My Ipad 2 is not charging or connecting to the pc after updating it to IOS 6.1.3

My Ipad 2 is not charging or connecting to the pc after updating it to IOS 6.1.3, what shall I do ?

Try This...
Close All Open Apps...  Perform a Reset... Try again...
Reset  ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Similar Messages

  • HT1719 my ipod shuffle 4th generation will not charge or connect to the computer, I updated iTunes and I got a new charger.

    My iPod Shuffle will not charge or connect to the computer. I updated iTunes and bought a new charger. Any ideas? Thanks

    My question was, when you connect the shuffle to USB, does the light come ON?  From the way you answered, I'm not sure if you are answering that question, or saying that the light does not come ON when you move the power switch on the shuffle to the ON position.
    Also, what happens when you connect the shuffle to your computer by itself, with nothing else connected to USB?
    If you get no response (no light) from the shuffle when you connect it to USB by itself, trying both the original USB cable and a new one that is compatible with the 4th gen shuffle, try connecting something else to the USB port to confirm it is working properly.  It would be best to test the USB port with something similar, such as a USB flash drive or external drive.  If you can confirm the USB port works properly, it is likely that the cause for this problem is on the shuffle, such as a faulty headphones jack or bad logic board.
    If the shuffle is less than one year from purchase date, it is under warranty.

  • My ipod is not charging or connecting to the computer. .

    my ipod is not charging or conecting to the computer. i reset the ipod and network settings and it still wont charge no matter what. it wont even connect to the computer. HELP

    Not Charge
    - See:     
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    Also
    See
    iOS: Device not recognized in iTunes for Windows

  • My iPad loses it's ability to connect to the internet after awaking from sleep mode. Needs to be rebooted to reconnect.

    My iPad loses it's ability to reconnect to the wifi after sleep mode often times, but not always. It is very annoying because it requires a reboot to reconnect. It is running the latest iOS software update. I have also reset network settings to the factory defaults. My wifi is working fine, and all other devices in my house have no issues at all.

    Well, I think I have finally come up with a solution. It seems this issue happens when it auto locks. I turned auto lock to "never" in settings, and the issue has not happened since. Seems there may be a bug in this feature???
    I now use manual lock, and upon awakening the wifi is now fully working.

  • My iPad 2 won't charge when connected to the wall plug

    I have plugged my iPad into many different USB cords and it will not charge. It charged fine a few days ago and I also plugged it in to different walls ports too.

    Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Bluetooth devices not finding or connecting to iPhone 5 after update to iOS 6.1.3?

    Is anyone else having this problem? This is also happening on my ipad 4th gen. Anyone have a solution for this? It is very frustrating!

    I figured it out. On the device(s) that I was trying to connect there is a function on the device that makes it discoverable by your iPhone/iPad. Some devices have an actual button that is labeled "connect" on the bottom or in an inconspicuous place on the device. Others can activate this function by long holding the action button (like that on a Bluetooth headset) for 5+ seconds until the device goes into "discover" mode. Then your iPhone/iPad should be able to find the device and you can connect. If this does not work sometimes hard resetting the actual Bluetooth device will fix the problem. You will have to research your specific device as each one has a different sequence to accomplish this. I hope this helps!

  • No longer can connect to the internet after updating to 10.4.10 for Intel

    I (fortunately) use a cloning program (SuperDuper) to clone my MacBook Pro hard drive now and then on to an external Firewire hard drive... I say "fortunately" because after reading some of the problems folks were having with this most recent OS X update (10.4.10) I chose to update the cloned hard drive first before installing the update on the main drive... On or about 6/20 an update came out (that I can't find anymore so maybe they pulled it??) that was called "MacOSXUpd10.4.10IntelPatch.pkg". First I installed that update on my cloned drive... It booted and worked fine except that when I would try to communicate with the internet wirelessly, I could not... I didn't try a "wired" connection because I am not interested in connecting that way. The system would claim to connect to my wireless router (NetGear WGU624) but pages would time out before loading... Next I tried installing the newer (7/02) Combo package called "MacOSXUpdCombo10.4.10Intel.pkg" but that improved nothing. Still no useable wireless internet connection... So in no way will I be putting this 10.4.10 update (Patch or Combo) on my main drive until something gets fixed... In fact, I went ahead and overwrote what I had on the firewire drive by recloning my main drive (running under 10.4.9) to that firewire drive again... Once I got 10.4.9 reinstalled on that firewire drive, it again connected to the internet just fine... So my experience is that there is something not happy about either the Patch or the Combo updates for 10.4.10, at least as it relates to my Intel system... I also have a G4 PPC and on that machine, the PPC version of the 10.4.10 update worked just fine (though that is a wired connection, if that matters)... Anything I am missing or can someone offer other input other than not to upgrade at this time??? Thanks... Bob...
    FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro   Mac OS X (10.4.9)  

    Hello Robert:
    I infer from your post that you selected the updates to install, rather than using software update (IMHO a bad idea). At the moment, as I understand your post, your backup is not working properly and your internal HD has not been changed.
    I suggest this:
    Clone your HD to your external firewire drive (new copy, not an update of changed data.
    Then you have a clone in case someting goes wrong.
    Update your HD using software update. If everything is running well after that, you are OK. If not, you can restore your HD from the clone.
    The reason I favor using software update is that the system selects the proper software. When Apple releases updates, there are several versions available.
    If you know all this, forgive the explanation - I do not know your level of computer expertise.
    As an aside, there is nothing (that I am aware of) organically wrong with the OS X 10.4.10 update. Apple did release a 10.4.10 v1. update for the Intel boxes (I do not run Intel-based Macs, so I have not investigated it):
    http://www.apple.com/support/downloads/macosx10410updatev11intel.html
    Barry

  • My ipad air will not charge when connected to any outlet with its own cable and plug.

    I had this Ipad Air since March 2014 and always kept it updated and charged, but since three days ago it does not seems to like its own charging cable and plug that came with it. I tried different outlets and other cords and plugs. I closed and restarted it, but no result. Now it is off because of no battery power. What can it be?

    Try the following:
    Option 1
    1. Settings>Airplane Mode>ON
    2. Turn the iPad OFF
    3. Leave unit off for about 20 seconds. 
    4. Turn the iPad back on and it should now show "charging"
    5. Turn Aeroplane Mode OFF
    Option 2
    Reset iPad and when the apple logo shows up, plug in the charger.

  • My iPad (original) no longer connects to the internet after update to ios 5.  Are there any solutions to this issue?

    Has anyone found a successful method to connect?  This is not a router issue as other devices, including another iPad not updated to ios 5 connects just fine.  I am getting frustrated

    I had this problem.  I held down the power switch to power down completely.  Takes a few seconds.  Then use the power switch to turn on.  Might take a couple goes.
    Kirk

  • IPhone 4S not able to make or receive calls after updating software to iOS 7, please help!

    I can call people but the line doesn't even ring, call just drops. Please help!

    Making a facetime call to his phone could not have caused his phone to behave this way. It's not your fault. Your friend needs to troubleshoot the issue on his phone.

  • HT1386 My phone can not activete to the server after updating it with ios 6.1.3 update

    Am using an apple 3g after updating it with ios 6.1.3 update it is failling to activete th the server.What should i do to have it work?

    John Bwalya wrote:
    Am using an apple 3g ...
    The iPhone 3G can Only update as far as iOS 4.2.1
    John Bwalya wrote:
    ... after updating it with ios 6.1.3 update it is failling to activete th the server....
    See this discussion.
    https://discussions.apple.com/message/21189708

  • MBA battery does not charge when connected. Help!

    My MBA battery does not charge when connected to the charger. Ive checked the other threads and followed advice but nothing seems to help.. My battery health info is good, I've tried cleaning the magnetic pins of the charger, reset smc but it still does not charge. The light on the charger is green or does not come on sometimes, and it's the same for a few Power outlets. What else can I do? Would greatly appreciate any help! Thanks.

    It recognizes the charger intermittently. After cleaning, it showed the charger as connected but not charging the battery. I will try my friends charger later to see if it works. Thanks for your help!

  • My iPad air will not charge connected to my monitor or my computer. Why?

    My iPad air will not charge connected to my monitor or my computer. Why?

    Short answer:  Computer USB ports don't deliver as much power as the power adapter that comes with the iPad.
    Details:
    Full size iPads come with either a 10W or 12W power adapter.  The mini comes with a 5W power adapter.
    See iPhone, iPad, iPod: Using iPad Power Adapters
    http://support.apple.com/kb/HT4327
    USB ports on computers deliver 2.5W (USB 2, 500mA x 5v) or 4.5W (USB 3, 900mA x 5v).
    Newer Macs with high power ports can deliver 5.5W (1100mA x 5v).
    See Apple Computers and Displays: Powering peripherals through USB
    http://support.apple.com/kb/HT4049
    If you connect your (full size) iPad to a computer USB port, it may charge slowly, but since it's getting less than half the normal charging power, it may say "not charging".  It may charge slowly or it may not depending on use (screen brightness, processor load, etc.).  If you really want to charge it from the computer, put the iPad to sleep.
    The best charging solution is to use the Power Adapter that came with the iPad.

  • Ipad not getting charged while connected to the laptop

    ipad not getting charged while connected to the laptop.

    It's no different from the iPad 1 in  that regard.  When connected to a computer via USB it should charge when sleeping only.   Hit the sleep button and leave it for a while to see if that works.   It's much slower charging that way than using the actual charger.
    Not all USB's are powered, or powered enough, so what the previous poster said could also be the case.

  • Why is it that my ipad 3rd gen does not charge while connected to my laptop

    my ipad 3rd gen will not charge while connected to my laptop, just beside the battery meter it states not charging.

    Beacause the USB port of most computers don't supply sufficient current to properly charge it. It is best to charge it using the supplied power supply.

Maybe you are looking for

  • Scheduling is not working.

    Hi Experts, Scheduling is not working. I have created the Standalone agent and start the agent. It is working fine. I have scenario on package. I did scheduling for every data at 5AM. The scheduling is not happing (Scheduling is not working). In topo

  • Different user settings for scrolling in tables or ALVs

    Hi Experts, I have a strange problem. I have a Web Dynpro Application that uses the UI Element table. For one user who uses it the scrolling mode is a scrollbar and for an other user the scrolling mode is a paginator. That appears not only for this a

  • Internal Checkout Error using Xcode Continuous Build Service

    I'm trying to use the new Xcode service in Mavericks' Server Version 3 to setup continuous build for a git repository on BitBucket. I've been unable to get it to work successfully. Currently, The Build Agent Logs section shows the following error: Oc

  • Write XMP Data into Adobe Illustrator

    Hallo Forum, an XMP question. I generate a String-Chain of words in an EXCEL VBA MACRO At the moment I copy paste them on the Keyword field because I'm not able to write them automatic in the keyword field. Somebody know's how I can transfer via VBA

  • My ipad was taking really clear photos but now they are blurry and grainy.  Any ideas why?

    My ipad was taking really clear photos but now they are blurry and grainy.  Any ideas why?