My ipad 2 switched on by itself very frequent after turn off

Can anyone advise me

What do you mean by "turns on"? If you have any push notifications turned on and do not have Do Not Disturbed engaged, you may see the iPad spring to life occasionally.

Similar Messages

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer. I can not turn off Keychain...it is awaiting authorization from the SMS on the telephone I do not have access to.

I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer, itunes does not automatically open when I plug in the USB. I can not turn off Keychain in my ipad since authorization is pending awaiting the code sent by SMS, which I can not get. Can someone advise how to get rid of Keychain. Should I cancel my icloud account?

I appreciate your help.
Have reset the ipad, but that changed nothing. I can not turn off Keychain, iit remains "pending approval". Probably, the only thing to do is to close my icloud account...which I hate to do since there is a lot of data saved there. But, I am unable to back the ipad up on my Windows 8 computer because itunes no longer opens when the ipad is attached.
Oh well...computers are computers and it is impossible to cover 100% of the situations.
Keychain iss not the best app for someone who lives in 3 different countries.
Thanks

HT5654 My iPad is low on memory and it says to turn off apps running in background . How do I do that

My iPad is low on memory and it says to turn off apps running in background . How do I do that

Hello Skittles1202
It sounds like more of the storage of your iPad is full. Plug it into your computer and check in iTunes or on your iPad go to Settings > General > Usage and it will sort out in order of what is taking up the most space. Once you figure that out you can either delete what is not needed or import any photos that you may have to your computer. If you want to close out any application that you may have open previously, then double tap the home button and then swipe up on any app that you want to close
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
Regards,
-Norm G.

HT5642 After turning off the notification switches of some apps in notificaton center, there are still notifications. I'm confused. Why?

After turning off the notification switches of some apps in notificaton center, there are still notifications. I'm confused. Why?

Just guessing, but I would think, as I look at mine, that it might have to do with when the apps were added to the device. To be honest, identifying this as a bug might not be correct. You are the first person I have seen post something like this, so it must not bother others. You can leave feedback for Apple on the feedback page. Go to http://www.apple.com/feedback and then click on the appropriate link.

Firefox is locking up VERY frequently after every few seconds unless I minimize the window and maximize it again. But then in a few seconds it locks up again, unable to click anything or DO anything

Firefox is locking up VERY frequently after every few seconds unless I minimize the window and maximize it again. But then in a few seconds it locks up again, I am unable to click anything or DO anything and it is becoming extremely annoying! Ya'll just released a new version that I'd hoped would have fixed this issue, apparently not...and I also can't select an option in a drop down box, I have to use my keyboard to do so...
== This happened ==
Every time Firefox opened

Yeah I'm seeing this as well. A force quit and relaunch seems to solve the problem for a while.
IMHO the app has just gone downhill in the last few years. Useful tools like browser history from the back button are hidden / rendered useless (click and hold doesn't work so well from a track pad), and it's performance just isn't what it used to be.

New iPad Air 2 with a persisting blank screen. Support site suggests a restore after turning off 'Find my iPhone' on the device. How can I do this with a blank screen?

New iPad Air 2 (December 2014) with a persisting blank screen. Support site suggests a restore after turning off 'Find my iPhone' on the device. How can I do this with a blank screen?

Thanks JimHdk,
After a little more searching across various online resources I was able to cure it by holding down the home button and the on/off button for 10 seconds to restart it and it all came back with a clear screen.

Help please - I can't update my ipad software as always get network connections issues - have turned off security!!

help please - I can't update my ipad software as always get network connections issues - have turned off security!!

I would try updating through a computer. Just make sure that your computer has the latest itunes

How in Ipad 3.2 setup time go to sleep mode[turn off but not shut down]

How in Ipad 3.2 setup time go to sleep mode[turn off but not shut down]?

Go to Settings>General>Auto Lock - tap the arrow and then choose your time setting to put the iPad to sleep.

My ipad 2 just "freeze" last nite, can't be turned off, can't do anything, the page showing is a notice about icloud Backup , but when I touched the Ok prompt, nothing happens, ipad is on 100 battery capacity, it's been almost 24 hrs. any suggestions?

My Ipad 2 freeze since last nite, been almost 24 hrs, last thing it did was this ""icloud back up notice ""appeared on screen, since then, I can't touch OK to get back to where I was , Ipad can't be turned off, can't do anything, first time happened with a frozen screen , it's still within 12 mths old.
any suggestions how to un freeze it, thanks ...?

At first , after I followed instruction to reboot for several times as each time the Apple logo did not appear at all. So gave up. But half an hr or so later, turn it on to check, it seems back to normal once again.
I am very happy. Thank you for all your help ! Can't live without this device !!
Many thanks.

My just bought new ipad screen stuck one a game. Can't turn off, can't get into log in screen. I connect ipad to my imac, but message say need to unlock ipad. But my ipad screened dead. Please help!

My just bought ipad with retinal display 32G, screen frozen at one of game my son play. Now I can't turn off ipad, I can log in ipad. I connect ipad to my apple computer, message say I need to unlock the ipad, the problem is I can't even get to ipad home screen to unlock or enter the password. Basically, my ipad is dead. I can't even know what my series number etc. Please help!
Thanks!

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

CPU usage -- changing very frequently after setting Streams

Hello All,
We implemented Bi-direactional Replication using streams and is working fine.
All of a sudden CPU usage spiked up on one database.
It is changing very frequently sometimes it reaches even 100% .
and this problem is on both the databases.
Please help ,Production issue
Thanks and Regards
Nick

Hello,
You need to find out which process consumes the CPU (it could be the capture slaves or apply slaves). There are many bugs on this area. Check the metalink Note:4378381. and check if you have applied all the recommended patches on top of your patchset.
It would be always better if you mention the PatchSet level (like 10.2.0.4) and OS Platform (like Solaris SPARC 64bit) for all databases involved in this configuration especially when you raise a thread to address a specific problem (than a consultative one).
Thanks,
Rijesh

Ipad 3 charging and sync issues (only charge while turned off)

Hello,
I recently came into possession of an iPad 3rd generation, 32GB with Verizon network. Upon gaining possession I was informed of two issues with the device. One was a busted screen and the other was that it would not sync to iTunes. The person stated that he had taken it to a store and they informed him it was the dock connector and he had it replaced. Once they replaced it the issue was still apparent and he asked for them to remove it and put original back. At this time the screen was busted. I purchased the iPad and ordered new screen and dock connector. The parts arrived today and while the screen is fixed I am still having issues with the docking of the iPad. First off I have restored the device several times, tried different cables and different plugins to include both my USB ports on my Mac and wall plugs. None of which are charging or syncing the iPad. I have completely disassembled the device down to the battery and still no change. What is interesting is the fact that I turn the device off and plug in the charging cord the device turns on. If I leave it plugged in while I shut it down it will charge. Only charging when the device is turned off. With this I assume the port is working. I have tried DFU and recovery to try force syncing to iTunes with no such luck. Any advice as to where to start or what to do?

Hello,
I recently came into possession of an iPad 3rd generation, 32GB with Verizon network. Upon gaining possession I was informed of two issues with the device. One was a busted screen and the other was that it would not sync to iTunes. The person stated that he had taken it to a store and they informed him it was the dock connector and he had it replaced. Once they replaced it the issue was still apparent and he asked for them to remove it and put original back. At this time the screen was busted. I purchased the iPad and ordered new screen and dock connector. The parts arrived today and while the screen is fixed I am still having issues with the docking of the iPad. First off I have restored the device several times, tried different cables and different plugins to include both my USB ports on my Mac and wall plugs. None of which are charging or syncing the iPad. I have completely disassembled the device down to the battery and still no change. What is interesting is the fact that I turn the device off and plug in the charging cord the device turns on. If I leave it plugged in while I shut it down it will charge. Only charging when the device is turned off. With this I assume the port is working. I have tried DFU and recovery to try force syncing to iTunes with no such luck. Any advice as to where to start or what to do?

Why does ipad dim after turning off auto dim

my ipad continues to dim slightly back and forth despite the fact i turned off auto dim, why?

Have you tried closing the scrabble app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with the scrabble game 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the scrabble app to close it (you could also 'close' the apps that are in the taskbar), and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
A third option would then be to delete and re-install the app and see if that makes any difference

Windows 8.1 RDP crashes very frequently after upgrade from Windows 8

Hello,
I installed Windows 8.1 EE x64 as upgrade from Windows 8 EE x64 on my personal computer. After that RDP crashes very frequently.
Here is my errors from event viewer (I have Czech language so sorry for it)
Application Error (ID: 1000)
==================
General
Název chybující aplikace: mstsc.exe, verze: 6.3.9600.16384, časové razítko: 0x5215e2b5
Název chybujícího modulu: ntdll.dll, verze: 6.3.9600.16384, časové razítko: 0x5215f938
Kód výjimky: 0xc0000005
Posun chyby: 0x000000000002de46
ID chybujícího procesu: 0x1ef8
Čas spuštění chybující aplikace: 0x01ceb5de1d230682
Cesta k chybující aplikaci: C:\Windows\System32\mstsc.exe
Cesta k chybujícímu modulu: C:\WINDOWS\SYSTEM32\ntdll.dll
ID zprávy: 6e76e3a0-21d1-11e3-824d-005056c00008
Úplný název chybujícího balíčku:
ID aplikace související s chybujícím balíčkem:
Details
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-09-20T08:48:34.000000000Z" />
<EventRecordID>36478</EventRecordID>
<Channel>Application</Channel>
<Computer>JIRKA-PC.sandster.local</Computer>
<Security />
</System>
- <EventData>
<Data>mstsc.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215e2b5</Data>
<Data>ntdll.dll</Data>
<Data>6.3.9600.16384</Data>
<Data>5215f938</Data>
<Data>c0000005</Data>
<Data>000000000002de46</Data>
<Data>1ef8</Data>
<Data>01ceb5de1d230682</Data>
<Data>C:\Windows\System32\mstsc.exe</Data>
<Data>C:\WINDOWS\SYSTEM32\ntdll.dll</Data>
<Data>6e76e3a0-21d1-11e3-824d-005056c00008</Data>
<Data />
<Data />
</EventData>
</Event>
Windows Error Reporting (ID: 1001)
=======================
General
Chybný blok 127057472, typ 4
Název události: APPCRASH
Reakce: Není k dispozici.
ID souboru CAB: 0
Podpis problému:
P1: mstsc.exe
P2: 6.3.9600.16384
P3: 5215e2b5
P4: ntdll.dll
P5: 6.3.9600.16384
P6: 5215f938
P7: c0000005
P8: 000000000002de46
P9:
P10:
Připojené soubory:
C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER3B11.tmp.WERInternalMetadata.xml
C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER440B.tmp.appcompat.txt
Tyto soubory mohou být k dispozici zde:
C:\Users\Jirka.SANDSTER\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_mstsc.exe_b612095447011e21536732396929f9b226636_4012f314_1494441a
Symbol analýzy:
Opětovné hledání řešení: 0
ID hlášení: 6e76e3a0-21d1-11e3-824d-005056c00008
Stav hlášení: 1
Zakódovaný interval: 9db086049b946847d22aeaa96b0e9f58
Details
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-09-20T08:48:37.000000000Z" />
<EventRecordID>36479</EventRecordID>
<Channel>Application</Channel>
<Computer>JIRKA-PC.sandster.local</Computer>
<Security />
</System>
- <EventData>
<Data>127057472</Data>
<Data>4</Data>
<Data>APPCRASH</Data>
<Data>Není k dispozici.</Data>
<Data>0</Data>
<Data>mstsc.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215e2b5</Data>
<Data>ntdll.dll</Data>
<Data>6.3.9600.16384</Data>
<Data>5215f938</Data>
<Data>c0000005</Data>
<Data>000000000002de46</Data>
<Data />
<Data />
<Data>C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER3B11.tmp.WERInternalMetadata.xml C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER440B.tmp.appcompat.txt</Data>
<Data>C:\Users\Jirka.SANDSTER\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_mstsc.exe_b612095447011e21536732396929f9b226636_4012f314_1494441a</Data>
<Data />
<Data>0</Data>
<Data>6e76e3a0-21d1-11e3-824d-005056c00008</Data>
<Data>1</Data>
<Data>9db086049b946847d22aeaa96b0e9f58</Data>
</EventData>
</Event>
Could you help me please?
Thanks

Hi Jiří,
looks like a bad Audio codec (bdmpega64.acm) causes the crash:
* Exception Analysis *
*** WARNING: Unable to verify timestamp for bdmpega64.acm
*** ERROR: Module load completed but symbols could not be loaded for bdmpega64.acm
APPLICATION_VERIFIER_HEAPS_CORRUPTED_HEAP_BLOCK_EXCEPTION_RAISED_FOR_PROBING (c)
Exception raised while verifying the heap block.
This situation happens if we really cannot determine any particular
type of corruption for the block. For instance you will get this if
during a heap free operation you pass an address that points to a
non-accessible memory area.
This can also happen for double free situations if we do not find the
block among full page heap blocks and we probe it as a light page heap block.
Arguments:
Arg1: 000000aa6c971000, Heap handle used in the call.
Arg2: 000000005d0b4440, Heap block involved in the operation.
Arg3: 0000000000000000, Size of the heap block.
Arg4: 00000000c0000005, Reserved.
FAULTING_IP:
verifier!VerifierStopMessage+28a
00007ffd`f922a43a cc int 3
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 00007ffdf922a43a (verifier!VerifierStopMessage+0x000000000000028a)
ExceptionCode: 80000003 (Break instruction exception)
ExceptionFlags: 00000000
NumberParameters: 1
Parameter[0]: 0000000000000000
CONTEXT: 0000000000000000 -- (.cxr 0x0;r)
rax=000000aa5cfc0000 rbx=0000000000000000 rcx=000000aa5cfc0000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=00007ffe08bc808a rsp=000000aa5e83cb08 rbp=000000aa5e83d950
r8=0000000000001000 r9=0000000000000000 r10=0000000000000040
r11=0000000000000286 r12=0000000000000000 r13=0000000000000000
r14=000000aa5cfb0000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe cy
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000203
ntdll!NtWaitForMultipleObjects+0xa:
00007ffe`08bc808a c3 ret
DEFAULT_BUCKET_ID: STATUS_BREAKPOINT
PROCESS_NAME: mstsc.exe
ERROR_CODE: (NTSTATUS) 0x80000003 - {AUSNAHME} Haltepunkt Im Quellprogramm wurde ein Haltepunkt erreicht.
EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - Mindestens ein Argument ist ung ltig.
EXCEPTION_PARAMETER1: 0000000000000000
NTGLOBALFLAG: 2000100
APPLICATION_VERIFIER_FLAGS: 48004
APP: mstsc.exe
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
FAULTING_THREAD: 0000000000001630
PRIMARY_PROBLEM_CLASS: STATUS_BREAKPOINT
BUGCHECK_STR: APPLICATION_FAULT_STATUS_BREAKPOINT
LAST_CONTROL_TRANSFER: from 00007ffdf92292e4 to 00007ffdf922a43a
STACK_TEXT:
ntdll!NtWaitForMultipleObjects
ntdll!RtlReportExceptionEx
ntdll!RtlReportException
verifier!AVrfpVectoredExceptionHandler
ntdll!RtlpCallVectoredHandlers
ntdll!RtlDispatchException
ntdll!KiUserExceptionDispatch
verifier!VerifierStopMessage
verifier!AVrfpDphReportCorruptedBlock
verifier!AVrfpDphCheckNormalHeapBlock$filt$0
ntdll!_C_specific_handler
ntdll!RtlpExecuteHandlerForException
ntdll!RtlDispatchException
ntdll!KiUserExceptionDispatch
verifier!AVrfpDphFindBusyMemoryNoCheck
verifier!AVrfpDphFindBusyMemory
verifier!VerifierCheckPageHeapAllocation
verifier!AVrfpHeapFree
bdmpega64
0x0
0x0
0x0
IMAGE_NAME: bdmpega64.acm
FAILURE_BUCKET_ID: STATUS_BREAKPOINT_80000003_bdmpega64.acm!Unknown
Loaded symbol image file: bdmpega64.acm
Image path: C:\Windows\System32\bdmpega64.acm
Image name: bdmpega64.acm
Timestamp: Thu Aug 09 09:40:14 2012
From what I can see the file bdmpega64.acm belongs to a tool called http://www.bandicam.com
Update the tool to the latest version 1.9.0.397:
http://www.bandicam.com/downloads/
If this doesn't fix it, remove it or disable Audio in the RDP options.
"A programmer is just a tool which converts caffeine into code"

My ipad 2 switched on by itself very frequent after turn off

Similar Messages

Maybe you are looking for