My iPad 2 always shows "no sim installed" I have tried all options
My ipad2 shows " no sim installed" from time to time it works after restart then it comes up again after a while I don't know if it is hardware or software issue plus that I have changed my simcard & I still have the same issue can anyone help?
I'm glad to find others also experiencing the 'no sim card error' issue...
All that seems to works for me, taking from what someone said above, is flicking in/out of Flint mode ...to get it searching for networks.
Has anyone discussed this matter with Apple?
I will no doubt raise it myself, but thought pointers from another's experience will come in handy!
Regards
Similar Messages
-
i have a HP laptop, when i try to do certain things that require flash player it tells me i need to install the latest version so when i try it says its already installed. i have tried all the trouble shooting suggestions and it stll isnt working. I even checked the activex filtering and that doesn't seem to be the problem.
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
Bought a TCL Roku TV. Connection with Macbook Pro through HDMI will not show display on TV. Have tried various options with no success. Suggestions/solutions?
You could try updating your apple TV and then restarting it. Bit of a guess.
-
My iPad is not being recognised in iTunes. I have tried all the basic tests and then followed a series of uninstall instructions. One suggests deleting the following file however I cannot locate it - "com.apple.usbmuxd.plist-orig". Is there anything else I can do?
My iPad is not being recognised in iTunes. I have tried all the basic tests and then followed a series of uninstall instructions. One suggests deleting the following file however I cannot locate it - "com.apple.usbmuxd.plist-orig". Is there anything else I can do?
-
I cannot find a solution to this problem.
when i did all of the trouble shooting it still did not work
And what steps did you try? -
My iPad 3 always shows 100% battery
My iPad 3 always shows 100% battery and suddenly it gets off post complete discharge.
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
-
i can't activate my iphone using itunes after updating with ios 5.1. it shows no sim installed. what i'll do??? please! help me.
phone your network provider,and ask them to send you a new sim card.
-
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's going on? Do I have to wait to OS update? It seems lots of peolple were having issues before ML, but I as fine. Since ML, I am having all kinds of issues!
Yeah, I literally have tried everything except deleting my iCloud account (I'm close, but that would require so many changes that it is way too painful to consider at this point).
I am still waiting to hear back from Apple Support. Hopefully something can be done, or they can do a reset on their end.
Thanks for taking the time to respond though, much appreciated! -
After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
BIG QUESTION!!!!
My mini ipad has frozen and won't let me restore showing 3014 error code. I have tried all suggestions to correct error and now is frozen saying connect to itunes which just shows the error message.. Can't i just reboot it somehow?Hi annababs,
This article has troubleshooting specific for error 3014:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
If that does not work, this article may be able to help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Take care,
- Ari -
I have tried all the steps as suggested by the community partners i.e. uninstall/reinstall itunes (number of times). If I plug my ipad 2 on my office PC which has itunes, it is recognised immediately. My lap top does not show 'NEW HARDWARE FOUND" as iPad. It just says new hardware found and shows scanner and camera hardware recognised. In my opinion there could be programme file which is having conflict with ipad 2 recognisation. I am surprised to find that APPLE has not yet come out with straightforward steps for stting up procedures to avoid this recognition issue. It is waste of time and causing lot of aggravation among iPad 2 purchasers.
Sounds like it could be your computer and not Apple. Sounds like some registry issues and/or other underlying problems.
What are your computer specs? Year? Manufacturer? RAM? Processor (type & speed, # of cores), OS (32 bit? 64 bit? Professional? Standard?) -
my iphone is able to charge when i connect it to my computor, but no matter what i do, will not show up on itunes. i have tried resetting both the computer and the iphone and nothing is working.
Type "ipad not recognized in itunes" or similar into the search bar at the top of this page by "Support".
-
My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...
The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1
-
I cannot find the airplay symbol on my Ipad 2. I have tried all suggestions in te troubleshooting guide, but still no success. Please help.
Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock
Maybe you are looking for
-
IMac Stuck on White Screen with Apple Logo
Currently own: iMac 21.5" 2009 version with Snow Leopard, 4GB Ram, 500 GB Hard drive This computer was sitting in storage of my basement for 2 years because I was out of town on business. When I came home the computer worked fine. But earlier this ev
-
EPSON BX320FW does not work under OSX 10.9 via WIFI
Hi after my upgrade to 10.9 the printer started to does not work. I could see the printer, but the status is waiting. When I try to print, I see the message "Finding a printer", and it failed. Any idea?
-
I have been using iTunes happily on my various Macs for some years. This week - with nothing having changed as far as I know - I cannot import my CDs to iTunes. The CDs are recognised and I have the option to import but when I press the import button
-
Edited photos not showing in full screen
I have edited some photos (crop and/or colour adustments). Although the thumbnail is still visible, it will not load in full screen mode - I'll only see a gree square with an explanation mark. Even more annoying, a photo book I'd ordered came with gr
-
Hi - I'd like to get Synthetic Aperture set up to work in Premiere Pro - it'll save having to open clips in After Effects just to do the colour correcting, meaning that at the end of a project almost all the clips on the timeline are after effects li