My iPad 1 screen only shows a faint light after being dropped 12" on it's edge.  What's up?

Does anyone have a suggestion besides soft reboot? 
thank you.

The Apple 1-year warranty does not cover damage caused by the user.
Did the glass break/crack?
Apple will provide a replacement iPad for about 1/2 the cost of a new iPad. You can get the glass replaced (or other repairs) at 3rd party repair sources for less $, however, the Apple warranty will be voided.
 Cheers, Tom

Similar Messages

  • My ipad 2 screen only shows basic colors

    My ipad 2 was dropped and now when turned on, it only shows basic colors, mainly greens and blue tones. 

    Hello bud4canada,
    It sounds like you are unable see your lock screen to unlock your iPad and get you to your home screen. I dont know if this is the reset you have done, but its the first thing I would do:
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    From: Turn your iOS device off and on (restart) and reset
              http://support.apple.com/kb/ht1430
    If this does not resolve the issue, I would next attempt backing up your device to iTunes:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Then put it into recovery mode, and restoret he iPad:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • On a IPad is there a restriction to the number of emails it access? Say there's 100 messages in my inbox but when I look at my inbox on my Ipad it will only show 50 of the most recent emails. Is there a way to see all 100?

    Say there's 300 messages in my inbox but when I look at my inbox on my Ipad it will only show 200 of the most recent emails. Is there a way to see all 300?

    Not sure whether you are saying that you have more than 200 emails in your Inbox, or that 200 are in the Inbox and the others are in other folders. If the first then (I don't have more than 200 emails in my Inbox) but if you do and want to load more then do you not get a Load More Messages option if you scroll down to the bottom of your Inbox ?
    If you want to be able to search multiple email folders then I don't think that you can do it within the Mail app itself, but the spotlight search screen (swipe your first homescreen to the right) can - you can control what is searched by spotlight via Settings > General > Spotlight Search

  • Custom splash screen only shows up when command line is used...

    Hi,
    Everything in my Java web start application works perfectly but, the custom splash screen only shows up when command line is used ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"), if I use the shortcut on the desktop or in the start menu, the Java 7 splash screen shows up (tested under Windows Vista and Seven). Does someone have any clues?
    Thanks...
    My jnlp file :
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="6.0+" href="AcSent.jnlp">
      <information>
        <title>AcSent : Commande de repas</title>
        <description>AcSent - Commande de repas</description>
        <vendor>AcSent</vendor>
        <homepage href="http://www.xxx.eu" />
        <icon href="acSentIconBiseau.png" />
        <icon href="splashAcSentRC.png" kind="splash" />
        <shortcut online="true">
          <desktop />
          <menu submenu="AcSent" />
        </shortcut>
      </information>
      <security>
        <all-permissions />
      </security>
      <resources>
        <j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" max-heap-size="128m" />
        <jar href="AcSentJnlpProgressIndicator.jar" download="progress" />
        <jar href="AcSentJnlp.jar" main="true" version="1.0" />
        <property name="jnlp.packEnabled" value="true" />
        <property name="jnlp.versionEnabled" value="true" />
      </resources>
      <application-desc name="AcSent" main-class="eu.acsent.jnlp.AcSentApplication"
           progress-class="eu.acsent.jnlp.progressindicator.CustomProgress"> 
      </application-desc>
    </jnlp>

    Hi again,
    I made some researches :
    - The link in the generated shorcuts ("C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp "C:\Users\Arnaud\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\46\69c1e9ee-1f252d1a") is not the same as the one I use in the command line ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"). Is there a way in the the JNLP file to tell how to generate shortcuts (not the icon, etc., but command line options)?
    - This sample (https://blogs.oracle.com/thejavatutorials/entry/changing_the_java_web_start) displays the splash screen when I click on the the generated shortcuts (I use Windows 7). I have copied the ButtonDemo jar file and the JNLP file on my IIS web server (Windows 2008 Server), this time the splash screen does not show up when I click the generated shortcuts but always shows up when I use the command line. Can someone tell me if it is a trouble with IIS ?
    Thanks again...

  • I restarted my computer, but the screen only shows a flashing folder icon with a question mark. What to do?

    I restarted my computer, but the screen only shows a flashing folder icon with a question mark. What to do?

    It means that the system boot directory can't be found.
    See this support article for suggested actions
    Also see this discussion.

  • Iphone seems to be working but only shows apple logo, itunes sees the phone normally, when i restored it appeared successful and itunes tried activating my phone but the screen only shows apple logo nothing else???

    my iphone is detected in itunes as normal, but screen on the phone only shows apple logo??? restored and everything but no difference its weird, it restores successfully and stuff but once done the screen only shows apple logo.. note:while restoring everything goes through as normal on the phone it shows the bar loading etc.. but once complete just stays on apple logo.

    It can take a few minutes to reinitialize, but if it stays on the Apple logo for as much as 10 minutes there is something seriously wrong. Try restoring again, and set up as a new phone rather than installing your backup. If this fixes it you have a corrupt backup. If this doesn't fix it the phone is broken. Or possibly jailbroken.

  • HT201406 while trying to update my ipod touch  something happened and now my screen only shows the apple logo and nothing else happens

    while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201269 one fine day, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working .  May i know how to proceed to recover lost conta

    one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working .  May i know how to proceed to recover lost contacts.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • HT1386 iphone is frozen.  the screen only shows the usb plug icon, the word itunes and the itunes logo.  the whole phone is frozen

    iphone is frozen.  the screen only shows the usb plug icon, the word itunes and the itunes logo.  the whole phone is frozen

    Connect it to your computer and open iTunes, it will probably prompt you to restore it.

  • HT201210 My itouch screen froze showing "plug to itunes" after trying to update to iOS6. Is there any ways to export all the pictures from it before restoring?

    My itouch screen froze showing "plug to itunes" after trying to update to iOS6. It still can be turned on and off. But the screen froze showing that message. I perhaps need to restore it. But is there any ways to export all the pictures from it before restoring?

    Only if y can get the iPod out of recovery mode with the program. Otherwise you will have to restore via iTunes which erases the iPod.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Tv screen only says ITunes and light flashes continually. Can't use.

    Tv screen only says ITunes and light flashes continually. Can't use the system.

    It is telling you to connect to iTunes via micro usb, as it needs to be restored
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

  • HT1446 My Mac book pro black out just so, and the charger show a blinking light after I pressed the power button (green to yellow)

    My Mac book pro black out just so, and the charger show a blinking light after I pressed the power button (green to yellow)

    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • Why don't oam files placed in indd cc show up in ibooks after being exported as an epub?

    Why don't oam files placed in indd cc show up in ibooks after being exported as an epub? I work on a PC not a mac and have done everything described in tutorials. OAM animations are not working. please help.
    Thank you.
    Kathy

    This discussion explains the whole issue. Nothing has changed since it was written:
    How to add Edge Animate Web Publish to FL EPUB 3 for iBooks.

  • The background on my ipad is pink and constantly moving after being dropped

    the background on my ipad is pink and constantly moving after being dropped.  Any suggestions?

    Hello mickd1505c,
    Thanks for using Apple Support Communities.
    It's appears as though you need to seek hardware service for your iPad since this occurred after you dropped it.
    iPad Repair
    http://www.apple.com/support/ipad/repair/other/
    Take care,
    Alex H.

  • My ipad is now only showing a black screen with the apple icon and doesn't appear to be charging despite being on the AC adapter all day

    My ipad had an icon on it after being on the charger all night that indicated it needed to be plugged into itunes.  I did this, and then it said it was going to do a restore, I confirmed I was ok and then left it on the computer all day and now the best I can do is get the apple icon on a blank screen.  It occassionally changes to show that it has no battery and then goes back to the apple icon.  How can I restore it?  Any other ideas?

    (A) Charge your battery
    (B)Try and force iPad into Recovery Mode:
    1. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    2. Connect USB cable to computer, leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

Maybe you are looking for

  • How do I add the Firefox icon to my mac os 10.4.11 tool bar?

    I just upgraded to firefox 4 and the icon disappeared from the toolbar on my mac screen. How do I get it back?

  • Dynamically Changing Labels for Multi Row Block Buttons

    Forms [32 Bit] Version 9.0.4.1.0 (Production) Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production On my local: Windows 7 OS I am having a difficult time in doing the following in forms, and not sure if it can be done? I have

  • Embedding a youtube video in Powerpoint 2010 via a shockwave flash object

    We have a user, has found recently, when he adds a 'shockwave flash object' in Microsoft PowerPoint 2010, and adds a YouTube link, next to the "movie" field within the properties of the shockwave flash object, it will not show the YouTube video windo

  • Ipod windows to new imac?

    Any information on how to transfer songs from an ipod that was previously used with windows to a new imac? There is no hard back up of the windows itunes cause the computer is fried. The Manual manage doesnt seem to be working correctly with the ipod

  • Item billing plans are not linked to Header billing plan

    Hi Experts, Now I am working on SAP CRM 7.0. Here we want to link Item Billing Plans to Header Billing Plan. When i am trying to attach Item Billing Plans to Header Billing Plan through Item level --> Item Billing Plan tab the option (Header Billing