My iPad 2 was without battery for about a month or so. but when i charged it, had 2% battery and it showed not charging . Now its totally dead and not charging just then apple logo comes and go off the screen when i try to charge it :(
Any Help would be Appreciated !
Charge it over-night and try a reset the next morning.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Similar Messages
-
My Nano shuts off in the middle of playing music/podcasts. It won´ respond until plugged in, then apple logo appears and it restarts. I restored factory settings and installed the newest OS which worked for a week, but it´s the same problem today. It happens while at 50% power or better (according to battery icon).
It sounds like the battery itself is going bad, which is likely given the age of the 4G Nanos. You'll want to have your iPod serviced by Apple or a third party service center to have them swap the battery out. Otherwise, it's time to start investing in a new iPod.
B-rock -
I have a 2 ibook g4's this is the second one but I started it up and all that happens is the apple logo comes up on a white screen and then nothing happens what should I do?
Reinstall OS X.
-
I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery... or just buy a galaxy s5?
If you dropped it in water, and then plugged it in, you may very well have destroyed the battery and/or the logic board. Charging/plugging in to a power source is very damaging to wet electronic devices. There is not much you can do but replace the entire iPhone...and since you did repairs yourself Apple will not do an out-of-warranty replacement.
You can try replacing the battery, the lightning port is another issue, but I would not expect that iPhone to work again. -
I switch on my iPod,apple logo comes and a white screen comes after the apple logo and it restarts again
Try here:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Frozen and unresponsive
You may have to let the battery fully drain and then charge and try again.. -
i lost my apple shufle's(2 generation) charger 3 months ago,i bought a new one(charger) and the ipod is not working now.its completaly dead.when i lost the charger the battery was finished.now with the new charger its like its broken,help please
There is no way to remotely track or disable an iPod nano, either for you or Apple. As it can't connect to the Internet on its own, Find my iPhone isn't available for it.
(84600) -
Hi I Have A Prepaid Smart Phone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line. Is There Anyway I Can Use My Excellent Payment History With There Prepaid Department To Switch To A 2-Year Contract And Not Have To Pay The $400 Deposit. And This Is Due To The Fact I Have No Credit History Whatsoever
Since you have no credit history, my guess is you would need at least a year of on time payments, and I'm not sure a pre-paid account would qualify as you can stop at any time.
You didn't specify your age, but getting started int he credit world is not easy - you may try applying for a gas card, or a credit card, and USE them, pay them off each month - and expect to take a year or more to establish a record. -
Reader XI has the print button off the screen when on 800x600 resolution
Reader XI has the print button off the screen when on 800x600 resolution as well, how to fix without changing resolution? A user needs the resolution set to that for her eyes.
I see that this was an issue in Reader X and update 10.1.3 resolved it. What was the fix?The scrollbar appears and works but unfortunately the dialog size is still too big therefore the print button ends up being hidden by the windows taskbar. Could you please make sure that the print dialog size is calculated against the work area (desktop size minus the taskbar, there's a win32 API to get that) rather than the whole desktop to fix the issue?
That would also fix another issue: when the taskbar is sized higher than usual whatever the resolution you have it could still end up covering the print buttons but if you calculate against the work area rather than the desktop area that issue would be fixed as well.
Please don't leave it unfixed because even if the requirements say 1024x768 if you have higher DPI settings or have a taskbar with a non-default size the print button could easily become unreacheable. -
Satellite A660-11M how to turn off the screen when I'm downloading?
i just want to know how to trurn off the screen for save energy and protect the screen,someone tell me please! thanks a lot !
If you are ready to switch off, put to standby/sleep mode you laptop by pressing alt-F3-F4 or through menu, then I recommend you set in power options "when I close the lid-do nothing". In that case closing the lid will switch off the screen for downloading time.
-
My ipod is not starting. apple logo come and restrat the ipod. what should i do?
when i starting my ipod touch 4g. it is'n start. apple logo coe and restart the ipod. what should i do?
Try here:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Frozen and unresponsive
If the screen keeps cycling on and off. let the batter y fully drain and then charge and try again. -
MacBook Pro Display (window) shifts off the screen when I move my mouse
With a slight move with my magic mouse, my entire open window will shift completely off the screen with only a part of the window still visible. I have to click on the exposed edge of the window for it to shift back into place. It's only the window of the program that I have open that moves. The dock and the desktop image stays in place. I'm using an HP external monitor now but it was doing this before I hooked up the monitor. I've tried maximizing and minimizing my window but that does not seem to have an effect. Could it be the magic mouse? Thanks in advance for any help.
Wow. The power of Google is truly amazing. Just a little while ago, my husband was going nuts with our computer. I googled the words 'when I move my mouse to the left, the screen moves to the right'. And, Eureka! What do you think was the first thing that popped up on Google?
Well, the answer to my question, of course!:P Which led me right to here. It may not have been me that asked the question, but this did answer MY question!
Apparently this applies to Leopard too. Thanks alot!
Message was edited by: Linda Schodowsky -
The hdmi adapter no longer works, and I tried it on different tv, different hdmi cables, apple's adapter still don't work. My iOS is 5.1 by the way. HDMI cables work fine for other devices, connect it to my computer, works fine, connect it to dvd player works fine. So what is going APPLE? I splashed out SGD59 for this handy adapter, and it no longer works after a month!!!
ipadfan2012 wrote:
Hi yes, I've turned my new iPad off and turn it back on again, along with my Tv, still did not work
No. Meg was referring to a reset:
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
Header 1
Header 2
iPhone 4 screen remains blank and only the apple logo appears on and off when connected to mains or PC. Only on mains occasionaly proceeds to display IOS 6 logo and a slide sign to start recovery which proceeds to an instruction to connect to iTunes. Hwever, as soon as disconnected from mains (in order to connect to the PC) screen goes totally blank again. On connecting to PC the Apple LOGO starts appearing intermittently but does not proceed to display IOS 6 LOGO. I have recharged overnight and followed resetting instructions as per the iPhone support page. Any suggestions (short of taking it to a service centre) ?did you get any help regarding the problem?? because even i have the same problem!!! guess it all started after updating to iOs 6
-
this keeps repeating what can i do?
Hi rosethatsme,
Thanks for visiting Apple Support Communities.
I recommend these steps if your iPad is unexpectedly restarting:
Make sure your iOS device is up to date. If you still see this issue after updating, contact Apple Support.
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
Best Regards,
Jeremy -
My MacBook Pro is going flat in around 2 hours. Only had the new battery for about a month
My pro is loosing battery in about 2 hours. Just got the battery replaced so I don't know what's happening
The most likely causes include: (1) Some process is really using a lot of CPU (see Activity Monitor and/or click on the battery icon to see if any apps are reported there), (2) The battery you bought is faulty.
Maybe you are looking for
-
Layout View is empty in WAD 7.0
I have created a WAD with tabstrip. This WAD runs fine when executed but in the web application designer the Layout View is empty. I can see all the web items in the overview tab and XHTML tab is OK too. Just the layout view is not showing anything.
-
Regarding Creation of Custom IDOC
Hi, This is Abdullah Shaik. I want to create an IDOC from the existing IDOC. Some times I need to add some segments to the existing IDOC. Can anybody plz let me know the process how to create the Customized IDOC from the Standard IDOC? Thanks & Regar
-
Strange behaviour when placing text frame on top of image
Hi, Win XP, FM 8.04 I have a front cover that consists of a TIF image that bleeds off the page. On top of that image I want to put a text frame with the book title. The strange thing is that when I create the text frame and use the toolbar buttons to
-
Tecra 8000 composite video out
I am trying to direct video output from my tecra 8000 via the yellow video composite jack at the back of the unit. I thought it was as simple as pluging in both sides of an RCA jack (one end to the video input of a VCR and the other end into the Tecr
-
What is administration port od OC4J which BPEL manager is deployed into it?
Hi Thank you for reading my post How I can open administration console of OC4J which BPELmanager us as its underlying apps? I want to change Connection pool definition. Thanks