My internet hasn't been working with out wi fi. It's been like this since last week!!

oh boy!! No facebook! No navigator! No nothing! I saw my phone wasn't working the right way when I had step out of my house and notice I couldn't update my status on facebook. So I thought maybe reseting it would help but ehh no help. So when I got home I notice it was working great. So I thought the phone was fixed. But I guess I was wrong when I had step outside again. So then I thought my phone was just acting slow, because earlier that day I had texted my sister and she ended up getting my message an hour late. So I took a real good look at my phone and notice that it had said that I had no wi fi (which is weird because I always had wi fi EVERYWHERE I went) and then I notice that where it's normally my carriers name(sprint) it had been replaced with "offline". I really didn't know what that ment so I decided to call a friend who has a palm pre as well but as I tried calling him, my call was not going through. So basically I could only use my phone when I'm in my house, which are the moments when I least need a phone. I'm just wondering is there any form of solution? Or do I need a new phone?
Post relates to: Pre p100eww (Sprint)

If your device is in offline mode you can try entering airplane mode and then go back to normal to see if this will get it out of offline mode. If this does not work you can try a restart from Device Info, Reset Options, Restart, then go in and out of airplane mode again. IF this does not work then you can try an erase app and data from the same Device Info (this will remove all data on your device) and then try going in and out of airplane mode. If none of theses options work then you can try Web OS Doctor to restore your software on the device. The last option would be to get a replacement device.
Remember when Wi-Fi is on and connected this will disable you cellular data connection. Be sure this is not what is happening. If you have data at home with Wi-Fi, and then leave you home and do not have Wi-Fi you need to make sure your device is switching back to EV on your status bar to have a data connection.

Similar Messages

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT4623 help me to troubleshoot my ipad2 there is software update and i updated mine from 5.0 to 6 version but now the screen shows only usb cord arrow up sign then itunes and music logo. it has been like this since last night.what i will do?

help me to troubleshoot my ipad2 there is software update and i updated mine from 5.0 to 6 version but now the screen shows only usb cord arrow up sign then itunes and music logo. it has been like this since last night.what i will do?i even tried turning it off but it doesnt work too. i only see the apple logo and it comes back to cord image and itune then after 30 secs the screen turns black. help me please.

The iPad is telling you to connect your iPad to iTunes on your computer so do it. You may have to restore the device.
Restoring iOS Software.
http://support.apple.com/kb/ht1414
You may need this as well.
Unable to update or restore iPad.
http://support.apple.com/kb/ht4097

I've been working with documents in pages and recently downloaded word for mac. i open the pages documents and they appear to be corrupt. at least, a lot of the font is now in weird boxed pictures. what do i do?

I've been working with documents in Pages and recently downloaded Word for Mac. Upon opening Pages documents with Pages, the documents appear corrupt. Much of the font has been replaced with boxed little pictures - yet they are identified as times new roman. What do I do?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

Why my i pod is not working with out charger

hey, my i pod is not working with out the charger plugged into it?!

What do you mean? Please be more precised so I may help you father. If it is plugged in, but won't open. You must wait at least 5 minutes before using it again. Ipod need a certain amount of power for it to start. Or even when its plugged in but wont charge, make sure it is connected very well to the computer or the power outlet to the Ipod. Lastly, if you are charging at another place, for example in your friend's house. The voltage power may be different from where you mostly charge it from. But if it isn't plugged. Maybe it need to be charged?
Hope this helps.
~pnoypryde

HT5316 I've been working with Mainstage 2.1.3 and have experienced concerts crashing immediately after loading. I'm not installing Mainstage 2.2.2 to see if that helps alleviate the issue. My question is: should I uninstall Mainstage 2.1.3 now?

Hi all,
I've been working with Mainstage 2.1.3 and have experienced concerts crashing immediately after loading. In an attempt to solve crash issue, I've installed Mainstage 2.2.2 to see if that helps alleviate the issue. My question is: should I uninstall Mainstage 2.1.3 now in order to save memory?
thanks,
korriefromca

Hi
korriefromca wrote:
My question is: should I uninstall Mainstage 2.1.3 now in order to save memory?
You would only save about 500MB by deleting MS 2.1.3. You may find it useful to keep the application, or perhaps to make a zip and then delete the original
CCT

I have been working with adobe (case

I have been working with adobe (case #0213942809) to provide the information I need to get the serial number for my purchase in 2013 of Photoshop11. I now have the information but I do not know where to send it. Can you give me that information?

Thanks for your suggestions. I only found one patch to apply:
Adobe RoboHelp 7.0.1 - English, French, German, and Japanese
REgarding item 40 on your Snippets, when I atempt to open RoboHelp for Word, I get an error mesage that reads RoboHElp explorer is unable to start Word. I have uninstalled RoboHelp X5 and the upgrade to RoboHelp 7 and reinstalled both. Also had IT provide me with a new profile. Unfortunately, these steps did not resolve the issue of being unable to open xpj files.
Yes, Clownfish project and the project I am attempting to open are on my local drive not on a network drive.
When trying to open the hhp file, I get the following error message:
error message when uninstalling and reinstalling and trying to create a new project:
error when deleted xpj and cpd files and attempting to edit the hhp file

Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.

The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

Sharepoint 2013 list view quick edit does not work with out remote API permissions

sharepoint 2013 list view quick edit does not work with out remote API permissions.
When I give Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

I am currently studying abroad in Italy and my imessage has been working with wifi up until now. I just wen to PAris for the weekend and when I came back it says that Imessage is waiting for activation. How do I fix this? Thanks!

I am currently studying abroad in Italy and my imessage has been working with wifi up until now. I just wen to PAris for the weekend and when I came back it says that Imessage is waiting for activation. How do I fix this? Thanks!

If iMessage has become deactivated on your iPhone, which, apparently it has, the phone will need to send an SMS to activate it again. Therefore, you'll need a cellular connection.

Condition has been found with out contition record.

Hi,
message 207(VE) is coming when in release invoice.
Condition has been found with out contition record(207VE)
please help.
Thanks,

Dear,
In pricing procedure for billing type there is one condition whose condition record has not been found so check that condition in transaction VK11 and check you have maintained any record. If not then maintain one.
System must tell you the condition type and if it does not then go to analyses in item condition screen and find one.
Regards,
Chintan Joshi

I have just downloaded Firefox 4 and my autofill on the google toolbar is not working for any webpages it previously worked with. Is there a way to fix this? Thanks

Question
I have just downloaded Firefox 4 and my autofill on the google toolbar is not working for any webpages it previously worked with. Is there a way to fix this? Thanks

Crap. That's what I was afraid of...Well, since I'm away from home and not near my pc, it sounds like I'm out of luck. The problem is that I need my phone to be at least functional for making and receiving calls. There's an apple store nearby. Perhaps I can go there and have them restore it and at least I'll be able to make and receive calls until I get home and restore from my backup. Does that sound feasible, or am I missing something?
P.s. I tried to click "correct answer" and accidentally hit "helpful". Sorry about that...

I converted some songs in iTunes to work with an eMusic device. I'd like to delete them, but I'm not sure which of the duplicated songs to delete. Some titles are black and some are gray.

I converted some songs in iTunes to work with an eMusic device. I'd like to delete them, but I'm not sure which of the duplicated songs to delete. Some titles are black and some are gray.

let's just doublecheck some things quickly. do any of the affected songs play in itunes at the moment? if so, when you play them, do they ask to be authorised?
if so, does the authorisation go through successfully, or do you get an error message? (if you get an error message, let us know what it says. include error message numbers if you're getting any.)
if the authorisation seems to go through successfully, with the authorised songs sync to the ipod?

I have a 4th gen iPad and the type face on the keyboard has been replaced with small squares. How do I fix this?

I have a 4th gen iPad and the type face on the keyboard has been replaced with small squares. How do I fix this?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

My internet hasn't been working with out wi fi. It's been like this since last week!!

Similar Messages

Maybe you are looking for