My ipad 1st generation will not locate wi-fi networks. i have reset and have done router reseting, still nothing. any suggestions?
my ipad 1st generation will not locate wi-fi networks. i have reset and have done router reseting, still nothing. any suggestions?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
I know that this is not an issue with my internet not working, because I have this problem regardless of which wireless network I am connected to. Thank you!
Try unistalling and reinstalling
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
http://get.adobe.com/flashplayer/otherversions/
Also see this:
Re: I am unable to watch youtube videos online
created by Linc Davis in MacBook Pro - View the full discussion
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
1. If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
2. If you're getting a "blocked plug-in" error, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
3. Triple-click anywhere in the line below on this page to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Delete the following item, or anything with a similar name, if present:
• Flash Player (failing).plugin
You may be prompted for your login password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
4. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
5. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
6. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
7. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Hope thi helps
Credit Linc Davis -
My Ipad (3rd generation) will not back up to iCloud
My iPad (3rd generation) has not backed up since Sept. 14. I have the latest iOS 8.1.3. It starts but ends abruptly. Any suggestions?
Howdy gigi40,
If I understand you correctly you can tap the "Back Up Now" and it appears to start, but it then stops and nothing happens. I would start by quitting the Settings app on your phone:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
Cheers,
Sterling -
ICloud Password enter box keeps popping up and will not let me Cancel. Just started this and I don't want to be in ICloud at all. Using OSX 9.1 Thanks.
Hi db429,
Thanks for using Apple Support Communities. You can sign out of iCloud completely using System Preferences > iCloud:
OS X Mavericks: iCloud preferences
http://support.apple.com/kb/PH14348
Please note the information in this article if you opt to sign out of iCloud:
OS X Mavericks: If you sign out of iCloud
http://support.apple.com/kb/PH14353
Cheers,
- Ari -
Operating System: os x 10.9.1
Airport Utility 6.3.2
Airport Express 802.11n (1st generation)
Linkus router: Model WRT310Nv2, Firmware Version 2.0.01
Motorola Cable Modem: Model 2210-02, Firmware 7.7.3r5
The Airport Express (AE) is setup to join my wireless network using Airport Utility. A printer is connected to the AE with a USB cable. After the setup the AE light is green and the printer can be accessed over the wireless network.
The problem starts if the router is cycled off/on. Now the AE will not rejoin the wireless network and there is a non-flashing amber light. If the power to the AE is cycled off/on the AE reconnects to the wireless network.
This is about as handy as a screen door on a submarine.
Is it possible to see the setting of the AE the same way the modem and router settings can be accessed? Can this issue be fixed?If they send you a replacement printer it will have ink tanks with it. You can store the ink tanks from your current printer and use them later on you "new" printer if you wish. Store them nozzle-up so they do not leak.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes
Hi meganisawsome,
If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
Apple Support: Charging your iPod battery
http://support.apple.com/kb/HT1384
If you are still having issues after charging, you may want to look at this article:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Regards,
- Brenden -
Ipod touch 1st generation will not sync with itunes
plugged ipod touch 1st gen in to computer wont register that its even plugged into itunes the ipod touch charges when I plugged it in just wont register with itunes and itunes syncs with my other ipod just not with this one.
Win7
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
If you want, you can then update your iPod to iOS 3.1.3, the last update for the 1G iPod:
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage -
My new iPad will not remember passwords.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Ipad 4th gen will not upgrade from v 6.1.6 to 8, have current update on Itunes
I have a 4th generation touch which will not upgrade. I did all the steps I could find, but have not done a reset. I have a current v of Itunes on my laptop which is on a windows operating system. I can down load apps and there is no problem in recognizing my account. I can not upgrade some of my apps because my ipad is not up on its version. Anyone know how to fix this?
The fourth generation iPod touch can't be updated past 6.1.6; iOS 7 requires at least 512MB of RAM, and iOS 8 requires a dual-core processor.
(114731) -
Hi, I cannot get my iPad 2, iPhone4 (nor husbands HTC One) to connect to my wifi network. However, my Mac desktop connects perfectly. On the other devices I just get an error message saying that Safari cannot connect to the internet. This has been going on for a few days so I've tried all the fixes I can find on the web (restarting modem/router, forgetting netork settings, etc), but nothing seems to work. I've done all the latest updates on my devices. Any suggestions would be greatly appreciated!
Thanks in advance.Hello Csmo2013,
Since multiple devices from different manufacturers are having the same issue, I think it would be a good idea to test the mobile devices on a different network to see if they work. That way you can isolate the issue to being with the router/modem or not. I see you have already restarted the router/modem, and forgot the network settings on the devices, but allow me to offer this article for assistance.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
This section in particular:
Unable to access the Internet while connected to Wi-Fi
If you are using a public or commercial network that requires a login or subscription, see this article for more information.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap >.
If your IP address is 169.254.xxx.xxx, see this article.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Cheers,
Sterling -
MY touch will not come on all of a sudden, but when i plug it in it has to boot up and will shut itself down. i have rebooted it to factroy settings and reloaded back up from itunes but still will not work. does anyone have an ideal what would have cauced it to start and how i can fix it?
If you restored to factory defaults/new iPod and are still haveing the problem than an appointment at the Genius Bar of an Apple store is in order.
-
My Ipod will not power on, it is fully charged and if I plug in into the computer it doesn't even ackowledge it. Any suggestions?
Try a hard reset and go from there.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
My Iphone 4 S will not unlock from previous network. O2 says they have unlocked it.
Itunes will not complete the unlocking process.
finnyzx wrote:
Hi Guys,thanks for your replies and suggestions. I had bought the phone from my nephew as he had upgraded to an Iphone 5. It has come to light (after many days of strife, frustration, and visits to various mobile phone shops, without success). The Iphone must be unlocked from the original Itunes account IE the original owner of the phone, not the person who buys it. I hope this information will be helpful to others who find themselves in this situation in future. None of the staff at the O2 or Vodaphone shops or online support could tell me why the phone would not unlock. The message I was getting on the phone was telling me the phone could not be unlocked at this time and try again later. If problem persists contact customer services (Apple.....good luck with that one with a second hand phone over a year old). My phone has now been unlocked by my nephew after a whole load of hassle Thanks Guys. Paul.
That has always been the case, the original owners needs to unlock the phone thru the carrier. One of the qualifications is that you have use the carrier service. -
Daughter Lost her Iphone 5S two days ago. Initially thought it was misplaced at friends home however have searched endlessly without luck. Icloud may not have been set up previously ( Im not entirely sure) however when logged in on a computer the Find my Iphone through Icloud does not show her device so assuming it was not. Therefore cannot see it there of lock it. Any suggestions?
If you don't see it on the devices list in Find My iPhone, it probably wasn't enabled on her phone. Also, the phone must be turned on with a connection to the internet in order to be located even if Find My iPhone was enabled.
If Find My iPhone was enabled there is no way to track it. All she can do is physically look for it or call her number to see if someone answers.
You might also want to read this: http://support.apple.com/kb/HT5668. -
My Battery will not charge battery is at 4% now since I've purchased the new battery, When the adapter is plugged in it does not charge with the adapter or the AC cord. Any ideas what could be the problem, will I have to replace the adapter?
Model Name: MacBook
Processor Speed: 2.4 GHz
Battery Information:
Model Information:
Manufacturer: DP
Device name: ASMB013
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0000
Hardware Revision: 0000
Cell Revision: 0000
Charge Information:
Charge remaining (mAh): 217
Fully charged: No
Charging: No
Full charge capacity (mAh): 4947
Health Information:
Cycle count: 5
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 10376
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0000
Wattage (W): 0
Revision: 0x0000
Family: 0x0000
Serial Number: 0x00000000
Charging: NoOpen SystemInformation (in Utilities), click 'Power' in the left Navigation panel, then at the right make a screenshot of the whole part called 'Battery Information:' and post it here, please.
I would avoid the use of DiskWarrior, at least for now.
You may also start DiskUtility and do the 'verify disk', the message at the end of the verify should end with the word 'OK'.
Maybe you are looking for
-
Disable tab/window priority page loading
I'm going to use youtube as an example, but this is true for many other sites. Say I go to youtube.com and cmd-click on a couple links so they open in new tabs. The videos in those tabs won't begin loading until their tab is selected. Again, it's tru
-
I have done the configuration for dispute management in ECC6 and When I am trying to book a case in FB03, Environment - Create dispute. Then I am filling all the details regading the case. Then when I am saving the case, the following error message a
-
BPC Best Practices: Sales Planning (BP2)
Im trying to follow these instructions: 1. Log on to Interface for Excel. To do so start the SAP BPC Launch Page from your desktop icon or via the Start menu of your desktop, then in the Programs folder choose SAP -> Business Planning and Consolidati
-
Hello All, We were trying to extract data from ORACLE sysetm. Source system and bw system have oracle database. We have successfully created source system at BW side and is able to connect to oracle source system. But when we try to see the tables (u
-
Connecting Throughthe car stereo
Hi I can connect the BB ( curve 8520) through into the car stereo using the car's an auxiliary socket and a double ended stereo jack cable. The sound is clear as a bell Does anyone know how can I cheaply find a way to use the mike hands free and h