My Ipad 2 Screen Has Gone Black and All The Suggested Solutions Arent Working!
Last night, I went round to my friends. he doesn't live far from me so I walked. Before I set off I put my Ipad 2 in my bag. When I got to my friends, I took it out and the screen only showed black. I didn't know what to do so I attempted a few common things, tapping it, charging it and resetting it using the home and lock button. But nothing worked. I looked for a solution on this sight and I haven't had any luck. There was a suggestion where I was to restore the Ipad, I tried it. Before then, my Ipad ran on IOS 7.1.2 I think. But it required me to update to the current software. I updated the Ipad but as it was about to finish restoring, there was a problem and everything stopped. At this point its really begging to test my patience as I spend around 6-8 hours a day using it for work and emails and without it theres little much I can do. Is there anyone who has had similar issues? I just don't understand how it ended up like this within the space of 20 minutes. Also theres the issue of restoring all the back up data, I cannot recover anything if the screen refuses to respond!
I Have a similar problem. My iPad screen will not respond to touch. If I tough the start button a message appears that says slide to unlock, but will not respond to my touch. If I touch the on/off key a message says slide to power off, but the screen will not respond to my touch. What must I do?
Similar Messages
-
My ipad screen has gone black and I don't know what to do the screen still works and I can still unlock it and I can still type. But I don't know what to do can anyone help me it will be much appreciated
If the reset doesn't do it then it's possible that the backlight or another part of your screen has broken. Unfortunately it's not really user servicible. I'd make an appointment at your local apple store and have them check it out. If your device is still under warranty and they don't determine that the damage was the result of 'abuse or neglect' (their words) then it could be a free replacement.
I'd just do a backup before you take it in, just in case. -
hello , ive reset my iPhone 5 and the option i selected was the one where all you content gets removed as i wanted , but now my screen has gone black and all that appears is the white circular loading sign which keeps spining. it won't stop ? help?! im not able to access my iphone becasue of this and i dont know what to do
I just tried deleteing every smart mailbox and re-constituting a few. This went OK until I made one that had to reference a Gmail IMAP 'folder' and as soon I did that ... BAM! ... the infinite spinner appears.
-
My iPads screen has gone black. Ive tried to turn fixing it by holding in sleep and home button for 15 seconds but it hasnt worked
what else can i do??Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using. Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't. It has not been dropped and has been in a case for years! Please help!
When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...
-
Udating my ipa and the screen has gone black with just the apple logo and an updat bar. I cant turn it on/off.
TRY THIS TRICK.... IT HAS HELPED ME SO MANY TIMES!!!
hold down the power button and the home button for about 6-8 seconds or until the screen goes black.... -
my iphone4's screen has gone black and i have received a new warrenty
If this is a Verizon iPhone 4, there is no SIM slot.
For non-Verizon iPhone 4, the SIM is on the right side.
Push a paperclip inbto the hole to eject the SIM tray.
-> iPhone and iPad: How to remove the SIM card -
We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on. Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer. help pls
FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.
-
My iPhone 5c screen has gone completely black, i can't turn it on at all. I can't even reset the phone. However when i plug it into my laptop every couple of seconds it buzzes.
Is there any way i can fix this? Or will i have to go into the Apple store and request for a new phone. I also haven't had the phone for a year yetHi, Raff-Jaff.
Thank you for visiting Apple Support Communities.
I understand that your iPhone 5c screen is blank orwill not power on. Here are the best steps to go through for this issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Cheers,
Jason H. -
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
My Ipad screen has been freezing and now the ipad will not charge
My Ipad screen has been freezing up and now will not charge
Not charging
1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush -
Tryed to update my software but me screen has gone black and the apple sign is flashing on and off
Tryed to update my software and at the end my phone went black and the apple sigh is flashing on and off it's been like tht for 2 days now
Follow the instructions here > http://support.apple.com/kb/HT1808
You may need to try several times to get it to work... -
My 5s screen has gone blank and all it shows is dim light along the edges
My 5s went blank when i was on a call.I tried putting it on but it didnt come on.I tried to do a master reset but that didnt work too.Right now there is a dim light along the screen of the phone.what do i do to get it on and working.
did you see any information on the screen?? try to face the screen to anoy light source and chick if you can see information .if you see that mean you have problem with backlight
-
My iphone screen is black and all the buttons are not working
The screen of my iPhone 4 suddenly went irresponsive and within a few seconds it went completely black. I tried to power it off and also tried the home button but nothing seems to be responding.
Incoming calls still ring out but I am not able to answer the calls and cannot see anything on the screen.
I connected it to my laptop, the iphone appears on "my computer" and I was able to see pictures and videos that are on the phone, however iTunes cannot detect the devise.
Any help please?
ThanksThe phone is now working
I followed the steps in the below link
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks -
I have a split screen with two site. All the suggestions are not working.
Everytime I load Firefox, I get a split screen with two sites on it.
I have tried the resetting of home page and clicking off the icon to not show the site selection page.
I have facebook on the left and it cannot be expanded bigger than a panel. I have a 3/4 screen of what ever web site I wanted to load.
How do I turn this off?
Nothing is working and I cannot imagine how it happened.Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the sidebar" is not selected.<br />
Maybe you are looking for
-
Strange behaviour of Runtime.getRuntime().exec(command)
hello guys, i wrote a program which executes some commands in commandline (actually tried multiple stuff.) what did i try? open "cmd.exe" manually (administrator) type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me "AMD64" type "java
-
Hi All I dont know which one of the following is more effective in JSP writing java code like <% out.println("Hellooo "); %> OR writing like <%="hello" %> I shall be very much thankful to all those who spare their valuable time to clarify my doubt. I
-
Error in the 10.2 and 9.2 UTL_FILE documentation
The 10.2 and 9.2 documentation for the utl_file.fcopy procedure provide the wrong names for the first two parameters http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#i1003400 The 11.2 documentation correctly notes that the na
-
Apple TV Imported pictures have POOR quality!! HELP!!!
I am downloading pictures to enhance my slideshow/screensaver and they all come out with poor resolution. I have tried various sizes and cant figure out what size pictures I need or what resolution????!!! I have not found a picture that comes up HD c
-
My sim tray is locked, and whenever I put the sim eject tool in the hole beside it, it will not open, what should i do?