My ipad 2 screen is black but i can hear it

my ipad 2 screen is black but i can hear it working

I tried that technique but it still doesn't work.  It seems that my home button is not working at the same time and the power button.  but it does reset with the power button if I press it for a moment.

Similar Messages

  • THE screen is black but we can hear comments iPhone 5

    THE screen of THE phone has turned black but we can hear THE phone give comments if we touch THE screen iPhone 5

    Hi there Robbe1999,
    I sounds like you may have the Accessibility features Voice Over and Screen Curtain enabled. Try pressing the home button three times quickly to disable these features. If that doesn't work, you can also manage the accessibility features via iTunes. Take a look at the article below for more information.
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    Managing accessibility features using iTunes
    Connect your iPhone, iPad, or iPod touch to any computer with iTunes installed.
    In iTunes, select your device.
    From the Summary pane, click Configure Universal Access in the Options section at the bottom.
    Select the feature you would like to use and click OK.
    -Griff W.

  • My Ipad (4?) screen went black but I can hear it. I tried hitting both the sstart button and sleep button for 10 seconds and the apple icon comes up, my screen saver shows for 1 second and it returns to black screen again. I can hear SIRI. How do I fix?

    I had been using the IPAD and all of a sudden it started talking back to me and when swiping apps to close them they would not close. She (the IPAD) kept talking back to me such as "use three fingers" etc. Then the screen went blank and if I touched it I could get it to beep at various touch points. SIRI would also communicate, but the screen stayed black.
    As was suggested here, I tried getting a reboot by holding the sleep key with the home key and after 10 seconds the apple logo shows and 5 seconds later my screen saver comes on for just one second, and then it goes back to a black screen. SIRI tells me shes not available and someone else, must be her sister, says things like 90%, 85%, 80% if I continually swipe the screen. Can anyone help me?

    Hello, Juniorjr2. 
    Thank you for visiting Apple Support Communities.
    This sounds like screen curtain may be enabled.  Screen curtain is a feature that allows display privacy.  To disable screen curtain while VoiceOver is enabled, you can three finger triple tap the screen to disable this feature.  You may need to press the home button once in order to process these steps.  If you wish to disable VoiceOver, see the link in the article below.
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    If the issue persists, try reaching out to us here. 
    Cheers,
    Jason H. 

  • Brother threw iphone and screen went black but still can hear vibrations/ring.

    also i tried doing a hard reset but my home button is off and it registers as voice control. cant connect to itunes because of passcode. i need HELLPPP??!

    Try a reset of the device by pressing and holding the home and power buttons for about 15-20 seconds. The white Apple logo should appear.
    It this does not get the display working make him buy you a new iPhone.
    Apple does not repair devices they replace them.
    If the device cannot be accessed due to a passcode and the screen is non-responsive there is nothing that can be done.

  • I was in the middle of using my iPhone 4 running on the latest iOS before iOS 6 and the screen went black but you can see it is still on because the color of the screen is blueish blackish like when your phone is turning off. Any suggestions?

    I was in the middle of using my iPhone 4 running on the latest iOS before iOS 6 and the screen went black but you can see it is still on because the color of the screen is blueish blackish like when your phone is turning off. Any suggestions?

    Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

  • I dropped my phone and the screen went black but I can still hear when I get a call or text.. How can I fix this?

    Please help! I dropped my phone and the screen went black but I can still hear when I get a call or text.. How can I fix this?

    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • The iPhone screen is all black but you can hear the alarm

    The iPhone screen is all black but you can hear the alarm and you can hear when it charges

    The Apple store or any retailer that sales iPhones will be happy to sell you a new device.
    Apple may offer an Out of Warranty replacement at a discounted cost.

  • My iPhone screen is black.  I can hear it ring but cannot answer.  Help!

    My iPhone screen is black.  I can hear it ring but cannot answer.  Help!

    See this Discussion
    https://discussions.apple.com/message/19521062

  • My iphone died and when I plugged it back in to charge it when it powered on the screen remained black.  I can hear when I receive a text and a hear siri.  I have tried holding down the sleep and home button

    My iphone died & I plugged it back in to charge when it powered on the screen remained black.  I can hear when I receive a text and siri.  I have tried holding down the sleep and home button and restoring in itunes neither worked.  The screen on the phone is cracked but has been working fine until now.  Please help!!!

    Here's how to perform the restore:
    HT1414
    If you can actually get to restore, maybe (I estimate a 0.01% chance) you'll be able to do a backup before the restore.  Actually, from the symptoms you describe, I suspect a restore won't work either and you'll need to do a recovery.
    Just in case, if you need to recover (restore fails), here's how.  Note you may have to try to get into recovery mode more than once.
    http://support.apple.com/kb/HT1808

  • My screen is black and i can hear the sounds on my iphone 4s - what should i do.

    my screen is black and i can hear the sounds on my iphone 4s - what should i do. i have tried to restart and i still doesnt work

    I had the same issue with my 2008 iMac and Apple support walked me through the fix yesterday...
    1. Shut the computer down by holding the power button for 10 seconds
    2. Restart the computer and press shift at the same time until you see the progress bar start moving
    3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
    4. After a moment, you should see the spinning beach ball
    5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
    Apparently it's an issue with an automatic update that never quite got past the login screen.
    Hope this helps!

  • My iPhone 4s screen went black. I can hear the phone receiving messages though. I tried to restore through itunes. I failed because "find my iPhone" app is on, I cannot switch it on since the screen is black and I can't see

    My iPhone 4s screen went black. I can hear the phone receiving messages though. I tried to restore through itunes. I failed because "find my iPhone" app is on, I cannot switch it on since the screen is black and I can't see

    Instead of trying to restore through iTunes, use the Find My iPhone to your advantage.
    Either go to www.icloud.com and perform a remote wipe of the device via FMiP, or download the FMiP app to another iOS device and do it from there.
    A remote wipe will also restore the device back to factory settings.

  • IPad Screen Goes Black, But Still SOUND?!?!

    Hello all, As my Title, it says The IPad Screen Goes black. But when i try to scribble around I heard a noise of unlocking it. Even i tryed Home button and Power button for 10 Sec. HHHHHELPPPPP
    Please Answer Quickly As Possible!

    Hi there Bradvance! What is your suburb? I will try to find the nearest possible Apple Store. And have you tryed resetting it by doing this?
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    You are required to connect to your computer. Thanks!

  • Screen is frozen but I can hear music playing? Help, please.

    I bought an 80GB iPod Classic about two months ago. It was working fine until this morning. I noticed that the screen is frozen; meaning I can hear music playing but the screen is frozen. And I can't pretty much navigate. It looks like it became an 80GB shuffle!
    I tried everything, I think. From updating to restoring to resetting. Nothing works. The screen is frozen. Please help!

    You broke your phone, dude.  What help do you need?  Nothing we can do.  You need to bring your phone and $199 to Apple for out of warranty replacement.

  • Whenever I attempt to watch a video of any sort full screen on Firefox my screen turns white but I can hear the video playing.

    When viewing pics or videos in FireFox, when screen is enlarged to full screen, page turns white. While I can still hear audio, no picture. I have seen similar posting in problem questions, but solutions have all been closed out.
    == This happened ==
    Every time Firefox opened

    I have same problem when watching web video and going to full screen it turns white. Audio is still good. If I hit escape all goes back to viewing the video okay.
    It occurs in Firefox 6.3 & 6.8.3, Internet Explorer 8, and Google Chrome. Windows Media Player WILL go to full screen okay.
    I wished I could submit 2 pics: one of video and 1 of the white screen. But I can't so I'm just sending the white screen pic
    kenlorf

  • My iPad screen is black but the iPad itself still works. I reset the iPad but it still doesn't work. What can i do?

    When i went onto my iPad this morning it was completely fine and working but once i took it to college with me the battery had ran out, so later on tonight i plugged my charger in and left it charging for about half an hour, when i went to go back up onto it was just a black screen and every so often when i pressed the power button it would flash blue for a split second then be blacked out again...
    So i had a look on this community to see if there was any solutions that could help and i found a case similar to mine so i tried to reset in hopes that it worked but it never did. I know that the iPad itself is working as i managed to unlock my iPad when putting in my passcode and i was able to get notification through as well, but after the reset i saw the apple logo appeared and it flashed a few times and i could see the setup on the screen to set it up as a new iPad.
    I don't know how or why the screen will not work properly, so any help would be great

    Hello there, Courtney_May.
    The following Knowledge Base article addresses intermittent display issues on iPhone, but is applicable to your iPad as well:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • How to populate optional items in SELECT BOX

    // REGISTRATION.JSP// <%@ page import="java.util.Enumeration" %> <%@ page import="java.util.Vector" %> <%@ page import="java.util.*" %> <%@ page import="java.lang.*" %> <%@ page import="java.sql.*" %> <%@ page import="beans.register2" %> <jsp:useBean

  • PSE 9 and Windows 7. Keep getting exceptions on several task.

    After installing Win7 Home Edition, PSE9 gets exceptions but after discarding I am able to continue, but it is annoying. Anything that I can do?

  • Sparks when plugging in ... :/

    Hallo, I have had my Mac since January and since the first days every time I plug it in (either direct on the wall plug or in a extention cord) it sparkles! We thought it was the building (because it is an old building) and maybe that was the reason.

  • App will not open after update from market.

    I have an android app that when I publish an update and the user downloads the update the app will not open.  It opens for a second and then closes. This happens even if I do not change anything in the update. The only thing I can find is that after

  • Belle FP2 is still unavailable.

    I'm in Srilanka, I'm using a Nokia 603. I frequently check in Software update and device manager for Belle FP2 but its still not available Moderators Note : Reference to illegal third party flashing software removed. Please do not discuss third party