My Ipad 1 won't restore after update and i got a itunes error (21)

i updated my ipad 1 to iso 5.1 then it pop up to restortion mode.
I went to restore it but this one pop up:
IT XP DUH!

Im having the same problem and practicly the exact same story hahaha, my old iphone broke so my uncle gave me his old 3gs but everytime i try to update or restore it it says that it was corrupted during download.

Similar Messages

Please help, My Ipad won't restore after update!

Itunes starts to restore then stops with no error message. the ipad is completely useless. I've restarted and reset several times and ive changed USB ports. It is recognised in iTunes and begins to restore, the ipad shows the progress bar, which also just freezes with no error message.

See here! Help with unresponsive ipad!

Both iPod and iPad won't connect after update.

Both iPod and iPad won't connect after update. iTunes says "can't allocate a resource"

I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
Follow these steps to reset the Lockdown folder:
Disconnect all iOS devices from your computer and quit iTunes.
From the Finder, choose Go > Go to folder.
Type the following and then press Return:
/var/db/lockdown.
The Finder window should display one or more files with long alphanumeric file names.
In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
Reconnect your iOS device and open iTunes
My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

Ipad 2 wont restore after updating to ios 7

ipad 2 wont restore after updating to ios 7

Hello pinky03,
I would be be concerned too if I was not able to restore my iPad. If you have not resolved the issue, I recommend following the steps in this article for an issue like this:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Best,
Sheila M.

ITunes 10.5 won't open after update and System Restore

I upgraded to iTunes 10.5 days ago on my laptop running Windows Vista 32bit.
Download and install went ok. Tried to open iTunes it just won't load.
I click on the iTunes icon from the start menu or the desktop and only the "circle" signifying "wait" pops up for a few seconds then it goes away.
iTunes.exe shows up in Windows Task Manager for a few seconds, then disappears.
There is no error message or pop-up during any of this.
Quciktime Player and Quicktime both work though.
I had to do a System Restore for my laptop recently because it would not boot up correctly. It kept saying "loading" but never actually load, so I took out the battery and had to system restore it.
Please help and thanks so very much in advance!

iFOUND the Solution!!!
Go to Add/Remove Programs under Control Panel and for every program that is Apple - iTunes - Quicktime related RIGHT click on it and choose "Repair" and repair it. May take some time for each program.
Then, I got an error message saying:
"the file "itunes library.itl" cannot be read because it was created by a newer version of itunes."
Here, from the Start Menu, search "Apple Software Update" and update every program it says needs updating. I recently this week updated Quicktime to its latest version, but did so anyway. So I updated Quicktime and iTunes...restarted computer...and it worked.
That's how you do it. iTunes 10.5 works fine now. Hope it does equally well for you.

Ipad won't start after updating to ios 8.1.3

My iPad was working without issue prior to updating to IOS 8.1.3 yesterday. After updating, not only would the ipad not start, it produced intermittent tones. The tone heard when device is plugged into an outlet for charging.
I attempted to turn the device off but it would not respond. Afterwards, a reboot was attempted numerous times by holding the home and sleep buttons down simultaneously. Once the Apple logo appeared the buttons were released, the logo disappeared but the device remained dormant.
While connected to iTunes and emitting the connection tones, periodically the splash screen would appear momentarily then turn off. I was able to swipe the screen on one of these occasions. The device worked properly until it was turned off after use at which time it would not turn on again and remains unable to turn on. It does not respond to attempts to turn it off or rebooting.
Prior to the update I did backup the device in case something like this would occur. Since I appear to have exhausted all my options to get the device to work, I feel the only remaining option is to restore it to factory default. I would appreciate advice from anyone who may either have experienced this same issue and found a resolution, or can provide thoughts on how I should proceed please.
If I proceed with a restore to factory default followed by a restore of the most recent backup, will I lose any data during this process? This will be my first time to erase a device so any thoughts would be greatly appreciated. I would, of course, prefer an alternative resolution. Thanks in advance for your help.
tony

Hello, Tony.
Thank you for visiting Apple Support Communities.
I understand that your iPad no long starts after an update and you have a backup for your iPad. It sounds like you will need to restore the device to factory and then will have the option to access your backup after the restore complete. The only information that should be missing would be after the backup was completed until the device is restored. I have included the steps for going through this process in the articles below.
If you can't update or restore your iPhone, iPad, or iPod touch
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
-Jason H.

My iPad Won't Rotate after updating to iOS 6.

After updating to iOS 6, my iPad2 won't auto rotate. I already checked if the rotation was locked, so this isn't the case. I tried restarting it and rebooting it. The only possible way to rotate the screen is to turn off the iPad, rotate the iPad, then turn on the iPad again. Please help me, I don't know how to fix this problem.

I had same problem post upgrade to iOS 6.1.3
I went to
[Setting] [General] and set the
[Use_Side_Switch_To] option from [Rotation ...] to [Mute]
Checked switch by manually flipping the button on iPad cover (next to volume) back and forth and seeing images of mute actions appear sceen centre
But on checking further not all apps rotated automatically ... so ...
Manually closed all open apps by:
Screen button x2 in quick succession bottom bar appears with all active apps
Touch and hold on of these apps in this bar untill the x appears on them and the wobble
Close each one down by touching x
Then
Rebooted ( ... just like a Microsoft machine :-)
Now all working working ... boy you really miss that feature when its not functioning ...
Dont know if all steps relevant but this is what worked for me ...
... best of luck
Message was edited by: citizenpips

Ipad won't start after update 8.2

after updating my ipad it won't work just stuck on the start screen (the one with the white apple logo) .. i had tried to restart it and re install the update from itunes still the same problem ..

it's done thank you it back .. ^_____________________^

HT4623 My iPad won't load an update and therefore now won't connect online. Csan anyone Help?

My iPad won't update and therefore can't connect online. Please help! Why won't it update?

Try booting your I pad.

Ipad won't sync after updating to snow leopard

Any help available regarding a non-syncing ipad first gen, after updating to snow leopard on my imac? The ios software on ipad is up to date, and the snow leopard version is also up to date. The computer will not even recognize that the ipad is connected. Thx.

Try something very simple first. Quit iTunes, reboot the Mac and restart the iPad. Then try again.
I had some issues when I first installed SL on my last MacBook, and I still have issues every now and then with the iPad not being recognized (now running Lion 10.7.3 on a new MacBook Pro) and this has always worked for me. You may have to reboot the Mac a couple of times - but try it and see if it works for you.

It won't restore after Updating to IOS 6

After updating to IOS 6 my ipod shows the following message constantly "itunes has detected an ipod in recovery mode you must restore this ipod", I need HELP!

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

IPhone won't restore after update to iOS 5

I recently tried to upgrade to iOS 5 on my iPhone 4 but whenever I do, I receive the message: "iTunes was interrupted while restoring the contents of the iPhone “Thundercracker”. Would you like to restore this iPhone again now?" I've tried several times, with no interruptions, and can not get the iPhone 4 to restore from backup. The last backup was made immediately before the update and the iPhone was pretty full before upgrading.
Anyone else having this problem? Any ideas on how to get my information back?

When I tried to update to ios5 it gave me an error as well and stayed on the iTunes screen saying the device is in recovery mode along with an error number. Now,I had gone to apple store previously with this issue when tryin to restore my iPhone only. They said that sometimes the software might be crashing because of an app. The solution is to restore it as a New Phone. Then Put everything back manually. So when I was on the process of installing the new iOS 5 the error seemed to be similar and apple gives you all the troubleshooting codes and fixes. I had to put a command before proceeding. I did that and it seemed to work for one of the iPhones, I was updating 2 iPhones at the time. Then for the other one when it stayed on the iTunes screen I just disconnected and connected the USB cable again and instead of doin update I did restore first and then update and that solved the problem. After restoring it will automatically update and put the information you had before the update back to your iPhone .
http://support.apple.com/kb/ts1275
http://support.apple.com/kb/HT1808
Hope this helps

VMs won't start after updates and reboot.

I need some help.
I installed the November 2014 MS updates last night. I installed them on my lab Hyper-V box. The Hyper-V box is joined to a domain but is not a domain controller. It is Server 2012R2 with Hyper-V with all previous patches applied. I had two VMs configured
on the box. The VMs were a 2012R2 server and a Windows 8.1 box. Both were running fine. In fact I shut them down before I did the Microsoft Updates on the server.
The issue I describe below was not present until I did the updates and rebooted. The server and the associated VMs had been running fine for months. These updates are the ones that my SUS server provided to this server.
After I rebooted the server I could not restart either VM. I kept getting the same error that is listed below. I tried DELETING the VM from Hyper-V manager and then building a new VM and using the old vhdx. Again NO LUCK. I even tried CREATING a new VM and
I got the same problem.
(Additional Note: I appeared as though I was able to delete the VM from Hyper-V Manager. Hyper-V Manager displayed 'Destroying....' for some period of time and then the VM was removed from Hyper-V Manager. However, recreating the VM did not solve the problem.)
Each time I get the following error displayed on screen.
'Unnamed VM' could not intiialize.
An attempt to read or update virtual machine configuration failed
'Unnamed VM' could not initialize (Virtual Machine ID)
'Unnamed VM' could not read or update virtual machine configuration: Ran out of memory (0x8007000E) Virtual machine ID B9xxxxxxxxxxxx
=======================
I adjusted permissions on the C:\ProgramData\Microsoft\Windows\Hyper-V folder. Opened it up to "Authenticated Users" based on a couple of TechNet articles that I found. NO luck
In the Hyper-V Config log I get the following entry,
The configuration store at'' is not accessible Unspecified error(0x80004005)
==========================
I also had these errors in the Windows Application log.
ID=1000 Source=Application Error Type=1 Message=Faulting application name: vmwp.exe, version: 6.3.9600.17334, time stamp: 0x5407c751
Faulting module name: vsconfig.dll, version: 6.3.9600.16384, time stamp: 0x5215db66Exception code: 0xc0000194
Fault offset: 0x000000000001966c
Faulting process id: 0xb84
Faulting application start time: 0x01cffe274d55ea6b
Faulting application path: C:\Windows\System32\vmwp.exe
Faulting module path: C:\Windows\System32\vsconfig.dll
Report Id: d4210450-6a1a-11e4-80d6-0019b9eed814
Faulting package full name:
Faulting package-relative application ID:

OK,,so I solved this issue by removing the Hyper-V role and then readding the role. The permissions of C:\Programdata\Microsoft\Windows\Hyper-V
and C:\Users\Public\Documents\Hyper-V definetly changed
as a result of re-adding the role.
All required updates (as supplied by WSUS) are applied also.

My iPad won't restore after after I attempted to update.

Now iTunes won't even recognize my iPad. Advice is welcome!

Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

ITunes won't start after update and restore

I have update iTunes to the latest version yesterday. Up to her everything is fine. Due to ther issues I had to go back to the Windows RESTORE point previous to the iTune installation.
When I start iTunes I get the following pop-up: "iTunes cannot runbecause some of its required files are missing. Please reinstall iTunes".
I do that and when iTunes try to connect to the store it shows broken links and the whole thing hangs.
I have tried to unistall iTunes, but it does not help at all. This means that I do not have connection to iPod. I cannot believe that I have to re-install all my PC bcause of this

I have update iTunes to the latest version yesterday.
Up to her everything is fine. Due to ther issues I
had to go back to the Windows RESTORE point previous
to the iTune installation.
When I start iTunes I get the following pop-up:
"iTunes cannot runbecause some of its required files
are missing. Please reinstall iTunes".
I do that and when iTunes try to connect to the store
it shows broken links and the whole thing hangs.
I have tried to unistall iTunes, but it does not help
at all. This means that I do not have connection to
iPod. I cannot believe that I have to re-install all
my PC bcause of this.
I have discovered that QuickTime is corrupted. I cannot unistall it and if I try to re-install it nothing happens.
Is there a manual way of removing it from the system?
Which keys/modules do I need to remove?

My Ipad 1 won't restore after update and i got a itunes error (21)

Similar Messages

Maybe you are looking for