MY IOS does not support EKU Server-Auth/Client-Auth

Hello,
I have a cisco router with Software (C3725-ADVENTERPRISEK9-M), Version 12.4(15)T8. im trying to set it up as my CA Server where I need to enroll my AnyConnect clients.
But while I trying to configure my crypto pki server command, I do not see EKU Server-Auth or EKU Client-Auth feature
can any one tell why it does not have this feature ??

it was added into 12.2T. but for me it does not have this feature available . any ideas ?

Similar Messages

Transact-SQL debugger not working in SQL Server 2008: "...debugger does not support SQL Server 2005 or earlier..."

I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?

Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang

Biztalk Server 2013 does not support Windows Server 2012 R2

is there any document or statement from MS that States "Biztalk Server 2013 does not support Windows Server 2012 R2"

Hi Mohit,
I haven't come across any document, but there is a blog from Microsoft about it.
http://blogs.msdn.com/b/biztalknotes/archive/2013/10/29/biztalk-2013-compatibility-with-latest-platforms-of-microsoft.aspx
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

CR 2008 SP3 FP 3.4 does not provide SQL Server Native Client 10.0

One of my clients is running Crystal Reports 2008 SP3 Fix Pack 3.4 on a Windows 2008 R2 server and is running MS SQL 2008 (not R2) on a separate Windows 2008 R2 server. This was installed to correct printer issues. As expected, they started getting errors on some that use dates in the record selection formula.
I informed them that we needed to change the data connection driver from "Microsoft OLE DB Provider for SQL Server' to "SQL Server Native Client 10.0". When they go in to create a new data connection the OLE DB (ADO) Provider list does not list "SQL Server Native Client 10.0" as an option.
As I understand it from another thread on this site, this OLE DB client version is required for CR 2008 to properly interface with SQL 2008 and that it should be available after installing FP 3.2 or 3.3. I made sure that they installed all fix packs in their released order.
Can anyone shed some light on this for me?

Hello,
Actually there is:
{tblCaseData.CloseCodeID} = 2
and {tblCaseData.CaseSplitTrusteeCode} 'A'
and {%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} )
and {%sql_CountACH} = 0
and {%sql_CountNameIDParties} = 0
and {%sql_CourtWageDir} = 0
{%sql_Adj341Date} >= {?pf_BeginDate} and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ) is the result of NOT statement.
Try something like this:
{tblCaseData.CloseCodeID} = 2
and {tblCaseData.CaseSplitTrusteeCode} 'A'
and ({%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ))
and {%sql_CountACH} = 0
and {%sql_CountNameIDParties} = 0
and {%sql_CourtWageDir} = 0
I added AND/OR/NOT etc. logic to:
and ({%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ))
You'll have to figure out what the correct bracketing should be for your data and what you want to get out of it. Possibly moving the date part to the end of the selection formula will "fix" this.
Thank you
Don

"Desktop does not support requested protocol" - vmware client on OS X 10.8

Down loaded vmware client 1.7 on myiMac running Mountain Lion. I get the following issue - "Desktop does not support requested protocol"
Can anyone advise or guide me?

Thank you, understood, and I will not uninstall anything, but do I install this current update 3.8.2. v1.1?
My current system does not match what is needed for it according to the information on this page ...
http://support.apple.com/en-us/HT201068
The system requirements needed for the update are OS X 10.9 or later, and my system is OS X 10.8.5.

Ios email app does not support user name with multiple "."

I have two gmail email addresses and have both set up on my ipad, however the ios email app cannot connect to the gmail server for one of the two accounts. Account settings are strictly identical and connection from the Gmail app works fine. The only difference I could find between the two accounts is that the one with connection issues uses a format of "[email protected]" whereas the one that works fine is "[email protected]". Is it a known bug that the ios app does not support the first format?
Thanks

Yes, double dots/periods are not allowed.

Adobe Creative Cloud does not support Bootcamp by Apple IOS operating system, but does work with boot camp Win 8.1 why"

Adobe Creative Cloud does not support APPLE latest IOS operating system, but does allow Windows 8.1 to be accepted. This seems a shame to me, as
Apple IOS is the leader in graphics, photography. The advertising states it is usable under both APPLE IOS and Microsoft 8.1 windows operating systems. Adobe Support Chat Sooraj tells me on 02/19/2015 that i must buy two computers to have it operate on both operating systems. Adobe will not support apple's Boot CAMP allowing both operating systems.
i love the apple product and love the ADOBE Photoshop CC, but it simply does now work with an apple keyboard and a WiN operating system. .[email protected] Adobe Creative Cloud

In Thehatters defence, this was initially posted in the MacbookPro forum and then moved to Boot Camp,
If you have any joy solving your trackpad device driver issue, feel free to post here (there might be a similar fix for my wireless adapter device)
Thanks

Your Client Does not Support Opening this list with Windows Explorer on Windows Server 2012 R2

I am trying to open a document library in Internet Explorer 11 on a Windows 2012 R2 server and I am receiving Your Client Does not Support Opening this list with Windows Explorer

Hi,
According to your post, my understanding is that you wanted to open a document library with the Internet Explorer 11 on a Windows 2012 R2 server. But you received the following error message: Your client
does not support opening this list with Windows Explorer.
There can be multiple reasons for it.
So, I recommend you can check with the following steps:
Go to the “Server Manager” of “Administrative Tools” > Enable the “Desktop Experience” feature in your environment.
Go to the “Services” of “Administrative Tools” >
Ensure the “WebClient” service is started.
Ensure that your computer has supported Web browser.
Ensure that Internet Explorer is configured correctly to add
https://*.sharepoint.com to Local intranet site in the “Security Tab” of “Internet Options”.
Ensure that
you have applied the latest updates on the system.
For more information, you can refer to the following articles:
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
http://mcgeeky.blogspot.com/2010/02/your-client-does-not-support-opening.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

I cannot copy and paste details from my bank statement into a word document, without the formatting changing.I have a message in my Error console which reads: server does not support RFC 5746, see CVE-2009-3555

Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.

Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

"SQL Server 2008 Reporting Services does not support map report items"

Hi,
I am trying some new feature that are introduced in SQL Server 2008 R2 version. While I try to use "Map" control within it, it threw the following error:-
"Error 1 The map, Map1, was removed from the report. SQL Server 2008 Reporting Services does not support map report items. "
-Also, similar kind of error I am getting for "Indicator" control.

Hi Tej,
I think you get this error message when you are deploying a report to report server using BIDS, correct? If not, please provide more details on your scenario :-)
If I guessed correctly, then this message is a result of trying to deploy a map report (a SSRS 2008 R2 feature) to a non-R2 2008 report server. When deploying a report of RDL2010 format to a non-R2 report server, BIDS will downgrade the file to RDL2008 format, so that the non-R2 report server can process it. Any report elements using features not supported in RDL2008 will be dropped during this downgrade process.
BIDS gets the server version from a report project property called TargetServerVersion:
http://technet.microsoft.com/en-us/library/ee635898(SQL.105).aspx
If your report server is indeed the 2008 R2 version, then the TargetServerVersion property should be set to "SQL Server 2008 R2 Reporting Services." The project property page also has a "Auto Detect..." option if you are uncertain about the version of your report server.
Hope this helps!
Cheers,
LawrenceThis posting is provided "AS IS" with no warranties, and confers no rights.

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

My phone 4s does not support reliance gsm server in india pl help

my i phone 4s does not support reliance gsm server in india pl help

There is nothing we can do for you here. This is a user to user technical support forum. If you purchased a phone that does not work with your carrier, then you won't be able to use it. We can't help you.
Sorry,
GB

Server does not support remote panels

I am developing an online laboratory setup and hence am using a client server model..the client VI being accessed by remote users online. I have done all the necessary steps using Web Publishing tool and the configuration set up. I have also tested the VI previously online. Suddenly now when I hit the URL for the VI the panel does not load...it says Server does not support remote panels. What could be the problem?

see answer given second posting of question.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

Server does not support setting more than 5 shared access policy identifiers on a single container

Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
                inputAsset = (from a in _context.Assets
                              where a.Id == AssetId
                              select a).FirstOrDefault();
                policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                assetFile.Upload(singleFilePath);
                locator.Delete();
                MediaElement media = new MediaElement();
                media.AssetId = inputAsset.Id;
                media.Title = Path.GetFileName(singleFilePath);
                var result = Save(media, singleFilePath);
                return inputAsset;
            else
                inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                 policy = _context.AccessPolicies.Create(
                                    inputAsset.Name,
                                    TimeSpan.FromDays(30),
                                    AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
                 var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                 var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                 assetFile.Upload(singleFilePath);
                 locator.Delete();
                 policy.Delete();
                 MediaElement media = new MediaElement();
                 media.AssetId = inputAsset.Id;
                 media.Title = Path.GetFileName(singleFilePath);
                 var result = Save(media, singleFilePath);
                 return inputAsset;

Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures   please check if it helps.
Regards,
Shirisha Paderu.

Server does not support: RFC 567456 see CVE-2009-3555

I am running Win 7, with a Netgear wireless dongle (Wn111v2) via a BT HomeHub. Both with latest drivers. Apart from Auto updates from MS & Firefox, no other software newly loaded.
Recently, Netgear starts with 113 Mbps, then rapidly drops to 1 Mbps. Firefox Error console states: "Server does not support: RFC 567456 see CVE-2009-3555"
All assistance appreciated. Dan

That message is meant for webmasters to make them aware that they need to fix their servers.
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See also https://wiki.mozilla.org/Security:Renegotiation
'''Update Adobe Reader (Adobe PDF Plug-In)'''
*Check your version: http://www.mozilla.com/en-US/plugincheck/
**'''Note: plugin check does ont have information to check all versions of all plugins'''
*'''Another new version of Adobe Reader is schedule for release during the week beginning 2010-08-16 to correct security issues.'''
Updating Adobe Reader:
#From within your existing Adobe Reader:
#*Open the Adobe Reader program from your Programs list
#*Click Help > Check for Updates
#Download complete installer:
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#*On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#*If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#*Click "Save to File"; save to your desktop
#*After download completes, close Firefox
#*Click the installer you just downloaded and allow the install to continue
#**Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#*See: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#After the installation, start Firefox and check your version again.

MY IOS does not support EKU Server-Auth/Client-Auth

Similar Messages

Maybe you are looking for