My ipad 2 screen as just started having blue fuzzy bits and the screen goes black

It just started happeneing..
the screen had blue fuzzy acsents all over it then the screen shuts down.
the ipad is still on.
only works when i put the ipad in "Invert" mode
any one had this problem before?
ipad is out of warranty now
[email protected]

I Have a similar problem. My iPad screen will not respond to touch. If I tough the start button a message appears that says slide to unlock, but will not respond to my touch. If I touch the on/off key a message says slide to power off, but the screen will not respond to my touch. What must I do?

Similar Messages

  • Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?

    Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?
    Worked fine last night. It's running Snow Leopard.

    Does your iMac fail to boot every time or only some of the time?  Here are some things to try:
    - Boot into "safe mode", which will run the equivalent of Disk Utility's "repair disk" operation.
    - Boot from the system install disc that came with that Mac with the "D" key held down to run the diagnostics.  Run them several times to see if any hardware problems are reported.
    - If you can't identify the problem or fix it any other way, download and install the OS X 10.6.7 "combo" updater.
    - If that still doesn't help, try reinstalling OS X 10.6 over the top of what's on the disk.

  • I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the MacBook, and now I am always seeing it. How to remove it?

    I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
    Regards,
    Ujjal

    Backup your files to a external hard drive and disconnect.
    Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
    You can run these things and it might clear your issue or give further informaiton
    Perform a hardware check
    http://support.apple.com/kb/ht1509
    Then see if resetting the SMC/PRAM resolve your issue
    http://support.apple.com/kb/HT3964
    https://support.apple.com/kb/HT1379

  • I start my mac book pro and the screen goes white with an apple in the middle

    I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging  but then it turns
    off again

    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I turn my iMac on and it starts ok but after a minute the monitor goes black

    I turn my iMac on and it starts ok but after a minute the monitor goes black, sometimes it comes back on sometimes it stays off, this has only happened since Apple replaced the hard drive.

    Then, contact the Apple repair station that did the work.

  • Just turned my macbook air on and the screen is white except for what looks like a camera with a question mark flashing.  any ideas what to do?

    turned by macbook air on and the screen is white with a question mark flashing and nothing else on the screen. will not boot up.

    Click here and follow the instructions. If the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk or connect the computer's original thumbdrive.
    (124635)

  • When I click on a contact in Yahoo mail to email them, I get a box with the message "Something unexpected just happened...." and the screen locks up.

    This happens with Firefox 11.0, Yahoo! edition 1.9 on Mac OS/X 10.6. Also the "To" line in the Yahoo mail send screen no longer auto-fills.

    There have been various issues with Yahoo based email and the Flash plugin. Your Flash plugin is pretty old. You should go to http://www.mozilla.org/en-US/plugincheck/ and update Flash and any others that are outdated and then see if the problem still happens.

  • My screen doesnt fit, i go to a website and the screen for example google is longer then my window size and i cant slide over to view the rest of the page

    i go to google, facebook or any other site and the dimensions for the webpage im on are longer then my actual window size so i can only see like half the page, i tried unistalling it then installing it again and same thing and i cant even view my bookmark tabs because there to far over to the right and i can maximize it but it still doesnt fit

    go to help at the top of your browser then click on restart with add-ons disabled, firefox will close then it will open up with just basic firefox, then you can swicth the add-ons back on and it should be ok, ive just done this myself and it worked

  • Wont start - HD makes noise and the screen stays black

    Hi there
    This just happened today. Well yesterday while I was browsing suddenly for no reason my screenn went black and no amount of pressing of keys clicking etc could make it come alive again. So I powered down and restarted. It worked OK.
    Then today same thing, except when I tried to restart the HD started making loud 'wirring' noises and the screeen stayed black. I've been trying on and off to get it to start but no luck. Is there anything that I can do????
    The iBook hasnt been dropped or mishandled in anyway, and nothing has been spilt on it either.

    Try resetting the power manager:
    http://docs.info.apple.com/article.html?artnum=14449
    If that doesn't work, try resetting the PRAM:
    http://docs.info.apple.com/article.html?artnum=2238
    And if that doesn't work, it may be your power manager has gone bad. Hopefully your machine is still under warranty. If it isn't, an authorized service technician can still remove the hard drive and put it inside an external 2.5" Firewire case such as those made by http://www.macsales.com/ so that at least you can recover any files you haven't backed up.

  • Hi All.  My iPad 4 just started having issues with the volume.  On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.

    Hi All,
    I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
    My iPad 4 just started having issues with the volume.  On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
    I haven't tried wired ear phones, but I am sure they'll be the same way.
    It's very random, but consistent enough to happen several times per day.
    Thanks for any help that anyone can provide.
    I have restarted it and also did a Hard Reboot and it didn't help.
    Thanks Again,
    Scott P.

    Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
    Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
    Why would I buy yours?
    I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%.

  • My iPad 2 fell the screen is shattered and the screen went blue. what is my best course of action? Repair it or just get a new one?

    My iPad 2 fell the screen is shattered and the screen went blue. what is my best course of action? Repair it or just get a new one?

    Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.    
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
     Cheers, Tom

  • My ipad is having something wrong in the screen pixels the screen is having an error it is giving a red and baby blue lights all over the screen (invert colours is turned off)

    My ipad is having something wrong in the screen pixels the screen is having an error it is giving a red and baby blue lights all over the screen (invert colours is turned off)

    Try Recovery Mode.
    Read this: http://support.apple.com/kb/ht1808
    Follow the instructions very carefully.

  • My location bar, tool bar (file, edit, tools, bookmarks, help) disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main page.

    My location bar, tool bar (file, edit, tools, bookmarks, help) all disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main page.
    The problem started when I turned on the computer this morning. I tried to install Mozilla 4 from your website and that installed but I still have nothing on the top.

    It may be due to Firebug. Seeing as how you're a web developer, it's very possible you have this installed. The latest version, 1.7X a10, appears to cause everything you described. I downgraded to "a8" and that seems to have fixed everything.
    I also recreated a profile from scratch before trying this out, so I can't guarantee it's definitely Firebug.
    Similar issue: https://support.mozilla.com/en-US/questions/783078
    edit: If you go to the Firebug forums, you'll see this is now a known problem. http://code.google.com/p/fbug/issues/detail?id=4012 for the issue tracker.

  • I just started having a problem replying to emails via aol.  I am getting new mail but cannot reply.

    I just started having trouble sending replies through aol on my iPad. I am getting new mail fine.

    Hi Judego1945,
    Welcome to the Support Communities!
    The article below will walk you through the troubleshooting steps for email on your iPad.  If you are able to send and receive from the AOL website, then the settings within the Mail app may need to be changed or updated on your iPad.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    I hope this information helps ....
    Have a great day!
    - Judy

  • HT201302 I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them Do you have to use PhotoStream to do this. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Tha

    I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Do you have to use PhotoStream to do this?

    How did the photos that you want to copy off get on the iPad  ? To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a Mac you should be able to use iPhoto, Aperture or Image Capture
    To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

Maybe you are looking for

  • A/R Invoice Error

    Hi Experts, I got an error msg "G/L account is missing (2) [Message 131-46]" This happened when I add A/R invoice copy from on Delivery with zero balance. Here in complete scenarion: 1. Create sales order $ 10,000 2. A/R Down Payment Invoice $ 3,000

  • Only 200 songs will import to my 2GB ipod nano

    i have had to reset my ipod after getting what i thought was a virus. The ipod kept on skipping over songs. After reseting that problem has gone away. Now i can only get about 200 songs onto the thing. I should be getting 500? Any ideas as to why thi

  • SQLLDR Using DBMS_SCHEDULER

    hi dear i am using sqlldr from sql with dbms_scheduler.create_job but facing some problem elow is the code this is the schedule for my job BEGIN DBMS_SCHEDULER.CREATE_SCHEDULE ( schedule_name => 'INSERT_SCHD' ,start_date => sysdate ,end_date => null

  • Database copy dropped objects in source schema

    I was seeking out a quick way to copy an entire schema from one db to another and I was happy when I found the "database copy" feature. I checked the documentation and found that all I needed to do was select the source connection, the target connect

  • Portal Content Transport

    Hi folks! I deleted several objects beneath a PCD folder. Now I want to update this folder in another portal system (via transport package - normally...). How can I have these objects that were deleted in the source system to be deleted in the target