My iPad 2 is disabled. I know the passcode and apple id. How do I enable it?

My iPad 2 16Gb has been disabled because the wrong passcode was entered too many times. Since purchasing the iPad I never purchased anything from the Apple Store and after a couple years my passcode got misplaced.
A friend of mine in the church where I attend tried to help me and went to iTunes, erased the iPad and downloaded the new software. When it was time to activate the iPad, it demanded my apple id and original passcode at the time of purchase.
I searched and found it in my wallet but the last three characters were uncertain. The salesman used an "up-arrow r" for "R" and counted it as two characters; so the passcode only had 7 characters instead of 8. I thought the up-arrow was a "p" and it could have been capital or common. Then the "r" might have been a "k" because the way I wrote it. After many combinations, I ran out of tries and the iPad was disabled. Eventually I realized it was a "R" but too late.
I visited the Apple Support in my country and they were unable to do anything about it even though I had the right apple id and passcode. The security questions were the problem.
The first security question was my birth date and I was getting that wrong. Why, I don't know. How could I get that wrong. Not even my wife's birth date works. I began to question whether the salesman went through any security questions with us at all.
How do I enable the iPad knowing my apple id and passcode at the time of purchase?

You're facing Find My iPhone Activation Lock, and you will not be able to use you're iPad without knowing the Apple ID and Password used to originally activate it. If you don't remember your password, try: https://iforgot.apple.com/password/verify/appleid

Similar Messages

  • HT1414 how do i get into my ipad if i do not know the passcode and i dont want to erase everything on my ipad please help

    how do i get into my ipad if i do not know passcode and i dont want to erase the data i have on it

    Hello Mariemonkey82
    Follow the steps in the article below to put your iPad into recovery-mode so that iTunes can restore it.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Regards,
    -Norm G.

  • My ipad is disabled and says connect to itunes. I dont know the passcode and I dont have access to a computer , can I restore it without connecting to itunes

    My ipad is disabled, I dont know the passcode and I dont have a computer to connect to itunes... is there anyway of reactivating ipad without connecting to itunes?

    Sorry but no. You will need to get access to a computer with iTunes somewhere to restore the iPad. You can get help with this at an Apple Store if you have them in your area. Note that if you haven't backed up your iPad to iCloud, you'll lose all your data. Apps and other purchases from the iTunes Store can probably be re-downloaded.
    Regards.

  • My friend gave me her ipod about 2 years ago. neither of us know the passcode and now we have no way to link it to the original itunes account. is there a way i can reset it so i can use it?

    my friend gave me her ipod about 2 years ago. neither of us know the passcode and now we have no way to link it to the original itunes account. is there a way i can reset it so i can use it?
    I have tried plugging it in and holding the sleep/wake button and home button at same time and all it does is gives me the "slide to power off" option. Is there anything I can do??? Please Help!
    Message was edited by: Unordinary92

    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Or try using this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • How do i reset an iPad to factory settings without knowing the passcode?

    We laid off an employee but don't have his passcode to reset the ipad to it's factory settings.  Is there anyway I can do this?  I tried following the directions I found:
    If you don’t know the passcode to go into the ipad and reset it, you simply need to connect the iPad to iTunes.
    Connect your iPad to the USB port on your computer, open iTunes and on the left side of the panel will appear a category for Devices... select the iPad. The summary window will have the information on the iPad and below that the choice for Restore. Select Restore, and you will have to do some confirming usually, and the system will go to work restoring the iPad to the factory settings.
    But it says it won't connect to iTunes until I enter the passcode:  "iTunes could not connect to the iPad ****** because it is locked with a passcode.  You must enter your passcode on the iPad before it can be used with iTunes."
    Any ideas?
    Marcine

    Put the iPad into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If that still doesn't work, as a last resort try DFU mode:
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/
    Regards.

  • HT1212 my ipod is disabled, but i DO know the passcode. and iv never connected it to a computer or anything. how do i fix this?

    and i dont have a computer to downlaod itunes.

    Disabled
    Without iTunes:
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    With iTunes
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HT1212 I took the passcode lock off of my iPhone 5 and now I can't get on to my iPad. It is asking for the passcode and when I use the one that was set up it locks me out. How can I get past this?

    I have the iPhone 5 and with the new sofware update it added a passcode lock. Same for the iPad. I removed the passcode lock from my iPhone and now I can access my iPad. It is still asking for the four digit passcode. I tried using the one that was orgingally programed and it disables it every time. How can I get past this? I have tried to do a restore and it still takes me back to the lock screen. Please help!

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • HT1212 trying to restore ipod but the power button is stuck and i'm unable to turn it off. I don't know the passcode and it says to connect to itunes. what do i do

    I tried following the directions that I received about restoring my iPod touch. But there is one flaw. My power button is stuck and I am unable to turn it off. How can I go about either getting it fixed or restoring my iPod?

    Easy, first make sure that the itunes on your computer is up to date. Next connect the ipod to your computer. If you have itunes 11.0 or above, wait until the device appears in the upper right hand side of the screen, or you can press ctrl-s, and the side menu will appear, and you can see more clearly the ipod appearing under the device category. Next simply click on the ipod and on the summary screen, you should see restore. Press restore, and you will see a dialog box asking to back-up & restore, restore only, or cancel. If you have information to save, press back-up & restore, if you want to wipe the device clean and start over, press restore. Once it's all done, you should be good.
    If your ipod is less than a year old and not a refurbished device, contact Apple at 800-676-2775 for assistance on repair and replace. If you are near an Apple Store, go to http://www.apple.com/retail/ and find your local Apple Store and set-up a genius appointment and go in and have your device repaired or replaced.If your ipod is a refurbished device, it has to be 90 days old or less to be repaired or replaced for free.I hope this helps.

  • Trying to restore my ipad 2 during the restore process it is asking for a passcode and i dont know the passcode

    My IPad 2 is locked with a passcode when I try to restore the ipad  halfway through the restore process it is asking for a passcode I do not know the passcode and the IPad was never synced to a computer. Please help

    Instructions can be found here.
    http://support.apple.com/kb/ht1212
    Make sure that you pay attention to the section at the very of the article that talks about having never synced your iPad with iTunes. You may need have to restore the iPad that way.

  • Does anyone out there know the meaning and history of the APPLE logo?

    I am doing a paper on Apple Corporation and I called to ask them and a lady at corporate said "we dont comment on things like that". I asked if the meaning was secret and she said, "no we are a forward moving company and we dont talk about stufff like that." unquote.
    I wanted to know the origin and meaning of how Steve Jobs or whoever picked an apple as the logo and why there is a bite out of the apple on the right side.
    Anyone out there be so kind as to answer this iof you know--or care to venture a guess??? Jeff

    The name "Apple Computer"
    A lot of people wonder where the name "Apple Computer" came from, as it is a rather unusal name for a computer company.
    Steve Jobs came up with the name in early 1976. At the time, he was often visiting and working on a small farm friends of his owned. It was a hippie commune where Steve spent a few months of the year.
    When he returned from one of those stays, he told Steve Wozniak about his idea. Jobs probably was working on apple plantages. Or he just wanted their startup to be in front of Atari in the phone book. Or it was a tribute to Apple Records, the music label of the Beatles.
    Whatever the true origin of the name was, Woz knew instantly that they were going to be in trouble with Apple Records sooner or later. But as they were unable find a name that sounded better than Apple Computer, the name was chosen.
    Woz's worries turned out to be justified. Apple Computer, Inc. was sued by Apple Records over trademark violations in 1989. (for more on this see below)
    The Apple logo
    The first Apple logo was designed by Ron Wayne, co-founder of Apple Computer. It was rather a picture than a logo. It showed Sir Isaac Newton sitting beneath the famous Apple tree thinking about gravity.
    It was only used for the Apple I. Steve Jobs felt that it was too intellectual and it was almost impossible to put on computers as one could only recognize the details of the drawing when it was large enough.
    Therefore, in 1977 Jobs asked the art designer Rob Janoff to design the new Apple logo. The new logo had a simple shape of an Apple, bitten into, with the colors of the rainbow in the wrong order. The bite symbolized knowlegde (in the bible the apple was the fruit of the tree of knowledge) and the bite could also be pronounced "byte", a reference to computer technology.
    When Jean Louis Gassée was asked about his thoughts to the Apple logo he answered: "One of the deep mysteries to me is our logo, the symbol of **** and knowledge, bitten into, all crossed with the colors of the rainbow in the wrong order. You couldn't dream of a more appropriate logo: ****, knowledge, hope, and anarchy."
    In 1997, Steve Jobs decided to drop the multi-colored Apple logo and replace it by a solid-colored logo. The first Apple computers to feature the new logo were the new PowerBook G3s in 1998 (although they still featured both types of logos).
    kEat0n

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Ipad is disabled, connect to itunes. know the passcode but ipad is not synced so i lose data if restore it. can you help me to save the data. thanks

    ipad is disabled, connect to itunes. know the passcode but ipad is not synced so i lose data if restore it. can you help me to save the data. thanks

    You're going to have to get that info about his iTunes account if it's on iOS 7. Does it at least show the username it needs?

  • I was given my ipad mini as a gift and i cant restore it  dont know the previous owners information? how do i fix it

    i was given my ipad mini as a gift and i cant restore it  dont know the previous owners information? how do i fix it? i have tried everything on this wesite , forumas and in i tunes. i have restored it wiped it an di cant get thru set up because of the previous persons email linked to it.

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Am I able to unlock my disabled phone if I don't know the passcode?

    Am I able to unblock my disabled phone if I don't know the passcode?

    If you have disabled your iPhone you will have to reset it to factory settings, and then restore your latest backup. If you haven't backed up your iPhone recently make sure to do so by connecting it to iTunes.
    More details here: Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • MY IPAD IS DIABLED BUT I KNOW THE PASSWORD

    hello my name is mohammed
    i have a problem my littel sister dont know the password and she was writting again  and again the wrong pass word and now it disabled and needs to go to the i tunes to unlock it but it is going to erase every thing please help i still remembere the passwod

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • Gateway could not be started

    Hello Expert, Could you please let me know what things needs to be taken care for getting the gateway on track. My dev_disp look trc file: "dev_disp", trc level: 1, release: "700" sysno      10 sid        IDF systemid   562 (PC with Windows NT) relno

  • OID External Authentication issue

    Hi.. I have configured synchronization profile to import users from TDS to OID using DIP but it does not work as change log is not enabled on TDS side. Now i have configured External Authentication Plugin and i craeted same users in in TDS and also i

  • Mac OS Combo 10.5.7 Update dated 7/10/09

    In May, I downloaded the Mac OS 10.5.7 Combo Update. Today I noticed that there is a new Combo Update dated 7/10/09 that is labeled as the 10.5.7 Combo Update? Is this correct or is this latest update really the 10.5.8 update but with a wrong descrip

  • "ApShell_BPU" database in Microsoft Analysis Services

    In the BPC 5.1 Sinlge server install i am not seeing "ApShell_BPU" database in Microsoft Analysis Services, what can be the reason? Have i missed something? Please reply me back. Thanks and regards Abhay

  • Calling Portal page by name with TABs

    I know how to access a URL directly. pls/portal/url/page/page name How do I direct it to a specific Tab? Same question if there are multiple levels of Tabs on the Page.