My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

Similar Messages

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have never seen this before. Try using these installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Ipad will not turn on after trying to install ios 6.1

after trying to install ios 6.1 my ipad seems dead, the apple comes on and off, and the battery shows no life, after it has been plugged in for hours.

See Here > http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

TS2634 My iPad Charger has stopped working after plugging into MacBook Air?

Hello there,
I have owned my iPad Mini for about 2 months now, and the charger has stopped working. It sometimes works on my MacBook Air, but often I get a popup on my computer saying, "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again." I have tried plugging my iPad into a wall charger, but it still does not charge. There is a small hole and the first part of the cable from the iPad is a bit twisted. Is there any way of fixing this, or do I have to buy another?

Computer USB ports often do not provide enough power to charge an iPad efficiently. The best way to charge an iPad is with the charger that came with the iPad.
Sounds like your cable is damaged too and needs to be replaced. My suggestion would be to buy two so that you have a backup. If your iPad has a lightning connector be sure to buy a name brand cable, either Apple or another well known brand. Do not buy cheap knockoff cables on eBay and they may not be certified to work with an iPad and you'll get an error message about that when you try to use them.

ScenarioEngine.exe has stopped working when trying to install sqlserver 2014 Express with tools.

I have downloaded the enu file from MS, for the above SQLServer 2014 express edition.
After checking that all the prerequisets had been met, I extracted the files, from the enu, to a folder and ran the Setup.exe.
Immediately, I received the warning "The ScenarioEngine.exe has stopped working" and the installation stops.
I did not encounter this issue installing SQLServer 2012 Express with tools, on the same pc, and it has been running without any issues,
The pc concerned is running Windows 8.1.

SQL Server 2014
1. Save the following in a text file, change the extension to .reg, double-click on the file, and on the prompt that appears, select yes to populate the registry:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\120\Bootstrap]
"BootstrapDir"="C:\\Program Files\\Microsoft SQL Server\\120\\Setup Bootstrap\\"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\120\Bootstrap\Setup]
"PatchLevel"="12.00.2000.80"
2. Next, copy the following files and folders from the media to the specified destinations:
File/Folder in media
Destination
X64/X86 folder (depending on what architecture you want to install)
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Setup.exe
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Resources folder
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014
Next, re-run the setup, and it should proceed beyond the point of error this time.
As always, comments/suggestions/feedback are welcome and solicited.

Microsoft Setup Bootstrapper Has Stopped Working when Trying to Install MS Project Professtional 2013

I cannot get the trial version of MS Project 2013 to load onto my computer.
I keep getting "Microsoft Setup Bootstrapper Has Stopped Working" error message when attempting to download.

What operating system are you attempting to install to?

Satellite P200 - Microphone has stopped working after Windows 7 install

My Satellite P200 came with Vista Ultimate, the mic worked for a few months suddenly it stopped. I decided to install Windows 7, but mic still does not work.
Any ideas anyone?
I use this laptop to skpe my folks a lot. I can use an external mic fine, but really want my inbuilt one working again.

Hi buddy,
Sounds like its something wrong with your Windows 7 installation if the microphone doesnt work anymore...
I would recommend updating the webcam driver because the microphone is a part of it. You can find driver updates here:
http://eu.computers.toshiba-europe.com
I dont know what Satellite P200 you have exactly but if you cant find a Windows 7 driver for webcam, choose another model that is fully Windows 7 supported, e. g. Satellite P300.

I have a problem with my viber.It has stopped working.I tried reinstalliing it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .

I have a problem with my viber.It has stopped working.I tried reinstalling it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .My other applications are working fine ..other applications that require internet too are working fine.

Please get in touch with Viber's customer support.

My camera on my iPad 2 has stopped working for the second time.

My camera on my iPad.2 has stopped working for the 2nd time. Last time it just started working again after a couple of months.
I have tried closing the camera app completely & also re-booting the iPad completely but to no avail.
Any ideas anyone?

You'll first need to have iTunes on your computer - from the summary page (the one that opens when you select the iPad in iTunes) it'll give you options for backing up and restoring it. On that page just select 'restore iPad' and that'll get it started.
Hope it's just software then, those out-of-warranty replacements can get pricey.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

Wifi iPad 3 charger stopped working after updating to iOS 6, help!

Wifi iPad 3 charger stopped working after updating to iOS 6. The little iPhone charger charges it very very slowly, but the charger gets really hot after a while. I restored it and everything works but the charger. It's only a few months old, should I try a new iPad wall charger block?

Hi,
I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
Will monitor it and if no joy will go to a apple store
Thanks

Adobe Acrobat 9.0 has stopped working (after Start Form Wizard)

Downloaded Trial for Adobe Acrobat 9.0
Tried reinstalling
Latest windows 7 patches
Adobe Acrobat 9.0 has stopped working
(after Start Form Wizard)
Windows can check online for a solution to the problem
details"
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Acrobat.exe
Application Version:    9.0.0.332
Application Timestamp:    4850eb76
Fault Module Name:    MakeAccessible.api
Fault Module Version:    9.0.0.332
Fault Module Timestamp:    4850e54e
Exception Code:    c0000005
Exception Offset:    000e1059
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
===============================
===============================
SYSTEM INFORMATION
=========================
System Parameters
Available Physical Memory: 1429660 KB
Available Virtual Memory: 1912212 KB
BIOS Version: DELL   - 42302e31
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Version: 8.00.7600.16385 (win7_rtm.090713-1255)
    Creation Date: 2009/07/13
    Creation Time: 4:43:32 PM
Default Mail: Microsoft Office Outlook
    mapi32.dll
    Version: 1.0.2536.0 (win7_rtm.090713-1255)
Graphics Card: Intel(R) G33/G31 Express Chipset Family
    Version: 8.14.10.1930
    Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:25:18 AM
Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
    Version: 9.3.2.163
    Creation Date: 2010/04/03
    Creation Time: 10:57:52 PM
Locale: English (United States)
Monitor:
    Name: Intel(R) G33/G31 Express Chipset Family
    Resolution: 1024 x 768 x 75
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.1.7600
Page File Space: 4194303 KB
Processor: x86 Family 6 Model 23 Stepping 7 GenuineIntel ~2493 Mhz
System Name: DELLINSPIRON
Temporary Directory: C:\Users\alan\AppData\Local\Temp\
Time Zone: Pacific Standard Time
Total Physical Memory: 2097151 KB
Total Virtual Memory: 2097024 KB
User Name: alan
Windows Directory: C:\Windows
Installed Plugins
=================
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 1:59:50 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:05:18 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
    Version: 9.0.0.0
    Creation Date: 2008/06/12
    Creation Time: 2:08:24 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:17:10 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:00:30 AM

To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

The sound on my iPad 2 has stopped working....

The sound on my iPad 2 has stop working.....no sound in app, home screen, no locking sounds, keyboard clicks, no music, no movies.....no nothing! I have reset settings, I have tried to reboot the iPad numerous of times, I have played with the slide rocker, switched settings back and forth and yet nothing. Is there anything I can do my son iPad is now 2 years old & out of warranty & apple care please help!

With headphones?
Speakers?
Try:
- Reset the iOS device. Nothing will be lost (done)
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings (Done)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
Acrobat did an update the ability to connect to files in the Workspace has been removed.
Is there any way to reconnect the file back to the Tracker?
Has anyone else had the same problem?
Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
enjoy free web..... :)
regards,
Gautam sharma.

My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

Similar Messages

Maybe you are looking for