My iPad 2 has frozen - it will only show the Apple logo. Any help?

My Ipad 2 has frozen andjs shows the Apple lgog. Ant thoughts?

Hold down the on/off  and the home button for about 30 sec, if should restart.

Similar Messages

  • Will only show the apple logo thats it I can do noithing else

    my ipod only shows the apple logo and willl not do anything else how do i fix it?

    Try to Reset your device. 
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • Ipod has shut off and only shows the apple logo and the loading screen for the past day

    I was downloading a song from one of the ipod apps for illegal songs and it just stoped downloading so i restarted my ipod and it would turn back on but if i would try to go back into the app it would only push me out of it. so after restarting it a coupld more times just with the ipod it has resulted in not turning back on and remaining on the apple logo screen then to the loading screen. it wont turn on at all. i have charged it (or tried) for a whole night but the whole night it has remained on the two screen. i cant plus it into my computer because then i will lose all my music. i dont know what to do.?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    You will very very likely lose the contents on the iPod. That is the way it is .

  • My phone went blank and now will only show the apple logo I have tried to reset it and that doesnt work HELP!!!!

    My iPhone is frozen. It was working find about a hour ago and then for no reason the screen went to the apple logo. I have tried to reset it and that doesnt work. When I press the power/lock button and the center key it turns off but then it comes right back to the apple logo screen and wont go any further. Please help I dont have my stuff saved and would like to keep the stuff i do have on it!!! Every once in awhile the screen will go black for a few seconds then the apple logo pops right back up! I dont know what to do.....

    Try to set it up as new device, explained here:
    How to back up your data and set up as a new device
    First without using the backup, in case it contains corrupt data.
    If it works after that, use the backup to restore from.

  • Dropped my iPhone in snow and now it will only show the apple logo when plugged in

    I dropped my iPhone4s in the snow the other day, consequently it got wet. I could see the condensation in the camea and flash and the screen turned black however the phone still worked as when my friend called me it vibrated but I couldn't answer it because of the screen. The flash also was constantly on so it seemed like everything was working inside the phone but just not the screen.
    As soon as I got home I left the phone in rice for 2 days.
    I got the phone out and plugged it in to charge. The apple logo showed up and the phone vibrated but en the apple logo disappeared and the screen turned black again. I unplugged the phone and plugged it in again and the same thing happened with the logo again but no vibration.
    If I take the phone out of the plug it will just stay as a black screen.
    Any suggestions as to what is ring with it or what I could do to fix this?

    You've most likely cooked it. Make an appointment at the genius bar. Take the phone and your credit card with you. An out of warranty replacement will cost you $199.

  • Ipod only showing the apple logo and will not do anything else. 1st GEN

    my ipod will only show the apple logo when plugged in to my computer i have a dell running xp but i have tried other computers and it will not do anything but show this symbol. my computer does not recognise that it is plugged in. ive tried the apple support fix-it but it does not do anything period. the buttons do not work when plugged in or not. the only thing it does is light up when plugged in. my other ipod works perfectly no problems so this leads me to believe that its not the computers i have used. just think the ipod has had it

    Mine did the same thing last week after trying to update it via wi-fi. I then spent 11 hours Sunday updating my itunes on the laptop then restoring my ipod. Now all it does is beep as if it is just plugged in and flash the white apple logo. It beeps constantly. My computer at first didn't recognize it, then it did but said I needed to unlock it,(since I can't get the home screen up, I can't.) and now it doesn't recognize it at all. I've tried both computers.

  • While updating software of Ipad, it stop working and only shows the Apple on screen. How can I recover?

    While I was updating the software of my IPad, it stopped working and only shows the apple logo. How can I recover my IPad?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT1459 Myipod touch has frozen! Will only show a USB cord pointing to "itunes" CD symbol. Computer says my device has malfunctioned. Tried to reset, but didnt help

    My ipod touch has frozen!  Will only show a USB cord pointing to "itunes" CD symbol.  When I try to plug it in, my computer says that it cannot recognize my device due to malfunction. Tried to reset the ipod twice, but didnt change anything.

    - Try another cable as yu siad
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • How to fix a frozen ipod touch, it only shows the apple logo?

    How do you fix  a frozen ipod touch, it only shows the apple logo?

    Hello,
    I have same broken iPod Touch 4G, I'm stuck on the Apple logo and only what I can do is just restart. If I connect iPod turns on but that's all. I checked a lot of tricks how to restart/reboot device and how to get DFU but I have only the logo. iTunes on my mac can't recognize the device.
    And in Apple retail store the guy told me: sorry it's dead. We can fix for about £200. After 1 month when my waranty is finished. Funny isn't it? I can't believe that my lovely iPod is dead after 13 months. Where is the "for quality you have to pay." Is it conspiracy if you don't buy extra waranty we will send you killing signal into your iDevice?
    Many thanks for help

  • HT201210 the screen on my ipod touch will only show the apple icon it will not turn all the way on

    the screen on my ipod touch only shows the apple logo.it will not shut off or turn all the way on and when plugged into itunes it will not allow the newest update

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPad air would not start.  Only show the apple logo then no reaction after that.

    My iPad air would not start.  Only show the apple logo then no reaction after that.  This is already the 2nd time.  Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem.  It happened less then 30 days and same problem again.  Can someone please send me the hard-reset step so I can try myself before I send back to the service center again?  thanks

    Here's the hard reset info:
    http://www.hard-reset.com/apple-ipad-hard-reset.html
    Post something about what happened with your visit.

  • Nano frozen. only shows the apple logo

    my nano seems to be frozen. it only shows the apple logo. ive tried to reset it a couple of times but its still the same. the apple logo still appears and its still frozen. sometimes if i wait a while the screen lights up but its still the apple logo that it displays. the only difference is that the backlight is on. please help me solve this!!!

    Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651

  • I can no longer see my iphone on my computer. the ipone is gone blank only showing the apple logo

    my iphone no longer shows up on my computer, the iphone screen has gone blank only showing the Apple logo. I am unable to make and receive calls. Can someone help me with this problem please?

    Your iphone is shown at the top of the page.
    You can also simply click View>Show Sidebar and it will look about the same as it did before.

  • Iphone 3G only will only flash the Apple logo and do nothing else. HELP

    My phone started acting up yesterday and then it started only showing the apple logo. It flashes off and on. I plugged it in the computer and it stopped when plugged in. I then downloaded the new software and it still does the same thing. Any help or information you can give will be greatly appreciated. I bought the phone overseas so I doubt I can get official support here in the USA. I just moved back to the USA from Singapore.

    See if you can force the phone into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • My iPad constantly turns off and restarts, showing the apple logo on the screen. How do I fix this?

    My iPad constantly shuts down, then restarts showing the apple logo. This happens over and over. I have tries resetting and restarting. What to do next?

    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
    How to back up and restore (iCloud and iTunes) 
    http://support.apple.com/kb/HT1766

Maybe you are looking for

  • To get f4 search help in Abap Web dynpro

    Hi web Dynpro Experts, i want to achieve XK03 Tcode payment mode search help functionality  in abap webdynpro,in clearly When i press f4 i payment mode input field a view should open with  different payment modes like a.ebanking payment method, b.eba

  • 'Value of valuated stock that has been issued' is different in MCBE and S031

    Hello, I noted that the field  'Value of valuated stock that has been issued' is different in the same period (07.2013) in table S031 and in the transaction MCBE. Also, if the 'Quantity of valuated stock issues' for this period is 0, how can this fie

  • Use of trading partner field in GL Master, Vendor and Customer Master

    Can anybody explain in detail  what is the use of trading partner in masters. In GL Master, whether it needs to be updated for all the GLs or only a specific GLs.

  • Problem in JScrollpane

    Hi My GUI comprises of the following : JAPplet => Bean =>( JScrollPane => JTable and some buttons) I'm loading the table with some data . It has 4 columns and n rows with the rows increasing by the data loaded. I made the last 2 columns hidden. Now,

  • Java and WM's

    I am having a problem with both XFCE and Gnome2 or 3 not properly focusing modal input dialogs.  So I have a program MapTool that has macros that display input dialogs where I can input data.  In windows or KDE (it used to, but haven't used KDE in a