My IP is blacklisted - Emails blocked - Whitelist request denied
I've submitted a request to get my IP whitelisted, but Verizon keeps denying it over and over. I never send any spam and I have a dedicated IP (it's not dynamically generated).
Verizon, why won't you whitelist {edited for privacy}? This is making me crazy!
Hi dylansteinlac14,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.
Similar Messages
-
Our emails blocked by Microsoft FBLW15 over 1 month now, no contact to Microsoft
Hi,
We are UK based company and all our emails have been blocked by Microsoft for over 1 month now.
We are receiving back:
Message could not be delivered to some recipients.
The following recipient(s) could not be reached:
Recipient: xxx
Reason: Remote SMTP Server Returned: Service unavailable; Client host [xxx] blocked using FBLW15; To request removal from this list please forward this message to delist... etc
When we have sent delist request, someone from Microsoft sent us back another email, asking more questions.
Hello ,
Thank you for contacting Microsoft Online Services Technical Support. This email is in reference to ticket number 1276221567, which was opened in regards to your delisting request for xxx.
We see that the IP address in question has been submitted for delisting within the last 30 days. In order to process this new request please provide us with the following information:
What caused the spam-like activity from the IP address?
What steps have been taken to prevent the spam-like activity from occurring again?
Please respond to this email with your answers and any questions or concerns you may have.
Thank you again for contacting Microsoft Online Services Technical Support and giving us the opportunity to serve you.
We have replied couple of times, but no reply from Microsoft.
How can we resolve it? We never been sending any spam, our emails are 100% legitimate.
As far as I'm concerned, Microsoft can be liable damages for disrupting legitimate correspondence.
What is the reason for our emails blocked - don't know.
Please help, we are blocked for over 1 month now.You need to check with the support to get more details and maybe they can provide you more details about the sent e-mails.
It might be that the mails were not sent by one of messaging systems but it can be a virus or a malware program that was sending e--mails from your IP to spam others. I would recommend filtering SMTP traffic to allow only authorized servers and systems to
send mails and to run virus and malware programs identification and removal on your managed systems.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
I would like to know how can I delete emails from my email block have more than 8000? Thank you.
I want to say, delete the 8000 not one by one, or 50 in 50... Minimum of 200 by
200 -
Calling a web service through an email (as a request)
Hi ,
I have a web service running in my system(web application).
My clients will send an email requesting a service(some report) to my email address. then the system should take the email as a request, process the request, make a response(report) and send it back to the client through email.
If any one have idea, please help.
thanks
Bhuvan[Axis2|http://ws.apache.org/axis2/] supports SMTP protocol. Try to explore this.
-
Converting emails to servlet requests; servlet responses to emails
Hello,
I had asked this question in the Servlet forum. They directed me to here.
I've some servlet applications that posted by HTML forms with file attachements and other HTML fields.
I want to add email support to my servlets. So, users should be able post and recieve their data by emails.
But, I don't want to add email handling tasks to the current servlet applications. I need a middleware application between end users and my servlets that converts emails to servlet requests, and servlet responses to emails.
Here are the steps:
1- End user sends email with attachments.
2- Emailed data is converted to servlet request by a middleware application.
3- Servlet request is processed by my current servlets.
4- Servlet response is sent to middleware application.
5- Middleware application emails servlet reponse to end user as email.
If I can do that, I will not have to add emailing codes to my current servlets. do you know a product doing that ? Or, can you give me a direction ?
thanks...Have you looked into JMS?
-
WRT1900AC: Can it block DNS requests?
Hello,
Can the WRT1900AC block DNS request from devices in a home network to public DNS service like GoogleDNS? Can anyone tell me what steps are necessary to accomplish this?
I tried to follow instructions found on the web but I could not add static routes under Advanced Routing, I got errors either about the network submask or the Gateway (mine is 192.168.1.1 and is not accepted). i don't know what to enter in these fields and also what Interface to select (LAN/Wireless or Internet).
My firmware version is 1.1.8.164461.
I would appreciate any help.
Thank you,
Luiz
Solved!
Go to Solution.Hi,
Thanks for replying. I haven't contacted support yet to confirm you suspicion, My cable modem is a Motorola SB6141. I have done some basic research that indicates that it is not capable of NAT.
However, I was able to configure a static route in my router,using the cable modem IP asgateway. After this my ping requests to Google DNS (8.8.8.8 and 8.8.4.4) started to fail. This is probably still not what I need. I don't understand why I can't save my router's IP as gateway as indicated here: http://help.unotelly.com/support/solutions/articles/193662-setup-static-routes-on-linksys-and-cisco-... This link alerts to a bug in Linksys routers but the error message I get is not "invalid static route" as indicated.
Thanks,
Luiz -
've gotten 60 or 70 messages that that my iCloud doesn't work and to select preferences. The message says I will get an email to verify but I never get an email. I've checked old email, blocked email, and have low filters on emails. Any ideas?
Hey CarolinQc,
Thanks for the question. The symptoms you are experiencing can result from an Apple ID address that has been changed prior to signing out of all of the services. Before you change the email address associated with your Apple ID, you’ll want to sign out of all services to avoid this. As a fix, you can temporarily change your Apple ID back to the old address:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
- Scroll down and tap Delete Account, then tap Delete to confirm.
- Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
- Enter the password for your previous Apple ID.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Return to Settings > iCloud and sign in with your new Apple ID.
Additional Information:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M. -
I know how to send SMTP emails from within apex.
but is it possible to email a meeting request.. how would that be done?
A. User picks a date,time on an apex calendar.
B. Meeting request is emailed for that date, time so the users can accept and have it added to their local calendars.Hi,
This Dan McGhan's blog post might help
http://www.danielmcghan.us/2008/06/icalendar-event-via-email.html
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
i cant't verify my icloud account, never received verification email, i did requested it from system preference menu
Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you. -
Caching Server receives non-whitelisted requests
I run a OSX Caching Server on a 10.8.3 Mountain Lion System. While this update server solution works fine for most of the client computers, one client causes unusual requests:
2013/04/01 09:51:36:104 Request for non-whitelisted URL denied (http://192.168.42.3:53783/)
THis message is generated from each attempt to access a Mac Appstore Download (this one was for the Final Cut Pro X 10.0.8 update) and after using this URL, the client simply ignores the caching server and moves on downloading this assets from Apples source servers.
The client is a Protina MBP running the official 10.8.3 build.
Regards,I have this exact problem too. Interestingly, I have this on my Mini server, then I've setup a caching server on my MacBook Pro and its the same. This log is from my MacBook Pro, its called badgerbookpro.local but its the same on the Mini server. Both are runing 10.8.3
Jun 1 01:34:22 badgerbookpro.local AssetCache[4811]: Caching server started
Jun 1 01:34:25 badgerbookpro.local AssetCache[4811]: Registration succeeded. Resuming server.
Jun 1 01:37:02 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 01:37:02 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 01:38:23 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 01:38:23 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 01:43:51 badgerbookpro.local AssetCache[4811]: HTTPConnection[0x7fdc04b1b900]: responseHasAvailableData: - Sender is not current httpResponse
Jun 1 01:44:46 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 01:44:46 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 01:45:05 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 01:45:05 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 02:51:24 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 02:51:24 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 03:55:04 badgerbookpro.local AssetCache[4811]: Server shutting down (15)
Jun 1 03:55:04 badgerbookpro com.apple.launchd[1] (com.apple.AssetCache[4811]): Exited with code: 15 -
When ASM reads my (8K) block, it will usually read much more than just the block I requested.
4 questions :
1) Am I right when I presume ASM will increase my request to 1 complete AU sized retrieval action done on the I/O subsystem?
2) Now what interests me is where does the rest of that I/O size sleep / reside ?
3) Under what circumstances will those poor, initially unused and discarded KB's be revived and be reckognized for their true value. Will only certain actions, like a scan, cause the 'overhead' to be used ?
kind regards, NiekHi Aman,
ASM does not do IOs .
ASM only gives extent map to clients and clients take that pointers and do direct IO on that block.
This is very much true statement and explains what will happen if data block is not available at buffer .
That's why most of IO errors are getting printed on rdbms alertlog file ,rather ASM .Which inturn confirms my statement...
ASM level DBWR ,LGWR are related to ASM level data processing .
Keeping above things in mind ,it clarifies ASM does not hold any IOs /place on sleep.
ASM at diskgroup level,always does IOs as per au_size of that diskgroup .
Regards,
Aritra -
Can´t deliver by Email on conditional request on Recipients
Guys: Hi, let me ask you if anyone know why i Can´t deliver by Email on conditional request on Recipients. I have a simple report with year, month, date and email fileds and create ibot with this report and the next parameters:
GENERAL:
Priority HIGH
Data Visibility Not Personalized
Run As ADMINISTRATOR
RECIPIENTS:
Determine recipients from conditional request EMAIL
DESTINATIONS:
Specific Devices EMAIL
This is the error message:
+++ ThreadID: 2510 : 2009-05-11 17:17:56.625
iBotID: /users/administrator/_ibots/PRUEBA INTELLEGO
No devices for user: [email protected]
+++ ThreadID: 2510 : 2009-05-11 17:17:56.625
iBotID: /users/administrator/_ibots/PRUEBA INTELLEGO
No devices for user: [email protected]
PD: Let me tell you that if i send with "Me" option check on Recipient, i don´t have any problem.lets say you want to send accounts associated to sales team then load sales team user id in the OLAP table and pull that column in the report and in recipients tab under determine recipients from conditional request select the user id column. Once you save the ibot it will pick the user email id from SA system subject area automatically. I have done this in my project and its working fine.
Thanks,
Sachin -
I don't know what is going on. I recieved an email saying I'm eligible yesterday and to wait 24 hours for everything to complete and not even 5 minutes afterwards I got another email saying my request was denied.
Has this happened to anyone else? If so what did you do to resolve this?
Anyone else have an idea on what happened or what I could do?You should contact the carrier that's sending you these emails and ask them what's going on.
-
RV042 v3 - Block WAN Request - bad implemented!
Hello,
I would like to ask You if You have same problem as me. I would like to allow PING on RV042 from WAN side only from specific IP address, but when I set the rule, RV042 does not respond on WAN side, because Block WAN Request is Enabled.
BUT! When I disable "Block WAN Requests", now any IP can ping my router from WAN side. Although I set access rule to Deny Ping from WAN side to anyone, it still responds.
Do you know sollution?Good morning
Thanks for using our forum
Hi Tomas Zavodny my name is Johnnatan and I am part of the Small business Support community
I'm not sure if you disable the option “Block Wan Request” your device creates a rule in the firewall, can you check this? if your device creates the rule, follow this procedure
In this priority order, create 2 rules in your firewall device.
1. A rule that allow ping your device from your specific source(s) address(es)
2A rule that deny ping from any other source.
3 With the lowest priority, the rule that your device creates.
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.
Please rate post you consider useful.
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer.
Cisco has a very useful tool called GuideMe, is made for small business products, and your device is in this category, you can use this address for accesing the tool: http://sbkb.cisco.com/CiscoSB/Loginr.aspx?alt1 = & pid = 4 & eroute = Super, is very easy to use, just complete the 3 spaces on this way:
Select a category: (Select the device type on request), eg Routers
Enter model: (Type the model on request), eg RV042
Question: (Type what you want to know about the device), eg VPN
And it'll be showing all the information you need about what you wrote. -
Publish issues and email blocks?
hey.
i have finally completed my flash portfolio. a portfolio that
i intend to send my email to hopefuly get a job...soon. (-i
obviously wont be a flash designer! haha.)
ok, 2 issues:
1. when i publish my flash to swf or projector (to the
directory where i have my files organized) everything works fine. i
guess the link are holding up.
however as soon as i relocate the swf or projector, some of
my links (that reference XML files) do not work anymore!
-the file is already like 4 or 5 meg. would embedding or
something help?
2. i really want this file to be convienant for the viewer.
so, when i send the swf file, they must have flash. when i send the
projector, some emails block the exe file. is the only way to zip
it? what do you think?
-i hope someone can point me in the right direction.
-THANKS SO MUCH!!!!any ideas?
Maybe you are looking for
-
T510 Screen resolutions error?
To my knowledge, the screen resolution of 15,6" models should be as follows: HD: 1366 x 768 HD+: 1600 x 900 FHD: 1920 x 1080 Then why on European Lenovo websites all T510 models are listed as 15.6 " HD+ AntiGlare 1366x768 ?? Here is Italy, Germany an
-
I am not able to view my pdf files
I try to view pdf files but the window that opens is all black. I do not get any suggestions on how to fix the problem.
-
AP - Supplier Sites Invoice Tab - Diff Btwn Tax code and Line Level
Hi All, In paybles options setup, the Invoice Tax calculation is set to LINE Level and Allow Tax Calculation Override check box is checked. While Defining the supplier, in the Invoice Tab of Supplier Sites, I changed it from LINE Level to Tax Code an
-
Using 24p footage and 60i footage together?
Hello, I am working on a project that will combine 24p footage and 60i footage. What would be the best way to go about combining these two. It's for a short that is shot similar to Cloverfield. I want to use 60i footage for the hand held footage shoo
-
How to restore deleted messages n311
My messages are deleted in my Nokia Asha n311 handset, how can i retrieve deleted those messages