My iPad 2 wifi keeps rebooting , and it doesn't update the battery status . Can anyone help me with this one?
My Ipad 2 keeps rebooting and it doesn't update the battery status anymore.
Here is the error
Incident Identifier: D729F1DF-6960-4847-A6C3-75351A67AE9B
CrashReporter Key: c7e1a298a42fc9bbb41b4ed79ff29a1655de12a6
Hardware Model: iPad2,1
Date/Time: 2013-02-16 02:58:06.115 -0800
OS Version: iOS 6.0 (10A403)
CRC ERR!
I had this problem for quiet sometime now, and I would really appreciate your help. THANKS
I did try restoring the ipad a couple of times and it didn't do the trick. I also tried updating the firmware.
The only thing that worked for a while when the ipad - on it's own - rebooted itself into a black screen with white text and automatically fixed the issue. It worked perfectly for a couple of months but it came back after I forgot to charge the ipad , does anyone know how I can force the ipad into that screen again ?
Similar Messages
-
I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s
I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..
-
I bought a film on iTunes and whenever I try and play it it says "your computer is not authorised to play this" and so I type my password in and it says "your computer is already authorised" and then doesn't play the film. Can anyone help?
ah this is a simple fix. open itunes go to store on the top menu bar and click store. scroll down and click
"Authorize this computer" fill in the info requested and there u have it. -
I have an IPAD 2 that I forgot the password to sign on the device. Can anyone help me with this? How do I force the IPAD2 in to recovery mode?
Did you connect it to iTunes? This is from that link...
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
SUddenly my music videos won't play on my ipad1. I just get the audio. Can anyone help with this please?
Look in the Videos App and play them in there.
-
Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?
All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then? -
I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???
You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.
-
my ipod nano 3 generation keep turn in and off even when the hold botton is in on possicion can anyone help me with this please?
iPod Manuals
-
The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?
greeneygreeney wrote:
so you can't ever restore it to the factory settings? that is a big shame.
"It will ALWAYS restore to the lates available software.
You cannot downgrade." -
i have an iphone 3gs and everytime i try to restore it on itunes it just keeps saying an unknown erroe has occured (29) can anyone help me with this??
Hello Laura,
Thank you for posting in the Apple Support Communities. I found an article that has information about Error 29:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Best,
Sheila M. -
I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?
Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
I can't download iOS 7 on my iPad 3. I says my software is up to date (6.1.3). Can anyone help me with this?
May just be the update server acting glitchy due all the people slamming it right now. I'd give it 24 hrs, and if it's still doing it, check back in here and we'll see if we can't figure it out.
= L.I. -
I am trying to airprint a brochure from my iPad from the Pages app. I need it to be landscape but I cannot find how to change it from portrait to landscape. Can anyone help me with this?
I think you have to sign into your Amazon Kindle Account, find the book in your archive and delete it there. Otherwise you can delete it from the device and leave it in the archive, should you want to look at it again.
-
Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
My phone constantly turns it self on and off, it won't let my messages load I carnt text or receive and texts or calls, I have updated the new iso7, can anyone help?
Hello Bricky2013,
The following article has some useful tips that can help stabilize your iPhone.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen
Maybe you are looking for
-
Terms and conditions not getting displayed on the last page
Hi All, I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in du
-
Reading cue point parameters on video start
Im trying to create a table of contents to navigate to various points in an .FLV file. I've encoded the flv with cue points in media encoder. I've also added a parameter to each cue called toc_title with the lable that should represent the time in t
-
I am having an issue where my pages look perfect in muse.....but in they preview (muse and browser) the seem to be bugging out and the header space is stretching. It worked fine one minute then the next.........I'm sure I didn't change any settings.
-
Which MacBook air should I buy??
I have 2 options for buying MacBook air? 1) 11 inch i7 4 GB Ram and 128 GB flash memory 2) 13 inch i5 4 GB Ram and 128 GB flash memory Which laptop will best suit me for word excel PowerPoint and day to day office use. Would be replacing my desktop w
-
How to change Bridge CC default's to open images in PS CC?
Bridge CC default to open images is PS CS6, how do I change the default to PS CC?