My Internet keeps freezing, once turn the ipad2 off and on again it okay for a while. Any ideas?
My Internet keeps freezing, once turn the ipad2 off and on again it okay for a while. Any ideas?
If you are using Safari then try clearing its cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
I have tried to download 2 movies onto my iPad but I keep getting a download error message. What do I do now? I have already tried turning the iPad off and on again…still nothing.
Try closing iTunes and reset your iPad. After the iPad starts up, try the download again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the iTunes app then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?
Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.
-
HP LaserJet P1102w will only print wirelessly if I turn the printer off and on again
I have 2 Laserjet P1102w that work fine printing through USB. However, I was hoping this printer could become the standard wireless printer for individual users in the office. I have setup 2 different printers wirelessly with their own static, reserved IP addresses and they are connected to our wireless access point (WPA). We have all laptops that are connected to the network via the same access point as well as through hard wired ethernet. In all cases, they are on the same subnet.
Once I connect any laptop to one of these printers wirelessly through either the "smart install" client or the latest regular installation exe off of HP's site, it will print fine initially. However, whenever I undock the laptop or even just wait a few hours, the connection will be lost and I cannot print. The queue just says "Error - Printing" when I print sometihng. No errors in the logs. The connection will come back if I turn off the printer and turn it back on. This is very annoying and will probably not be acceptable to the users.
So I wanted to do more testing and connected both printers to my laptop wirelessly and made sure they could print successfully. I opened 2 command windows and ran a ping -t on each IP address to see at what point the connection dies. The ping will reply until I undock and go from hard wired / wireless to just wireless.. then it will say "Destination unreachable" and I can't even access the web interface. Even if I redock to hard wired / wireless, I still can't print unless I restart the printer.
This happens on 2 different laptops with 2 different p1102w printers. Any clue as to what's going on here and how I can fix it?
Edit:
If I have both wireless and nic enabled, once I undock the laptop, the ping -t changes from replying to the ip of the printer, to replying to the address of the wireless adapter with "Destination host unreachable".
For example:
IP of printer: 192.168.2.95
IP of wireless adapter on laptop: 192.168.2.25
ping 192.168.5.95
Reply from 192.168.2.95
Reply from 192.168.2.95
*undock"
Reply from 192.168.2.25 Destination Host Unreachable
Reply from 192.168.2.25 Destination Host Unreachable
This does not happen if I disabled the nic and run only off the wireless card. So the workarounds are to either turn the printer off and back on if I undock every time, or disabled the nic.
At this point, I just want to understand why it is like this?Mowaffaq, you may want to determine whether you are making those changes in the master printing preferences (versus the adjusting the session printing preferences from within your application).
Click "Start", click "Printers and Faxes" (or "Devices and Printers"), right-click your printer, and select "Printing Preferences". On the "Paper/Quality" tab, you should be able to specify A4 as your default paper for all future print jobs.
Hope that helps. -
Every time i need to print something, I've to turn the print off and on again, any solutions?
Ok, I have a HP D110, installed wirelessly on a laptop mac OS X, everything works well, besides every time I need to print something, I've to turn the printer off and on to start print, like on a gap of 5 min. between jobs I have to do it, when it suppose to wake up as soon as you send a job to print I guess. I don't wanna have to go where the printer is all the time I need to print some, otherwise I'd use the cable connection, if anyone have solutions or experience the same prob, I'm looking for answers to solve this.
Thank you.
Alfred!Hi Alfred,
Please check for any available firmware update:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02836005&cc=us&dlc=en&lc=en&product=4023246&tmp...
Make sure to install the latest firmware and check for any change.
If the same behavior persist, please let me know what router you are using in order to better understand any possible cause.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Sometimes, when the device is locked, I can't unlock, I can't slide my finger horizontally, just vertically. When I turn it off and on again, it backs to normality.
It appears to be "frozen", but I can turn it off.
I thought that it may be happening by low free space, but there's 'bout 3.4 GB free.
I've realized that when I use Siri and voice commands it happens more.
Somebody can help me?
Thx a lotBasic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem. -
Intermittently, when I try to enter the internet through Safari on my Imac, it freezes up so that the loading line only goes 1/3 way across and then stops. If I shut down the computer and then restart, it usually loads fine. I have had my internet provider check eveything form their end and it is fine. I suspect that I have a software conflict. My provider and others have said that I should use FireFox because Safari is not that stable. I am running OSX Maverick on my system. This was a recent download. Is anyone else having this problem and have you any ideas how I can correct it.
If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately, leaving the Terminal window empty. If that doesn't happen, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type only your login password when prompted. When typing it, you won't see what you're typing. Make sure caps lock is off.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary. -
i am looking for som answers and am sure other iphone 4s users may have the same problem. this has only started to happen to me since i updated to ios7..
Rome,
I would try everything that "Diesel" has suggested !!!
I had the same problem after updating to iOS 5.1. I was never able to fix it. I did however find a work around and that was to delete the offending Wi-Fi configuration and then under "Other" manually add back my Wi-Fi connection. This solved the auto re-connect problem. I don't think this is a fix but a pretty darn good work-around.
I talked to Apple about this problem while arranging for a replacement phone (for another problem) and the Technician seemed to be aware of this quirk and suggested that my fix was about the best I could expect.
HOWEVER - when I received my replacement phone not only did the problem that I exchanged the phone for now function correctly but the "Auto-reconnect" of the Wi-Fi worked as expected and as it did prior to the iOS 5.1 update.
Go-Figure !!! -
Just tried everything I can think of pinching to make it smaller and other gestures etc. none work. The phone is still usable but you have scroll around to find what you want on the desktop.
Try checking Settings > General > Accessibility > Zoom and turn it OFF.
-
my iphone 4 home button is not working anymore. I have to turn the phone off and on again to access an app. When turning it on it immediately goes to voice control. I cannot get out of this. I have checked and updated the software and finally reset the phone. All this has left me with the same problem. Any ideas???
Voice Over Fix
Settings > General > Accessibility > Voice Over > Off
Or,
Press the Home Button 3 Times
Now...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I keep getting an error 05 code on my t31 and turning the camera off and back on does not work.
I keep getting an error code 05 when I try to use certain modes on my Rebel T3i. It seems as though my auto flash is stuck. Is this a common complaint....and if so.....what is the answer to deal with this issue. I have followed the instructions of turning the camera off and back on....to no avail. HELP!!
Hi Hydra171,
The Error 5 error code indicates a malfunction in the popup flash mechanism.
If this is not cleared by turning the camera off, then on, your camera will require service to correct this issue.
You may set up the repair for your camera here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done. it has been this way for the last 2/3 days now and i have uninstalled and reinstalled it but it doesnt work
Hello there, bobbiefromIRL.
The following Knowledge Base article goes over some great steps for troubleshooting your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
-
Today, my iPad2 wouldn't delete mail. Then the screen turned black. I turned the iPad2 off then on. Got black screen. Tried backing up to iTunes. Got the message "iTunes cannot connect to this iPhone because unknown error occurred (OxE8000065). Help, please.
Did you try restarting it by holding down the hold and lock button at the same time until you get the apple logo? If you already tried that then you should try putting it in DFU mode and doing a restore by following these instructions- http://www.iclarified.com/entry/index.php?enid=1034
-
My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?
Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article.
Maybe you are looking for
-
Connecting to a samsung sf-565p printer via windows pc
Hey guys, I can't seem to set up my printer though os x, is there any walkthrough step by step instructions anywhere that I can use, when I try to select the printer model samsung isn't in the list. Thanks in advance.
-
Standard Forecast report for Sales
Hi, I wanted to know if there is any standard Sales forecast report available ? I tried using tcode MC95 field Planning type as Z961 but im not getting materialwise forecast.Help if anyone is familiar with this. Regards Deepa
-
Works on local 10g Express but not 9i. : Got minus one from a read call
Using a desktop I have a 3rd party tool that needs to access an Oracle 9i DB. The tool does not connect to the db at all. I also have Toad installed on the desktop and Toad can connect fine. The error message I get with the 3rd party tool is: "Got mi
-
Anyone else had this problem? What should I do? Thanks
-
External HDD is write-only - inability to reformat
Hello, I've got a MacBook Pro and an old PowerBook G4, and I"m having similar troubles with each computer: I have a couple of bus-powered firewire drives. I had been using them for archives on an old computer, and now I want to re-format the drives f