My iPad 2 freez / unresponsive for a second after every five second
My iPad 2 freez / unresponsive for a second after every five second.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Similar Messages
-
How can i glow a led after every five seconds
dear sir
i am using labview 7.0
i want to glow the led after every five seconds. See let us consider i start my vi at 22feb2007 at time 10:14:10. When my system time reaches to 10:14:15 at same date i want that led should glow for two seconds only. i want to continue with his loop that is led ON and OFF after every five seconds
Is it possible? If yes please help me.
falgandhaYour setup is a bit irregular, because it will be off for 5 seconds, on for two, of for three, on for two, etc.
Heres' one simple possibiility, modify as needed.
Message Edited by altenbach on 02-21-2007 09:32 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
OnOff5Sec.png 5 KB -
My macbookpro is freezing up for like one second each every five seconds
my macbookpro is freezing up for like one second each freeze and its about every five seconds, usually i'm moving the mouse and it stops and the mouse is way accross the screen in a different spot. really irritating.
New development. The computer works fine until I try to connect to my office network, which has always worked. Once that tries and fails, the freeze-every-five-seconds begins to happen and won't go away. Again, this connection worked perfectly until last night (around the time I did the latest software update ... I believe it was an iLife Quicktime patch).
Can I uninstall that? -
Firefox is locking up VERY frequently after every few seconds unless I minimize the window and maximize it again. But then in a few seconds it locks up again, I am unable to click anything or DO anything and it is becoming extremely annoying! Ya'll just released a new version that I'd hoped would have fixed this issue, apparently not...and I also can't select an option in a drop down box, I have to use my keyboard to do so...
== This happened ==
Every time Firefox openedYeah I'm seeing this as well. A force quit and relaunch seems to solve the problem for a while.
IMHO the app has just gone downhill in the last few years. Useful tools like browser history from the back button are hidden / rendered useless (click and hold doesn't work so well from a track pad), and it's performance just isn't what it used to be. -
Help! iPad screen dead, bleeping every five seconds when charging
Hope someone can help - but I fear not!
My iPad3 was working fine until picked it up one morning and nothing - no screen, no reaction to a standard reset.
BUT - when plugged in it makes a low beeping noise about every five seconds. iTunes recognises it when I plug it in to my computer, so it's THERE, but I can't see anything.
I have backed it up and restored it (twice). I have tried attaching to the USB whilst the home button is depressed. This gave me the 'welcome to your new iPad' screen in iTunes - but still nothing on the iPad.
Any ideas!?!Thanks mende1.
>> Boot your Mac in safe mode (press Shift key during boot) and check if it happens
I tried booting in safe mode and tried using MAC for 15-20 minutes. It didn't happen in safe mode.
Can you think of what can be the real issue and also what could be the solution? -
How to search for BT device automatically every x seconds?
I have a Trust BT-2100p which came with the Toshiba Bluetooth software.
I can connect my Bluetooth remote control to my HTPC, but when I disconnect and want to reconnect again, I have to right click on the device, press "connect" and then "OK" in the popup window before it starts searching.
The whole point with the remote is that I don't need a keyboard or a mouse.
I can make a simple .bat-file that starts the connection automatically every x seconds, but it can't press the "OK" button.
Is there a way to make it search for the device automatically every x seconds?HID devices are automatically connected as soon as a button was pressed on it. I checked the internet regarding your WII devices. The problem in your case is that this devices supports a none standard function which must be configured first in oder to reconnect by HID automatically. So this has to be done by the software which you mentioned. It has to configure the controller which should be used. This device support 4 of it.
-
my ipad streaming purchased video from itunes stops every few seconds. This does not happen with any other streaming video service. I have restarted and rebooted already.
I've tried both things, but video still stutters.. Have also tried removing profile, and complete reinstall of firefox.
I'm on 24 Mbit cable and the only user atm. IE and Chrome seems to work without stuttering.
I've having this stuttering every ~5th second, like a small "1/4 sec buffering". -
I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Has Lion problems with this?
Ulf, SwedenUse the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
All of the movies that we watch on I tunes have intermittent interruptions to the audio. It's like a one second blank every 20 seconds and we miss what is being said. This is independent of which movie is playing. We are on Shaw and have purchased their best modem and registered for the higher speed option. Our Apple TV receiver is hard wired back to our network hub and the hub is working correctly. There is no problem with the video. What could be causing this problem?
I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/ -
Screen goes blue every five seconds. Unable to reinstall OS.
Hi,
I am facing weird problem of screeing going BLUE every five second. I tried checking Hardware using hardware test DVD and it found no issues. Additionally, I verified both the partitions along with permissions verification using DiskUtility. But, the problem is not going. Finally, when i tried to reinstall the OS by inserting Mac OS X Install DVD and pressing 'C', the DVD is being rejected. Could someone please help me here?
Here are some specifications:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Mac OS X Version : 10.6.8
Processor : 2.26GHz Intel core 2 Dio
Memory : 2GB 1067 MHz DDR3
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Chipset Model: NVIDIA GeForce 9400M
Type: GPU
Bus: PCI
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Regards.Thanks mende1.
>> Boot your Mac in safe mode (press Shift key during boot) and check if it happens
I tried booting in safe mode and tried using MAC for 15-20 minutes. It didn't happen in safe mode.
Can you think of what can be the real issue and also what could be the solution? -
Our Ipad type line for text disappears after taking a photo to send and only after a restart
Hello. We have two Ipads and two Iphones. Our newest Ipad has an issue with I message. If we take a photo to send by text the type screen and line disappears. The only way to get it back is to shut the device and then the type line returns. We have turned the message off on on with the same result. Our Ipad 2 and both our 4s and 5 phones don't seem to have the issue. Any thoughts? We are also did the icloud update and no change happened. Is this a bug or are we missing something? Messaging works fine until we take a picture then the type bar and keyboard disappear. The taken photo goes to photos.. The only way to get messages to work is to shut off the device and then it works until we try to add another new picture. It seems to work if we use an existing photo from the library.
This sounds like you may have the camera's "Image Review" option set to "hold".
When you take a photo, two things normally happen.
1) The camera should write the image to your memory card. You'll know when it's writing to your memeory card because there is a red LED ligth which is active when the camera is using the card. When the light goes out, the camera is finished.
2) The camera can be set to do "Image Review". By default, when you take an exposure, the camera will display the image on the rear screen for just a few seconds. But this behavior can be customized.
Your choices for image review are "Off", 2 seconds, 4 seconds, 8 seconds, or "Hold". If Off is selected you wont get any image review. If "Hold" is selected, the image you just took will appear on the rear LCD and will never go away until you manually clear it. You can just do a half-press of the shutter button to clear it (it wont get in the way of you taking more shots... just ignore it.)
You can find instructions on this on page 166 of your T3i Instruction Manual which describes how to change this setting.
Tim Campbell
5D II, 5D III, 60Da -
MacBook Retina shuts down after a few seconds after every boot
Hi there
My retina macbook keeps shutting down after booting and rebooting by its own a minute later. No error message is displayed or anything like it, it just magically shuts down.
It had been working fine until now but it seems to be going crazy for whatever reason...
When it shuts down by itself, I can't turn it on myself. It does it on its own even if the lid is closed and then shuts down again after about 30 seconds.
This only happens when it's connected to a power source (it doesn't even start when it's not).
I have tried to reset the PRAM without success.
The only time the issue doesn't happen is when I do a Safe Boot.
Can anybody tell me what is up with my Macbook (I really need it for work AND school).
ThanksHave you done a SMC reset?
http://support.apple.com/en-us/HT201295
Run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Download and post an EtreCheck report:
http://www.etresoft.com/etrecheck
Ciao. -
IPod unresponsive, screen frozen but flashes every ten seconds
My iPod appears to be frozen and does not respond to charging, toggling the hold switch, or resetting (holding down the menu and center button). The screen is dark except every ten seconds it flashes bright white. It has been doing this for several hours now, although the flashing has slowed from every 2 seconds to 10 now. However, when I connect the iPod to my computer, the screen does respond - it's now a shade of dark gray and the iPod emits a loud buzzing noise. Besides this, nothing else happens and neither my computer nor iTunes recognizes the device. Please help!
I had the same problem. I FIXED IT!!!
Take your ipod apart. There are instructions at various sites. Be careful because there are ribbon wires that are very fragile.
Disconnect the battery. Leave it sit for 2 days.
I dont know if it has to drain a charge being held by the drive or what, but after 2 days, plug the battery back in. It should be totally dead. Plug the ipod into the wall or your computer, it will say "ipod battery very low, please wait". once it builds up a decent charge, it will reset.
I hope this works for you guys, I almost smashed the thing before trying this. -
I have a sony Bravia, and am trying to stream netflix through my iPad. have the AV and HDMI hooked up, but only getting flashes of pic every few seconds....no picture while movie is playing on netflix...???
The poster said: AV and HDMI
bhazel wrote:
what cord are you using to connect with your tv -
Display random mysql record after every 8 seconds???
Looking to see if I could get some suggestions on how to
achieve the following. I want to display the contents of random
mysql records every 8 seconds but I am not sure how to code the
every 8 seconds.
Any suggestions?cdembek wrote:
> Looking to see if I could get some suggestions on how to
achieve the following.
> I want to display the contents of random mysql records
every 8 seconds but I am
> not sure how to code the every 8 seconds.
Apart from the fact that running a MySQL query every 8
seconds is likely
to use a lot of resources and probably result in an intensely
annoying
web page, you are attempting something for which server-side
programming
is not designed. A dynamic page using PHP (or any other
server-side
language) is created by sending a request from the browser to
the
server, where it queries the database, and sends back the
result. So, to
do what you want, you need to send a new request every 8
seconds.
The only way to guarantee that it will work is to send a
request for the
full page, using the refresh meta tag. This is extremely
wasteful of
resources, and is likely to drive visitors mad, as the page
rebuilds
seven times a minute. To rebuild just the part of the page
that you want
to change, you would need to use Ajax or Flash.
A more sensible approach might be to send one query to the
database, and
store a large number of results in an array. You could then
use
JavaScript and DOM manipulation to select an element from the
array at
random. However, like Ajax, this approach depends on
JavaScript being
enabled in the browser. You would also need considerable
scripting
skills to set it up.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Maybe you are looking for
-
3 problems: 1) I can't buy anything online. Firefox has a popup that states that all payment sites (Amazon, paypal, etc.) are forbidden and tries to protected me from them and blocks me (will not let me bypass the block). 2) Once I figure a work arou
-
Error while compiling and building file [java] ERROR: ejbc couldn't invoke
*[java] [EJBCompiler] : Compliance Checker said bean was compliant* *[java] ERROR: Error from ejbc: Access is denied* *[java] java.io.IOException: Access is denied* *[java] at java.io.WinNTFileSystem.createFileExclusively(Ljava.lang.Stri* ng;)Z(Nativ
-
HP C309a All in one Printer - Problems with printing documents the correct size.
Hi I recently purchased an HP 309a as a replacement for an EPSON printer which had to be replaced a couple of times so I thought I would change manufacturer. The HP printer prints well in post places but when I print from Excel on an A4 scale it only
-
UWC empty trash button missing
Hello. One of my users can't see the "empty trash" button in his "manage folders" menu. I've checked that he has messages in the trash folder. His quota is 95% full but as far as I know it has nothing to do with the problem. Thank you very much.
-
VNC: How can I share only one desktop screen on mac os when I created multi desktop?
I created multi desktop, and opened different applications on each desktop. I'd like to allow a user to access to only secondary desktop not main screen. How can I allow VNC user to access only to specific desktop?