My iPad 2 doesn't ring when there are incoming FaceTime calls. This problem started when I updated to iOS 8.1. IOS 8.1.1 didn't correct this problem. Any suggestions?
My iPad 2 does not ring when receiving incoming FaceTime calls since updating iOS 8.1. iOS 8.1.1 has not helped this problem. I checked the settings to make sure Restrictions were off. I cannot find anyplace that turns sound notification for FaceTime on or off.
Any suggestions?
Thank you
In spite of the fact that you said you checked the settings, I still believe that you have system sounds muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
AS for your other issues, have you done any other troubleshooting like resetting your iPad, resetting all settings or doing a complete factory reset?
Similar Messages
-
PRI channel busy issue , even when there are no active calls
Hi All ,
i using VWIC-2MFT - E1 CARD with VG. one PRI is working fine but on another PRI we are facing busy channel problem , even when there is no active calls , actually channels are not being free after disconnecting call. when we restart the gateway its startworking for some time ...
i already replaced that card .
please adviceI believe that this post should be made to the Unified Communications and Video forum.
Would please you repost to that group.
Thanks -
"Recent calls" bagde showing up when there are no missed calls
Sometimes I can see a badge with a number on the recent calls icon but there are no missed calls. Any ideas why?
Try a resest: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)
-
after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?
Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long. -
TS3367 My iPad doesn't ring, when I get a FaceTime call. How do I turn on the ringer,...???
My iPad doesn't ring, when I get a FaceTime call. How do I turn on the ringer,...???
This is very easy to resolve in 3 easy steps. goto
1. settings
2. general
3. where it says 'Use Side switch to' you will see two choices
a) Lock rotation
b) Mute
Mute will be ticked if you are not getting a ringtone when someone calls you on Facetime
Simply Click on 'Lock Rotation'
Lock Rotation will now be ticked
Mute will be unticked.
Facetime calls will now ring your iPad2 -
My iOS 6 AppStore app doesn't shown update badges when there are updates
Hi guys~
I am using iPhone5 with iOS 6.1.2 without jailbroken.
My AppStore app doesn't show any badges when there are updates available.
Anybody have the same problem?
Thank you so much!Hi, i'm having the same problem, will shut down my iphone to see if this works and check it tomorrow. However my Bluetooth was still working but I couldnt skip tracks via the buttons on my dash or steering wheel, only on my iphone.
Is there a option that allows you to skip tracks while the screen is locked, as I can't do this anymore??
Cheers
Keith -
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
A friend of mine has an iPhone with a cellular data plan, a Macbook Pro, and a mini-iPad. She's been using Facetime, but says that all of the devices used to ring at the time of an incoming Facetime call. Now only her iPhone rings. How do you set whichever device you want to ring?
James: I agree. Please keep them shorter.
The answers to both questions are no.
The iPad is NOT a computer replacement. It is a mobile device.
The iPad can not stream tro the iPhone nor an iPod.
Hope this helps.... -
IPhone 4s has yahoo mail icon permanently on safari when there are no open pages
My iPhone 4s using iOS7.0.2 has a Yahoo mail icon displaying permanently on the top of Safari when there are no open pages. The icon did not disappear even when I deleted my Yahoo mail account. The icon also has my Yahoo username displayed below it. Is there any way I can remove the Yahoo mail icon from permanently displaying on Safari? I cleared my history, cookies and data, but the Yahoo icon is still there.
I have the same issue and koban4max's sugggestion doesn't work (well, it works, but you'll need to do it once a day.) I am surprised this hasn't been widely reported either as an iphone, Verizon or Yahoo issue. I tried various suggestions (deleting/re-adding account, moving messages to a new folder and changing password on computer/iphone, etc.) It will push for a while but stop pushing in a few hours or a few days. This leads me to believe somewhere in the interface corrupts the process. I would love to know if it's unique to Verizon, iphone 4S or IOS 5, or all of the above. The phone doesn't even fetch according to schedule, only when you are in the application. BTW, the Exchange push solution for Gmail works wonderfully.
iphone 4S, IOS 5, Verizon. -
I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.
Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.
-
How to change the default JRE when there are several version of JRE in Sys
How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information -
Problem with XML Publisher report when there are no detail records.
I am working on an Oracle XML Publisher procurement report (Oracle E-Business Suite R12) that starts with a budget amount that is imported from our financial system, then lists all requisitions and orders that are in process (not approved). The amounts of all those unapproved requisitions/orders are totaled using a Sum form field, to be followed by a field where the unapproved requisition/order total is subtracted from the budget amount (amount available). I am running into a problem when there are no unapproved requisitions. When I run the report for such instances, it completes with a warning -- here is what it states in the OPP log:
oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'sum'
I have altered my sum field on the RTF template to include an if statement in case of a null value...
<?sum (EXTENDED_COST)?> <?xdofx:if sum (EXTENDED_COST) = " then 0 end if?>
...but this does not work.Hi,
You are on right track. Simply put summary field in header group and remember to set reset at property to Header Group Not Child and now you can use this field in format trigger.
Format trigger must be written on header frame.
Cheers !
Adinath Kamode -
There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox in windows. how can I solve this problem? if I use destop player like windows media player, no such error.
would you please give some solution for this error? thanks!OS is window10, Metro APP is Xbox or MultiMedia 8; any video format will occur error only by following steps:
a. Put Audio / Media / Photo files into USB thumb disk or Micro SD card.
b. Connect USB thumb disk / Micro SD Card to Platform.
c. Open 'File Explorer', click USB thumb disk.
d. Open audio file with metro app: Music. / Open Media file with metro app: Video./Open Photo file with metro app. -
After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
cursor c_mar_principle(b_entry in number, b_book in varchar2)
is
select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
from MARRIAGES mar
where mar.entry = b_entry
and mar.book = b_book
order by principle desc, id asc;
rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM := rec.surname;
:P16_FORNAME_GROOM := rec.forename;
:P16_ENTRY := rec.entry;
:P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE := rec.surname;
:P16_FORNAME_BRIDE := rec.forename;
:P16_ENTRY := rec.entry;
:P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed.
Maybe you are looking for
-
I used to be able to keep about 45 frequently used bookmarks on the bookmarks toolbar which was simply one line when I had OS 10.5.8 (Leopard). Now there are colorful icons and boxes and spaces between each bookmark and I can barely get 20 on the too
-
Problem iTunes 7.0.1 in Mac OS X
Hello, how are you. When I use iTunes 7.0.1 (last update) and play a song... just when it finishes, the %CPU (use of CPU) increases considerably up to 100% in some cases!. I think that problem is related with the Mac OS X 10.4.8. So, why is this happ
-
CCMS Operating System Alert Monitor for Filesystem
Hi, In alert monitor set for operating system, for some filesystems the freespace & percentage_used were showing zero and saying value is obsolete. But those filesystem were existing with some space used in it. How to make that particular filesystem
-
Organizing songs in separate playlists as I wish?
In iTunes, how do I organize music into several playlists so That I may choose the one I want?
-
How to add PCD iview in web page composer.
I have created an KM navigation iview for user messages.I want to add this iview in web page composer.i tried creating entry point but not able to see any changes in web page composer designer. Regards, Atul Dumbre