. Someone more familiar with SL may see a pattern in the shutdowns and stalls. The 10.6 forums are here:
http://discussions.apple.com/category.jspa?categoryID=263
Keep us posted.
Allan

Can't open iPhoto after using iPhoto library upgrader

I used the iPhoto library upgrader today, hoping that I could then use a newer version of iPhoto. I have iPhoto 6.6 I think. But now iPhoto won't open, so I can't see any of my photos. Where can I download a newer version of iPhoto so I will be able to see my photos again? My iMac is running OS X 10.7.5 and cannot be upgraded to a newer operating system as it is a late 2006 iMac. Please help, I am so upset at losing all my family photos I can barely type this.

1. Make a back up first thing.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
2. If you have iPhoto 6 why are you using the upgrader?

Can no longer login after using iPhoto

I have a teacher's white Macbook running OS X 10.5.5 when they login, they put in the id and password, click login, the field turn gray and the machine hangs. We've left it for about 1.5 hrs, but no change. This happens with the teacher or admin account. This happened last week, and for the sake of time, I did an archive install. It seemed to resolve the problem, until she logged into iPhoto printed some pictures, logged out of iPhoto and her account. Boom, she can't login again.
A detail that did not seem important last week has surfaced again, she was working in iPhoto both times, logged out, then at the next login the problem appears. I booted via Firewire from another machine to look at system log.
This chunk of kernel messages appear that don't normally show up:
Nov 13 08:15:06 wsheetz kernel[0]: AirPort: Link Up on en1
Nov 13 08:15:11 wsheetz kernel[0]: hardware didn't idle, giving up: 00000150 00000154 4084.
Nov 13 08:15:11 wsheetz kernel[0]: PRB0_TAIL: 00000150
Nov 13 08:15:11 wsheetz ARDAgent 67: ******ARDAgent Launched******
Nov 13 08:15:11 wsheetz kernel[0]: PRB0_HEAD: 00000150
Nov 13 08:15:11 wsheetz kernel[0]: PRB0_STRT: 02120000
Nov 13 08:15:11 wsheetz kernel[0]: PRB0_LEN: 00000003
Nov 13 08:15:11 wsheetz kernel[0]: SRB0_TAIL: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: SRB0_HEAD: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: SRB0_STRT: 02121000
Nov 13 08:15:11 wsheetz kernel[0]: SRB0_LEN: 00000003
Nov 13 08:15:11 wsheetz kernel[0]: PGTBL_CTL: 3ffc0001
Nov 13 08:15:11 wsheetz kernel[0]: PGTBL_ERR: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: EXCC: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: IPEIR: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: IPEHR: 7d9d003f
Nov 13 08:15:11 wsheetz kernel[0]: INSTDONE: 7fffffc0
Nov 13 08:15:11 wsheetz kernel[0]: NOPID: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: HWSTAM: ffffffff
Nov 13 08:15:11 wsheetz kernel[0]: IIR: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: IMR: fffdff1f
Nov 13 08:15:11 wsheetz ARDAgent 67: ******ARDAgent Ready******
Nov 13 08:15:11 wsheetz kernel[0]: ISR: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: EIR: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: EMR: ffffffff
Nov 13 08:15:11 wsheetz kernel[0]: ESR: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: INSTPM: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: INSTPS: 800f04ce
Nov 13 08:15:11 wsheetz kernel[0]: ACTHD: 00000150
Nov 13 08:15:11 wsheetz kernel[0]: MEM_MODE: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: DMAFADDP 02120150
Nov 13 08:15:11 wsheetz kernel[0]: DMAFADDS 00000000
Nov 13 08:15:11 wsheetz kernel[0]: MI_STATE 00000040
Nov 13 08:15:11 wsheetz kernel[0]: PR0_STR: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: PR0_END: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: CCID0: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: CTXSIZEPAL: 00000009
Nov 13 08:15:11 wsheetz kernel[0]: CTXSIZENOPAL: 00000003
Nov 13 08:15:11 wsheetz kernel[0]: 3D_CTL: 00000307
Nov 13 08:15:11 wsheetz kernel[0]: CHUNK_CTL: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: HWB_TAIL: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: HWB_HEAD: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: HWB_START: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: HWB_CTL: 003ff000
Nov 13 08:15:11 wsheetz kernel[0]: BIN_CTL: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: BIN_SCENE: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: BMP_BUFER: 00000000
Nov 13 08:15:11 wsheetz loginwindow33: Login Window Started Security Agent
Nov 13 08:15:11 wsheetz kernel[0]: BMP_GET: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: BMP_PUT: 00000000
Nov 13 08:15:11 wsheetz kernel[0]: ICS: 00000003
Nov 13 08:15:12 wsheetz kernel[0]: ISP: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: FSI: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: SSI: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: FST: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: SST: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: INTC: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: IDLC: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: SVDebug 000000ff
Nov 13 08:15:12 wsheetz kernel[0]: SHDebug 00080000
Nov 13 08:15:12 wsheetz kernel[0]: SFDebug 018781e0
Nov 13 08:15:12 wsheetz kernel[0]: SEDebug c0000080
Nov 13 08:15:12 wsheetz kernel[0]: WMDebug 00400000
Nov 13 08:15:12 wsheetz kernel[0]: IZDebug0 20000020
Nov 13 08:15:12 wsheetz kernel[0]: IZDebug0 00000000
Nov 13 08:15:12 wsheetz kernel[0]: PIDebug0 01807f88
Nov 13 08:15:12 wsheetz kernel[0]: PIDebug1 00000000
Nov 13 08:15:12 wsheetz kernel[0]: PIDebug2 01807f88
Nov 13 08:15:12 wsheetz kernel[0]: DIPDebug 05ef7e17
Nov 13 08:15:12 wsheetz kernel[0]: PLDebug 00000180
Nov 13 08:15:12 wsheetz kernel[0]: DGDebug 00000010
Nov 13 08:15:12 wsheetz kernel[0]: QCDebug 00000000
Nov 13 08:15:12 wsheetz kernel[0]: FTDebug 00000000
Nov 13 08:15:12 wsheetz kernel[0]: DMDebug 00000010
Nov 13 08:15:12 wsheetz kernel[0]: SCDebug 003c0400
Nov 13 08:15:12 wsheetz kernel[0]: FLDebug 3c100040
Nov 13 08:15:12 wsheetz kernel[0]: BYDebug 00055440
Nov 13 08:15:12 wsheetz kernel[0]: PSDebug 00240000
Nov 13 08:15:12 wsheetz kernel[0]: CCDebug 8cac1000
Nov 13 08:15:12 wsheetz kernel[0]: statusISR: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: statusPRB0_HEAD: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: statusSRB0_HEAD: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: statusSRB1_HEAD: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: statusHWB_HEAD: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: statusSTAMP: 00000000
Nov 13 08:15:12 wsheetz kernel[0]: display: Not usable
Nov 13 08:15:12 wsheetz kernel[0]: IOHIDSystem: Seize of AppleHIDKeyboardEventDriver failed.
Nov 13 08:15:12 wsheetz com.apple.KerberosAutoConfig78: Couldn't find KerberosClient config record
Nov 13 08:15:15 wsheetz kextd10: writing kernel link data to /var/run/mach.sym
Nov 13 08:15:15 wsheetz com.apple.KerberosAutoConfig80: Kerberos configuration is up to date
Nov 13 08:30:12 wsheetz DirectoryService11: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Server not found in Kerberos database)
Nov 13 08:45:12 wsheetz DirectoryService11: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Server not found in Kerberos database)
Nov 13 08:46:03 wsheetz authorizationhost75: MechanismInvoke 0x11a320 retainCount 2
Nov 13 08:46:03 wsheetz SecurityAgent77: MechanismInvoke 0x101620 retainCount 1π
It looks like maybe a kernel panic with all the register info, but I'm hardly an expert with this stuff.
No, I have not applied iLife 8.3.1 update it wasn't out last week. I did post this to the Leopard Install and Config area, no response, so since iPhoto appears to be a contributing factor, I thought I'd ask here
Any suggestions?

Hi Andrew!
Sign out of  Discussions.
Delete the Apple Cookies.
Clear the Cache in the browser.
Quit the browser.
Try to sign in with the old account.
If that doesn't work, try this procedure.
Delete the browser's Apple Cookies, and clear the browser Cache.
Go to the Sign In Page.
Do not enter an Apple ID or Password.
Click on the Click Here link.
On the page that opens, do not enter an Apple ID, but click on the "Forget your Apple ID link.
Enter the required information, and click Continue.
ali b

After Using iPhoto diet iPhoto 5 doesn't work.

I removed all duplicates and iphoto just grinds and grinds. It can't display most thumbnails. The color wheel always spins. What happened?

hello lori,
i've had similar problems with iphoto diet - though not with crashing. unfortunately, in my paranoia to not lose any photos, i've imported similar photos several times into iphoto. iphoto diet does strange things sometimes - in my experience, it doesn't always remove the proper duplicate, etc. so i've resorted to manually sorting each of 15K (ouch!) photos to remove the correct duplicate. i do this by sorting through the photos for different years. i've started working on 2004, and wanted to start with a clean slate and erase all the photos, then only import the orinigals i want, but iphoto 'residually' shows the saved thumbnails (i think they're thumbnails b/c they are only about 16kb, and don't open to full size - i get the 'white screen' that others have mentioned). i entered the iphoto folder (i know - a no no, but didn't know how else to erase 2004 photos) and deleted the 2004 folder.
sorry for being so wordy - can you suggest a way to eliminate my 2004 photos in a way that would be iphoto-friendly ?
thanks for any suggestions.
-vince

Ipad 2 internet freezing up

My Ipad 2 is internet freezes up after about 15 mins on the internet.
Any suggestions????

The internet can't freeze up, but an app that accesses the internet can have a problem or the internet connection via wi-fi or cellular with a 3G iPad can be lost.
If an that freezes up, which app?

My iMac 27'' freezes after I use iPhoto

I just bought my iMac27'' last week and I notice thta when I use iphoto it freezes the computer.

I can only say that the latest and all previous versions of iPhoto are very stable on both my iMac's, a 2006 1.83 GHz Core Duo and a 2010 Mac Mini, and that it shouldn't be happening. It is possible that there is either a hardware or software problem with your new iMac and/or Lion and I think that you should make an appointment with your local Apple Store or authorized retailer where you bought the iMac and have it checked out.
Apple - Support - iMac - Service FAQ

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

I let Firefox sit on my desktop for about five minutes, and it finall allowed me to use it. That is EXTREEEMELY slow. What is the problem?

Internet freezes with Safari, Firefox & Chrome, but not when using MS IE

When using my macbook wirelessly and am in the Mac OS, my internet freezes after 5 minutes, doesn't matter if I am using Safari, Firefox or Chrome. If I shut down and boot up Windows XP and use IE, it does not freeze up. I use my iMac with the same router wirelessly and never have any issues with Sarari... Can anyone suggest what I should try? I have removed and reloaded Safari, Firefox and just tried Chrome, with the issue still happening...
Thanks,

The web sites visited are pretty much the same on either the iMac or MacBook. These are well known sites for the most part. I always keep updates current with any of the software I use including Adobe...

[SOLVED] Getting freezes after using dwm for some time and exiting it

Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
This is my /var/log/Xorg.0.log
[ 7.573]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.573] X Protocol Version 11, Revision 0
[ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
[ 7.574] Build Date: 01 July 2013 10:48:42AM
[ 7.574]
[ 7.574] Current version of pixman: 0.30.0
[ 7.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
[ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.575] (==) No Layout section. Using the first Screen section.
[ 7.575] (==) No screen section available. Using defaults.
[ 7.575] (**) |-->Screen "Default Screen Section" (0)
[ 7.575] (**) | |-->Monitor "<default monitor>"
[ 7.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.575] (==) Automatically adding devices
[ 7.575] (==) Automatically enabling devices
[ 7.575] (==) Automatically adding GPU devices
[ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.578] Entry deleted from font path.
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.578] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.578] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.578] (II) Loader magic: 0x7fdc20
[ 7.578] (II) Module ABI versions:
[ 7.578] X.Org ANSI C Emulation: 0.4
[ 7.578] X.Org Video Driver: 14.1
[ 7.578] X.Org XInput driver : 19.1
[ 7.578] X.Org Server Extension : 7.0
[ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.580] Initializing built-in extension Generic Event Extension
[ 7.580] Initializing built-in extension SHAPE
[ 7.580] Initializing built-in extension MIT-SHM
[ 7.580] Initializing built-in extension XInputExtension
[ 7.580] Initializing built-in extension XTEST
[ 7.580] Initializing built-in extension BIG-REQUESTS
[ 7.580] Initializing built-in extension SYNC
[ 7.580] Initializing built-in extension XKEYBOARD
[ 7.580] Initializing built-in extension XC-MISC
[ 7.580] Initializing built-in extension SECURITY
[ 7.580] Initializing built-in extension XINERAMA
[ 7.580] Initializing built-in extension XFIXES
[ 7.580] Initializing built-in extension RENDER
[ 7.581] Initializing built-in extension RANDR
[ 7.581] Initializing built-in extension COMPOSITE
[ 7.581] Initializing built-in extension DAMAGE
[ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.581] Initializing built-in extension DOUBLE-BUFFER
[ 7.581] Initializing built-in extension RECORD
[ 7.581] Initializing built-in extension DPMS
[ 7.581] Initializing built-in extension X-Resource
[ 7.581] Initializing built-in extension XVideo
[ 7.581] Initializing built-in extension XVideo-MotionCompensation
[ 7.582] Initializing built-in extension XFree86-VidModeExtension
[ 7.583] Initializing built-in extension XFree86-DGA
[ 7.583] Initializing built-in extension XFree86-DRI
[ 7.584] Initializing built-in extension DRI2
[ 7.584] (II) LoadModule: "glx"
[ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.586] (II) Module glx: vendor="X.Org Foundation"
[ 7.586] compiled for 1.14.2, module version = 1.0.0
[ 7.586] ABI class: X.Org Server Extension, version 7.0
[ 7.586] (==) AIGLX enabled
[ 7.587] Loading extension GLX
[ 7.587] (==) Matched intel as autoconfigured driver 0
[ 7.587] (==) Matched nouveau as autoconfigured driver 1
[ 7.587] (==) Matched nvidia as autoconfigured driver 2
[ 7.587] (==) Matched nv as autoconfigured driver 3
[ 7.587] (==) Matched intel as autoconfigured driver 4
[ 7.587] (==) Matched vesa as autoconfigured driver 5
[ 7.587] (==) Matched modesetting as autoconfigured driver 6
[ 7.587] (==) Matched fbdev as autoconfigured driver 7
[ 7.587] (==) Assigned the driver to the xf86ConfigLayout
[ 7.587] (II) LoadModule: "intel"
[ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.592] (II) Module intel: vendor="X.Org Foundation"
[ 7.592] compiled for 1.14.2, module version = 2.21.12
[ 7.592] Module class: X.Org Video Driver
[ 7.592] ABI class: X.Org Video Driver, version 14.1
[ 7.592] (II) LoadModule: "nouveau"
[ 7.592] (WW) Warning, couldn't open module nouveau
[ 7.592] (II) UnloadModule: "nouveau"
[ 7.592] (II) Unloading nouveau
[ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nvidia"
[ 7.592] (WW) Warning, couldn't open module nvidia
[ 7.592] (II) UnloadModule: "nvidia"
[ 7.592] (II) Unloading nvidia
[ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nv"
[ 7.592] (WW) Warning, couldn't open module nv
[ 7.592] (II) UnloadModule: "nv"
[ 7.592] (II) Unloading nv
[ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.592] (II) LoadModule: "vesa"
[ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.593] (II) Module vesa: vendor="X.Org Foundation"
[ 7.593] compiled for 1.14.0, module version = 2.3.2
[ 7.593] Module class: X.Org Video Driver
[ 7.593] ABI class: X.Org Video Driver, version 14.1
[ 7.593] (II) LoadModule: "modesetting"
[ 7.593] (WW) Warning, couldn't open module modesetting
[ 7.593] (II) UnloadModule: "modesetting"
[ 7.593] (II) Unloading modesetting
[ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.593] (II) LoadModule: "fbdev"
[ 7.593] (WW) Warning, couldn't open module fbdev
[ 7.593] (II) UnloadModule: "fbdev"
[ 7.593] (II) Unloading fbdev
[ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 7.594] (II) VESA: driver for VESA chipsets: vesa
[ 7.594] (++) using VT number 1
[ 7.594] (WW) Falling back to old probe method for vesa
[ 7.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.594] (==) intel(0): RGB weight 888
[ 7.594] (==) intel(0): Default visual is TrueColor
[ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.594] (**) intel(0): Relaxed fencing enabled
[ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.594] (**) intel(0): Triple buffering? enabled
[ 7.594] (**) intel(0): Framebuffer tiled
[ 7.594] (**) intel(0): Pixmaps tiled
[ 7.594] (**) intel(0): 3D buffers tiled
[ 7.594] (**) intel(0): SwapBuffers wait enabled
[ 7.594] (==) intel(0): video overlay key set to 0x101fe
[ 7.594] (II) intel(0): Output eDP1 has no monitor section
[ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 7.596] (II) intel(0): Output VGA1 has no monitor section
[ 7.596] (II) intel(0): EDID for output eDP1
[ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 7.596] (II) intel(0): Year: 2012 Week: 0
[ 7.596] (II) intel(0): EDID Version: 1.4
[ 7.596] (II) intel(0): Digital Display Input
[ 7.596] (II) intel(0): 6 bits per channel
[ 7.596] (II) intel(0): Digital interface is DisplayPort
[ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 7.596] (II) intel(0): Gamma: 2.20
[ 7.596] (II) intel(0): No DPMS capabilities specified
[ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.596] (II) intel(0): First detailed timing is preferred mode
[ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 7.596] (II) intel(0): Manufacturer's mask: 0
[ 7.596] (II) intel(0): Supported detailed timing:
[ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 7.596] (II) intel(0): LG Display
[ 7.596] (II) intel(0): LP156WF4-SPB1
[ 7.596] (II) intel(0): EDID (in hex):
[ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
[ 7.596] (II) intel(0): 1c505400000001010101010101010101
[ 7.596] (II) intel(0): 010101010101e83580a8703816402024
[ 7.596] (II) intel(0): 550059c2100000180000000000000000
[ 7.596] (II) intel(0): 00000000000000000000000000fe004c
[ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
[ 7.596] (II) intel(0): 004c503135365746342d535042310069
[ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7.597] (II) intel(0): Printing probed modes for output eDP1
[ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.598] (II) intel(0): EDID for output VGA1
[ 7.598] (II) intel(0): Output eDP1 connected
[ 7.598] (II) intel(0): Output VGA1 disconnected
[ 7.598] (II) intel(0): Using exact sizes for initial modes
[ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.598] (==) intel(0): DPI set to (96, 96)
[ 7.598] (II) Loading sub module "fb"
[ 7.598] (II) LoadModule: "fb"
[ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.599] (II) Module fb: vendor="X.Org Foundation"
[ 7.599] compiled for 1.14.2, module version = 1.0.0
[ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.599] (II) Loading sub module "dri2"
[ 7.599] (II) LoadModule: "dri2"
[ 7.599] (II) Module "dri2" already built-in
[ 7.599] (II) UnloadModule: "vesa"
[ 7.599] (II) Unloading vesa
[ 7.599] (==) Depth 24 pixmap format is 32 bpp
[ 7.599] (II) intel(0): [DRI2] Setup complete
[ 7.599] (II) intel(0): [DRI2] DRI driver: i965
[ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 7.599] (II) UXA(0): Driver registered support for the following operations:
[ 7.599] (II) solid
[ 7.599] (II) copy
[ 7.599] (II) composite (RENDER acceleration)
[ 7.599] (II) put_image
[ 7.599] (II) get_image
[ 7.599] (==) intel(0): Backing store disabled
[ 7.599] (==) intel(0): Silken mouse enabled
[ 7.600] (II) intel(0): Initializing HW Cursor
[ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.600] (==) intel(0): DPMS enabled
[ 7.600] (==) intel(0): Intel XvMC decoder enabled
[ 7.600] (II) intel(0): Set up textured video
[ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
[ 7.600] (==) intel(0): hotplug detection: "enabled"
[ 7.613] (--) RandR disabled
[ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.634] (II) AIGLX: Loaded and initialized i965
[ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.669] (II) LoadModule: "evdev"
[ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.670] (II) Module evdev: vendor="X.Org Foundation"
[ 7.670] compiled for 1.14.2, module version = 2.8.1
[ 7.670] Module class: X.Org XInput Driver
[ 7.670] ABI class: X.Org XInput driver, version 19.1
[ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.670] (**) Video Bus: always reports core events
[ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.670] (--) evdev: Video Bus: Found keys
[ 7.670] (II) evdev: Video Bus: Configuring as keyboard
[ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7.670] (**) Option "xkb_rules" "evdev"
[ 7.670] (**) Option "xkb_model" "pc104"
[ 7.670] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.684] (**) Video Bus: always reports core events
[ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.684] (--) evdev: Video Bus: Found keys
[ 7.684] (II) evdev: Video Bus: Configuring as keyboard
[ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
[ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.684] (**) Option "xkb_rules" "evdev"
[ 7.684] (**) Option "xkb_model" "pc104"
[ 7.684] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Power Button'
[ 7.685] (**) Power Button: always reports core events
[ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.685] (--) evdev: Power Button: Found keys
[ 7.685] (II) evdev: Power Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 7.685] (II) No input driver specified, ignoring this device.
[ 7.685] (II) This device may have been added with another device file.
[ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.685] (**) Sleep Button: always reports core events
[ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.685] (--) evdev: Sleep Button: Found keys
[ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
[ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
[ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.686] (II) No input driver specified, ignoring this device.
[ 7.686] (II) This device may have been added with another device file.
[ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7.687] (II) LoadModule: "synaptics"
[ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.687] compiled for 1.14.1, module version = 1.7.1
[ 7.687] Module class: X.Org XInput Driver
[ 7.687] ABI class: X.Org XInput driver, version 19.1
[ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.687] (**) Option "Device" "/dev/input/event7"
[ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7.810] (**) Option "TapButton1" "1"
[ 7.810] (**) Option "TapButton2" "2"
[ 7.810] (**) Option "TapButton3" "3"
[ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
[ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 7.853] (II) No input driver specified, ignoring this device.
[ 7.853] (II) This device may have been added with another device file.
Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
In case it's of any use, this is my # uname -a
Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
Any ideas or advice to point me in the right direction would be very much appreciated.
Thanks in advance.
Last edited by contiver (2013-08-16 20:25:34)

I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
but it didn't work for me.
Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
BUG: unable to handle kernel paging request at ffffc90014ce8000
IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
Call Trace:
[<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
[<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
[<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
[<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
[<ffffffff813200bd>] redraw_screen+0x17d/0x240
[<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
[<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
[<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
[<ffffffff8130b407>] tty_ioctl+0x277/0xb90
[<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
[<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
[<ffffffff8117328e>] ? ____fput+0xe/0x10
[<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
[<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
[<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP <ffff8800797efaa8>
CR2: ffffc90014ce8000
---[ end trace aff6cb5ad5097aef ]---

MacBook no longer connects wirelessly to internet after using ethernet

So: here at home I have an airport extreme and a time capsule. The airport extreme connects to the cable modem, and the time capsule extends the wireless network created by the extreme. I was trying to do an initial time machine backup from the MacBook, so I plugged it in with an ethernet cable to speed things up. After using the cable, the MacBook will simply not connect to the internet if I connect wirelessly to the network. When wireless accessing the network, I can see the time capsule's shared drive, etc, but I can't connect through to the wider internet.
Any suggestions?

have you tried doing a power cycle on your modem and airport?

My internet freezes occasionally after using iphoto

Similar Messages

Maybe you are looking for