My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

Abelynn-
Does the problem occur in both Camera and Photo Booth Apps?  If you run the FaceTime App, does the front camera work?
If the front camera never works, you may have a defective iPad.  If you are near an Apple company store, the Apple Store Genius can verify the problem, and may replace it on the spot.
If the front camera works for at least one App, try rebooting the iPad.  Hold down both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  After a couple of minutes, the iPad will restart.  Rebooting will not hurt anything, and may correct your problem.
Fred

Similar Messages

  • I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

    I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

    Do you mean that you did a soft-reset ?
    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
    If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
    After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Hi i don't no if anyone can help me, i have a ipad 1 and have been trying to upgrade it to the latest version and cant find anywhere to do so? on my phone it is in the settings to upgrade, iv been online and looked but cant find any link.

    Hi i don't no if anyone can help me, i have a ipad 1 and have been trying to upgrade it to the latest version and cant find anywhere. on my phone it is in the settings to upgrade, iv been online and looked but cant find any link. can someone send me a link or direct me the right way many thanks.

    Upgrading the iOS "over-the-air" was introduced with iOS 5. If you are currently running an iOS version < 5.0 you can only update through iTunes. Connect your iPad to your PC or Mac. Open iTunes and click on "Check for updates"

  • My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..

    My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..
    I also cannot update ios..how to solve this problem..?

    Your going to have to perform a restore.

  • My Macbook is working very slow lately. it did beach balling for sometimes and that stopped when i installed OS X snow leopard on it. but the problem is still there with loading videos. XBMC takes hours to load a movie and youtube do not work as it use to

    please help me fix it. and it even takes more then two hours to download something which is just 315 mb.

    please help me fix it. and it even takes more then two hours to download something which is just 315 mb.

  • Lightroom and Photoshop stopped working when I switched from Lightroom5 to LightroomCC.

    I am getting a missing dll (MSVCR110) error.
    How do I fix this problem.

    Hi Jeffrey, kindly try the steps mentioned in the link below.
    Error: "Missing msvcp110.dll file"
    Please share the results after following the steps.
    -Atul Saini

  • ...here goes...i plugged my iphone into my computer for the first time to charge it, and walked away....when i returned it showed i had to open an account, ... my phone was charged, but the problem is it deleted all my pics and my contacts.....  is there

    i plugged my iphone into my computer for the first time to charge it and was in a hurry and walked away, when i returned the add apple i tunes account information screen was up.....
    my problem is, all my pictures got deleted from my phone, all my contacts got deleted also......weird thing is it put pictures on my phone from another phone and also txt msg from another phone......  has this ever happened to anyone else? if so,....do you know how, or where the pictures got moved to? and if they were deleted, is there a way to pull deleted pictures form a phones memory??   thank you any body that can give me any assistance....i really need it...

    It can't do that by itself. You had to click through several prompts telling it to restore it from a backup of an old phone for that to happen.
    If the phone was not backed up to iCloud before this happened, or to another computer, then the data is gone. There is no way to recover it.

  • HT5616 i have reset my email address but the old one still shows on my Ipad and I cannot access applications.

    I have reset my email address and server however when I try to load updates from the app store the old email address shows and my new passwoed does not work. PS I cant remember my old password as I reset the emial address in May

    <deleted>
    Message was edited by: Diavonex

  • I can't back up my information to iCloud and sync them to my iPad. I tried to reset the account by erasing everything in the account but the problem is still there. Can someone let me know how to delete everything in my account and start a new backup.

    Hello,
    I'm having probelms backing up my information to my iCloud account. I tried to reset the account and erase everything in my account but the problem is still there. The problem is that my iPhone is not able to complete the backup process and all it is saying a problem occured.
    Someone Pleas let me know how to reset my account, delet everyhting in the Cloud and start a new backup.
    Thanks very much,
    Dalal Tammar

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
    First check that your device is correctly connected to the wifi/internet (settings > wifi)
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
    More about iCloud v iTunes Back Up

  • HT4623 My texts have stopped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem contin

    My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem continues.

    Have you talked to your carrier (or your friend to his)?  Could be an issue at their end.

  • Photo booth doesn't work, the built in web cam stopped functioning

    hey guys
    i've just purchased macbook pro and the built in camera stopped working, when i open the photo booth application, i see a green screen, and the photo it takes is all green.
    it worked yesterday, and now it doesn't
    i've searched the entire system for a solution but couldn't find any
    if you know what to do - please please help me
    this is so depressing
    thanks in advance
    and have a great day
    Gianfranco
    macbook pro Mac OS X (10.4.10) 17"
    macbook pro   Mac OS X (10.4.10)  

    Try this
    http://docs.info.apple.com/article.html?artnum=93240
    and try a reboot.
    Best of luck.

  • I have just upgraded my ipad2 to the laters version and when I try to sinc with my laptop the laptop sees the iPad but the sinc keeps starting and the stops giving a message saying that the sinc failed to start, I have updated iTunes and same problem

    After upgrading to the new ios5 software when singing the iTunes starts sincing and it then fails it says that the sinc failed to start. I have removed iTunes rebooted reinstalled iTunes etc but the problem persists.

    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    https://discussions.apple.com/docs/DOC-3141
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • How to stop delay when streaming data from a script as URL to an Applet?

    I have a strange problem and do not know what is causing it. Hope someone here with some experience can help.
    I have a Java Applet which makes a line graph of data. The data source is to be streaming, where the first chunk of data comes from what is already in a data file, and then new data is sent whenever it is ready. The problem in brief is that if I just collect and show the data from the data file and do not stream everything works fine. If I also have the streaming and wait for a long time, everything works fine, but when the applet is first loaded, the graph is not shown until after a long delay time.
    Here is a snippet of the applet code:
             String dataendpoint = "http://phpfunction.php";
             URL url = new URL(dataendpoint);
             InputStream is = url.openStream();
             String line;
             InputStreamReader isr = new InputStreamReader(is);
             BufferedReader br = new BufferedReader(isr);
             while ((line = br.readLine()) != null) {
                   // my code here to handle each line of data which prepares it for
                   // showing on a line graph.
             } In the above, I show the dataendpoint variable hardcoded, but in reality this comes as an Applet parameter. It is a URL of a php script which is on the same server as the applet's code and there are no access problems here.
    The PHP script does the following: It first opens a data file, parses it and prints it out to its standard output using echo or printf statements. The script then enters a loop where it periodically looks to see if new data has been made available. If so, that new data is also printed out to the standard output.
    The PHP script looks like this (in pseudo code):
       // open data files, read lines, and send to standard output using echo
       // flush buffers using ob_flush() and flush() calls
       while (1) {
          sleep(30);
          // get new data, if any, then send to standard output
          // flush buffers again
       Again my problem: If I have the PHP script exit before the while loop everything works fine, my applet makes the graph immediately.
    However, if I include the while loop, then initially the applet does not appear, not until some time afterwards, and then the applet works like it should, scrolling along every time new data arrives.
    I have done a Wireshark sniff and I can see that the initial data is being sent out the the browser and applet immediately. So I do not think it is a buffering problem on the PHP side.
    I have wrapped every Applet code line with debug print statements and from the Java console I see that the Java Applet is stopping at this line:
    InputStream is = url.openStream();
    Can someone explain what is happening here? Why the delay in returning from the openStream() function and how to avoid it?
    By the way, the server is Linux and the Applet is being run on Windows Vista, and I have tried both Internet Explorer and Firefox, both give the same behavior.
    Thanks in advance!
    Steve, Denmark

    I still cannot solve this problem, but I have some more observations:
    1) yes it is a JApplet, and yes, the data streaming is performed in a separate thread.
    2) Wireshark sniffing shows that data sent out by the PHP datasource on the server is sent immediately, and is not buffered (am using ob_start(), ob_flush() and flush() alls in the PHP script).
    3) On Windows Vista, using Internet Explorer or Firefox, there is a constant 30 second delay before the Applet returns from this line: InputStream is = url.openStream();
    4) After this 30 seconds, data appears in the Applet, but it can be seen also with java console debug prints that the data seems to be buffered. The newest data shown in the Applet is not the newest data sent to the client by the PHP datasource script.
    5) On a SUSE Linux client, the Applet works as it should, there is no delay time in showing the data.
    It appears as if there is on Windows a buffering of data which I do not wish to have and which does not occur on Linux. I need to find out how to get the URL openStream() call to return immediately allowing the initial data to be read and shown on the Applet. And I need to remove the buffering of data so that the data can be shown on the Applet when it arrives.
    Can anyone help? Why does this work on Linux but not on Windows, and what can I do, at best within the Java code, to get the Applet to work on Windows as it does on Linux?
    Thanks!
    Steve, Denmark

  • I was downloading a movie on my iPad and I stopped downloading it and I want to delete it and it won't. How do you delete it in the iTunes for iPad

    I was downloading a movie on my iPad and I stopped downloading it and I want to delete it and it won't. How do you delete it in the iTunes for iPad.

    If you tap and hold down the icon - and the X does not appear on the icon - you will not be able to delete it without totally downloading it. Finish the download and then delete it.

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

Maybe you are looking for

  • Restriction on BEX gives medium description

    Hi Experts, I made a user entry variable on Info object in the bex. The variable can be changed in query navigation and has a default value. When I open the query the default value exhibit is medium description and in the selection filter value I get

  • Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. provider-hosted app sharepoint on premise

    Error occurred in deployment step 'Install app for SharePoint, ULS log as below: 0x0BA8 SharePoint Foundation          App Deployment                 acjjg Medium   The current user has System.Threading.Thread.CurrentPrincipal.Identity.Name = 0#.w|pe

  • Some clients not logging in

    Hello, We have 20 Mac clients connected wirelessly via an AirPort Extreme. We have an Xserve, and it runs Open Directory, AFP, DHCP, and Software Update. All of our clients have been working fine until recently. Some clients shake the login window wh

  • Q10 browser full screen

    Why doesn't the browser have a full screen option/shortcut? Or work in the same way scrolling in the hub is, where the bottom bar disappears when you scroll down. This helps maximize the limited screen space. Also, "flow" could be utitlized in the br

  • Sample B2B

    Hi Everyone, I am new to Oracle B2B , can anyone please help me out with a basic inbound & outbound X12 transaction. It would be great if someone could share some samples or some document on steps to be followed. Looking forward to your support. Than