My iPad 2 camera isn't opening

Well, I have been wanting to take photos and videos with my friends from my iPad2 but it seems to stay still on the shutter screen position. I can see my photos that have been taking, just fine. But taking photos and videos seem to be the problem.
Any suggestions?
Thanks

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup...  Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Similar Messages

  • My ipad 2 camera shutter doesnt open nor does the camera any one else having same issue

    My Ipad 2 camera shutter doesnt open nor does the camera .....anyone else have these issues

    Have you tried closing the Camera app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Yesterday my camera was working -- after syncing Picts to my iPad, my camera will not open. Can someone help me?

    P

    I had an update on ios and my camera works like it did.  I was fooling around and found the camera icon at the bottom of my ipod next to the "slide to unlock" bar.  If
    I slid the camera up, my camera window would open.
    Thanks alot for your advise.

  • My iPad 2 camera isn't working! (back camera)

    When I go to take a photo it goes to the front camera then when I switch to to back camera it freezes and the shutter stays closed! Is their anything I can do?

    Quit the camera app completely. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Try the camera again.
    Or ....Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My IPhone 5s camera isn't turning on, the screen is black for every app I use for the camera and none of them work. I've turned my phone off and on again and that didn't work and I also tried resettingy phone. Any suggestions on how to fix it?

    IPhone camera isn't working.

    if the camera stays black when trying to use it in any application it is likely a hardware issue at that point because the aperture on the camera isn't opening. the only way to is that is by actually having the iPhone repaired through an apple store or through contacting apple support and going through a mail in repair.
    if the iPhone is out of warranty though there would be a cost to have it repaired and it may end up being cheaper to take it to a third party to have them repair or replace just the camera.

  • My camera won't open correctly when wanting to take a photo in a text after upgrading my hardware....

    TThe camera isn't opening correctly when I want to take a picture in a text message.

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches after installing new software or apps.

  • I bought a canon EOS Rebel T5i. It came with photoshop elements 11.  PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files.  What do I need to do?

    I bought a canon EOS Rebel T5i. It came with photoshop elements 11.  PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files.  What do I need to do?

    You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
    Mac download (.dmg file) click here DNG Converter 8.4
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • IPad 2 camera shutter won't open! PLEASE HELP!

    The iPad 2 camera shutter won't open!  I restored the iPad 2 and it still won't open.  Any ideas?

    I'm having the same problem as well with my U.S. bought iPad 2.
    My problem occures when I try to switch from the back camera to the front camera, then the shutter will not open.  I've tried everything: turning off, hard reboot, reset to factory, and re-applying firmware... still nothing.
    I have not tried charging it overnight, will do and post results.
    bummer!

  • Nikon D7200 and can not open RAW files.  Error msg says camera isn't supported.  Using PSElements 12

    I recently purchased a Nikon D7200 and I can not open RAW files.  I get error messages indicating camera isn't supported.  I've downloaded RAW 9.0 but no luck.  I'm running PSElements 12.  Any suggestions?  Is the camera too new for Adobe?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    As per
    Camera Raw plug-in | Supported cameras
    D7200 needs ACR 9 and according to
    Camera Raw-compatible Adobe applications
    PSE12 supports only up to 8.5

  • TS3274 My camera won't open on my iPad

    When I touch the Camera icon on my iPad 2, the camera won't open and when Photo Booth is open, it keeps the red curtain going from left to right.

    Have you tried a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Ipad 2 Back camera does not open

    Just bought an ipad 2. the back camera does not open! can't take pictures! any suggestions?

    The only other thing I could suggest is restoring the ipad. Here is a link. http://support.apple.com/kb/HT1414 I have heard of cases where the camera was malfunctioning and they have had to replace the ipad

  • After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

    after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it?  thank you

    Hello pichastos,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • My iPod touch 5 front camera isn't working, how do I fix it?

    My I pod touch 5 front camera isn't working. How can I fix it. I have also already tried to reset it multiple times.

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?

    My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?

    Tried that and it still isn't working. Not sure if it's software thing but I just noticed when I swipe up my control center the flashlight option is not available as well. I'm not sure why this is. I have a 5s with the newest software. That's for the suggestion

  • My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    Try closing the Camera app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for

  • Error while binding values into Sdo_Dim_array

    Hi, Any body worked on binding SDO_DIM_Elements in to the SDO_DIM_Array using OCI's. I am unable to insert the values properly. I am getting 'Null" values inserted, instead of values passed in to the Sdo_Dim_Element. Can any body give clues...

  • [mount] FAT: codepage cp1252 not found

    Hello When I mount an usb memory (FAT32), accents (special non-english characters) are incorrectly read by the system (bad display when listing files for example). mount uses "cp850" for FAT32. For western european microsoft codepage (cp1252), I try

  • Shared Variable: Server Failure

    I'm binding Labview 8.2 Shared Variables to Fieldpoint channels, using OPCFieldPoint Server. The OPC Server works properly, i can connect to it using Server Explorer 2.4.1 and see all the channels (though i had to do a repair installation of Fieldpoi

  • User Tracking in LMS 3.0.1

    Hello Clark, I have read the user guide for the CM 5.0 for Tracking users and also i have read the Understanding UTLite,I can't see the users login??? what can be the possible reason i have missed. Thanks

  • Migrate php site to BC

    Hey team, We've been given an opportunity to take over the administration of an existing site but want to know what  steps we need to take to succesfully migrate the php site over to BC. It's a very basic site but it does have one form page. Thanks P