My Ipad 2 (after the latest update) now runs out of battery every day....and I am not on it very much. I have tried turning it off and on again...no better.

My Ipad 2 (after the latest update) is burning through battery...even when I am NOT on the Ipad2....I have turned it off and on again....no difference...what else can I try...seems like I live with it pluged into power.

http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
recalibrate the battery, let the device run out of battery to where it shuts off and then fully charge it without using it.

Similar Messages

  • HT1476 My phone was fully charged and while talkng, it went to a blank screen.  It will not come back on.  I have tried turning it off and back on, but it doesn't do anything, just keeps the blank screen.

    While talking on the phone this morning, it was fully charged, the screen went blank and I could no longer use the phone.  I tried turing it off and then on, but it still ghad a blank screen.  I even tried charging the phone, but it still has a blank screen.

    I am sorry to hear about your phone.
    You could try connecting it to your laptop and see if itune recognises the phone.
    If it does then make a backup of your phone.
    You could then restore it and see if it helps.
    It shouldn't be much of a problem if its a software issue but if something went wrong with the hardware then you might have to go to an Apple store.
    Hope this helps

  • I have tried to update my iPhone 5c and it is stuck on "connect to iTunes" I have tried turning it off and then back on and it will not work. iTunes does not seem to detect it while it is plugged in.

    I have tried to update my phone and it is stuck on "connect to iTunes" I have plugged it up to the wall charger because i have read that the new update can cause a battery drain and i have tried to reset it. None of this is working. Please help.

    Device not detected in iTunes for Windows

  • What is cloudflare and why is it on my ipad after the latest update?

    I am trying to access etsy.com via safari on my ipad. I keep getting this message.
    "You've requested a page on a website (etsy.com) that is on the CloudFlare network. CloudFlare is unable to resolve your requested domain."
    Thiss has only started after my latest update earlier this week. This seems to be the only website where I get this message. Can someone please tell me who is cloudflare, why am I getting this message and  how do I fix this.
    Thanks for any help. I am not a techie so plain English is good.
    gaila

    I'm not sure why you posted the Pinterest extension link, but I had no problem accessing etsy.com. Try clearing Safari, force close the app and then reset your iPad. Then see if you can access the website.
    Go to Settings> Safari> Clear Cookies and Data.
    In order to close apps in iOS 7, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    SInce you are not that techie, by your own admission, if you can't get the hang of force closing the app, just clear Safari and reset the iPad and then try again.

  • My IPhone stopped working right after I did the most current update, yesterday.  The screen has a picture of the usb cord, pointing towards the ITunes logo. I cannot use the phone at all.  I have tried turning it off and on.ITunes won't recognize device

    Hi there,
    Can someone please help.  My IPhoneS stopped working right after I did the latest update which was yesterday.  Now, the phone does not work at all.  When turned on, the screen shows a picture of USB cable pointing to the ITunes logo.  I have tried just about everything, and cannot get it working. It's like it is frozon.  My ITunes does not recognize my device.  Cannot dial out either. I desperately need to get it working.  Can someone please help me. 
    Thanking you in advance for your help.  :-)

    The update did not do anything.
    AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
    The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
    Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network.

  • TS1559 My iPhone 4s shows does connect to my wifi router but then after a while it shows still connected but does not open a page. I have to turn wifi off and on again to get the job done. it is annoying.

    I am using iPhone 4s. I can connect to my home wifi network but it works briefly, then whilr it shows connected with good signal strength, but I can not open a page in safari. I have to turn off the wifi and turn it on again for connection. This goes on and on. Very annoying. Please can anyone solve this problem?

    Hi ,
    thx for the feedback,to clarify my question :
    1-i am able to connect to any wifi network in airports, public places , my home , office , etc.o to get in is no problem.
    2-I can also log in into a specific website eg: was in Paris 2 days ago and could log in into the portal of a wifi provider.
    3-But when i have to log in providing an e-mail address or other info , i get into a loop where i can not get into the next page but i do get always redirected to the page asking all the info.
    This is not only at an airport , i do have it also with my own internet service provider , even if i want to log in from my home into their webmail site i get into this loop where after putting in all the inlog data i get that same page back every time.( i can get mail through my normal mailbox , no problems here)
    I do have indeed OS 6 and it is an iPad 2.I do not have the problem with an iPhone 4 S when i use wifi and here i also do have os 6 !!

  • My IPod is not showing up in my Itunes, I tried my phone as well and it is not coming up either.  I have tried everything including uninstalling and reinstalling.  It worked the other day but it is not working now.  Please somebody help me!!! What to do?

    Hello,
    Can someone please help me!?  I am trying to put music on my IPod and it was working the other day.  I can not get itunes to recognize my Ipod.  I have tried to unistall and reinstall Itunes.  I have tried all the steps on the site and can't get it to come up.  I tried my IPhone which was also showing up just the other day and it also is not showing in Itunes!   Please help me.  I need to be able to put music on my IPod for my work. 

    I have sorted it myself!!
    Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem.

  • TS3221 help! my iphone 4 has an apple displayed but is frozen and it appears that it has not completed downloading from itunes..Ive tried turning it off and on. Ive also tried to remove microsim and the apple is still present on screen..what do i do know?

    Ive tried to update all my applications from my computer to my iphone4 and while my phone was trying to sync them. I have now an apple icon displayed on my phone and it has 'frozen up'. tried turning on and off but apple icon still remains. tried shutting down computer aswell as removing the Micro-Sim on my phone and still no change.. what is going on?

    Plug in with Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually up to 20 seconds of holding both buttons.
    If still problems and you decide to Restore the iPhone Firware. Then open iTunes on computer, connect iPhone to computer. Then hold both Home and Power buttons until the iPhone is recognized in Recovery Mode. Restore the Firware. Usually takes about 20 seconds of holding both buttons.

  • I have tried to download an app from the App Store for my I phone 4s with iOS 6, it is saying unknown error occured! I have tried turning phone of and signing out of the App Store but it will not let me sign back in saying the same thing, unknown error oc

    I have tried to download apps from the App Store, after entering my password it come up with unknown error occured! I have tried signing out of the App Store but it will not let me sign back in again! What can I do?

    Newton91 wrote:
    I have tried to download apps from the App Store, after entering my password it come up with unknown error occured! I have tried signing out of the App Store but it will not let me sign back in again! What can I do?
    Download them to iTunes abd then sync the apps. Make an appointment with Apple and see what the problem is.

  • How can I fix my connection to Safari and email after the latest update to iOS7 on my iPhone and iPad?

    I can't connect to the internet on Safari or read my email after the latest update to iOS 7.0.2, is there a new fix coming or is there someting I can do beyond restarting my iPad and iPhone?

    azwanelias wrote:
    my iphone 5s is jammed after downloading IOS 8.0.2 and now i cant use my iphone and it has the sing of itubes in RED which is wired how can i get my phone to work? and its not letting me restore on itunes of my PC
    I don't really understand your comment about "sing of tubes in RED which is wired". But if you are referring to the display of iTunes and the USB port that is an indication that you must restore your iPhone by connecting it to your computer via USB and then using iTunes on the computer to restore it.

  • I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • I used to be able to attach a document to an iCal entry.   After the latest update, it appears this option has been removed.  How can I add an attachment now?  Thanks!

    I used to be able to attach a document to an iCal entry.   After the latest update, it appears this option has been removed.  How can I add an attachment now?  Thanks!

    Hi Dan,
    Yes, iCal 4.0.4 (1395.7). In edit mode, the 'attachments' option is between 'Invitees' and 'URL' (see below). As I said this is for calendars under On My Mac, I suspect you are not seeing this as your event is on MobileMe.
    Best wishes
    John M

  • I updated the IPAD with the latest update and now when I turned on and I get the Itunes log and nothing elser

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    Hi ....
    "I get the itunes logo and then nothing else"
    Use Recovery Mode >  If you can't update or restore your iPhone, iPad, or iPod touch

  • After the latest updates my iphone and ipad mini just won't appear in itunes.

    After the latest updates my idevices (phone, pad2 and mini) just won't appear in itunes. Have also updated drivers and re-installed itunes several times, but with no luck. Any help out there? PS: I am using PC....

    Different cable? Checked in Device Manager to verify the proper driver is installed and also manually installed the driver?

  • I lost artwork after the latest update?

    After the latest update I lost most of my artwork but oddly not all of it. I am now trying to fix the issue and have run into a roadblock: the artwork won't take. I've tried several different approaches to adding the artwork but none of them are showing up on my iPad, though it looks like they are there on my iMac. I manually manage my music so I can't sync the stuff. When I tried deleting an album and replacing it my iTunes freaked out ("preparing to update" and a swirly mouse pointer is all I get.)
    How do I fix this issue?
    I'm a bit obsessive when it comes to having the artwork boxes filled so this is driving me a bit crazy... ugh.

    Okay. You've mentioned an iPad and an iMac and iTunes. So what brings you to the iBook Discussions?
    When posting in one of those other discussion areas, it may be helpful to include which version the OS and iTunes you're running on the Mac you're using to sync the iPad.

Maybe you are looking for

  • Setting Up Apple ID

    I am trying to create an apple ID for my son but when I do I get this message. "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID." th

  • Problems with HP printer and PSE 11 (was bill v)

    When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

  • I want to report a bug in systemupdate313-2008-3-13.exe

    Microsoft (R) Windows Debugger  Version 6.7.0005.0 Copyright (c) Microsoft Corporation. All rights reserved. *** wait with pending attach Symbol search path is: SRV*c:\WINDOWS\symbols*http://msdl.microsoft.com/download/symbols Executable search path

  • Logical Or Between List of AttributeConditions

    Hi all! Is it possible to make a logical or between AttributeConditions in a list instead of the default and? I want to have an or condition which would result in accountType could start either with r OR m (see example below which actually never woul

  • VT04 - multiple selection variants possible?

    Hello, When we create shipments "manually" via VT01n, we have 2 different selection variants to add deliveries onto the shipments: - one variant which selects all deliveries without route schedule also those for which the goods issue date is in the f