MY IPAD 2 IS STUCK OF AN ITUNES LOGO AND A USB CABLE PICTURE ON SCREEN FOR ONE DAY...EVERYTIME I TRIED TO CONNECT IT TO MY ITUNES IN COMPUTER IT SAYS RECOVERY MODE BUT THEN IT ALWAYS ENDED WITH BEING CORRUPTED!!! PLEASE APPLE FIX THIS...
MY IPAD IS STUCK FOR ALMOST ONE DAY.. LAST NIGHT I TRIED TO INSTALL THE LATEST IS UPDATE WHICH IS IOS 6.1 BUT THEN MY IPAD2 TURNED OFF AND THE ITUNES LOGO AND USB CABLE CAME OUT ON THE SCREEN SO I TRIED TO CONNECT IT TO MY ITUNES ON MY COMPUTER AND IT SAYS RECOVERY MODE SO I CLICKED OK BUT THEN IT ALWAYS END UP CORRUPTED... AND IM CONNECTED TO MY INTERNET 24/7...I JUST DONT KNOW WHAT TO DO...I HOPE APPLEWILL FIX THIS AS OSOON AS POSSIBLE...SO DISAPPOINTED!! PLEASE HELP ANYONE... BEEN TRYING TO RECOVERY MODE OVER 150 TIMES...
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.
Similar Messages
-
My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?
Here are Apple Steps: http://support.apple.com/kb/HT1808
-
i just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?
The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer that is running iTunes. Getting started guide : http://support.apple.com/kb/HT4053
The iPad manual also has a chapter on getting started - it can be downloaded from here : http://support.apple.com/manuals/ipad -
my iphone has a itunes logo and usb cable picture on the screen....what can I do to get it to work
What happens when you plug your phone into itunes
-
Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!
Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome. -
My iPhone is in recovery mode, But once it's done with the process a tab comes up saying there was something wrong restoring it (1015) error. Any suggestions of how I could fix this?
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words:
The backup to which you're trying to restore was created with a lower or previos version of iOS than the one installed on your iPhone during the recovery. If this is the case then you'll be unable to restore your phone with that backup and you'll have to set your iPhone up as new. Or,
Your iPhone was/is jailbroken. If this is the case, there is nothing anyone here or at Apple can do for you. -
I awoke this morning to find my iPhone 3g in recovery mode. I tried rebooting, charging, and when I connected to iTunes it gave me a message saying I had to finish recovery first. My screen shows the iTunes logo and the USB cable. Any ideas?
http://support.apple.com/kb/HT1808
-
Why am i seeing athe itunes logo and a usb cable on my ipad screen
why am i seeing the itunes logo and a usb cable on my ipad 2 screen
It means that you need to connect the iPad to your computer's iTunes (recovery mode), and you should then be able to reset the iPad and restore/resync your content to it
-
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
I dropped my ipod touch 3 generation into some water. I let it dry off completely befor turning it back on. Now it shows me the itunes logo and the usb cord picture. I restored my ipod, and now it won't connect to itunes or my computer. What should I do?
Hey
Does it charge when connected, if not you may have broken it..
You can always try an apple Genius at an Apple Store,
Jason -
When i plug in my iPhone to itunes so i could restore because i found it, itunes gives me error code 2009. on my iPhone, all that is displayed on the screen is the itunes logo and a usb cable saying to connect it to itunes. Help please?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. -
My iPod Touch is frozen on the iTunes music note logo and the USB plug picture. Tried resetting - didn't work. Tried restoring - didn't work. Any ideas besides throwing it out my window?
Does the iPod/iTunes go through all the steps of restoring the iPod? If yes then:
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Above from:
http://support.apple.com/kb/TS3694 -
I have a picture of the itunes icon and a usb cable on my screen and cant seem to get rid of it as it is frozen with this on. Can any one help please
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software -
My pod is literally not breathing, no screen display no matter what, I've tried everything, wondering if there's anything I've missed :( please help
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
Tried updating software but now frozen with itunes logo and usb cable picture on screen help
Tried updating ipod software, now frozen with itunes logo and usb cable picture on the screen. Computer will not reconise it
- If ou can turn the iPod off, then see if manually placing the iPod in Recovery mode will allow a restore. Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If it always remains on let the battery fully drain. After charging for at least an hour try a rest and restore.
Maybe you are looking for
-
Hi All, I have a requirement of downloading data from a POWL feeder class into an ASCII format file. Within the method, GET_OBJECTS of the feeder class, I am calling the method cl_wd_runtime_services=>attach_file_to_response and passing the internal
-
Installed FF 15 (32 bit) on a fresh copy of Windows 7 Ultimate edition (x64). Everything works fine except the embedded video. The video clip thumbnail is shown, when clicking on the clip the sound plays and the right-mouse click shows flash player o
-
Displaying a status bar through swings
Hi everybody, My problem is that i want to display a status bar, using Java Swings. In this regard i am facing somwe difficulty, and i would be really thankful to those, who in some way can help me. thanks
-
How to find the Music and Movies folder in your Finder
I wish I bought a cheap computer with low GB space because MacBook Pro GB is not enough so you have to buy an external harddrive anyway. Anyway I wanted to delete some music files but I couldn't delete it from the Disk Inventory. I remember someone f
-
I'm using NetBeans. I created a JFileChooser by selecting it in the Palette and then placed in on my GUI. I noticed that it created two buttons (Open and Cancel) and I would like to put in my code for those two button Action Events. I've looked at th