My iPad 2 will not complete the download of software upgrade 6.1.2?

Hi. My iPad 2 will not complete the download and install of the iso 6.1.2 software upgrade to fix the calendar exchange that is draining battery. It goes through the process and then just says there is an error but does not indicate the error. Any ideas gratefully accepted.
Also I don't know if it is connected but it also will not download new apps or iBook I purchased. Please assist if you can.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off the router and then power it back on
- Reset network settings: Settings>General>reset>Reset Network Settings. You will have to rejoin all networks

Similar Messages

I need to download an updated version of Adobe Flash. When I go to System Preferences, Adobe nd then Advanced, it says to download the newer version, but when I click on it, the program will not complete the download. It is VERY frustrating.

Why won't the Adobe flash successfully download the newest version? I tried going to System Preferences, Adobe Flash, Advanced, Check Now and clicking on update.

Try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player

I have just updated my ipad to 7.0.2 but now when I want to watch a download on BBC IPLAYER when I am off line it will not play the download. I can only watch the download when I am on line

I have just updated my ipad to 7.0.2 but now when I want to watch a download on BBC IPLAYER when I am off line it will not play the download.
I can only watch the download when I am on line . The funny thing is I can watch it then if I turn off my modem untill I shut down my i pad . Before the update I didnt need to be conected to watch my down load . Can any one help please ?

Here you are "the strange draft logos"...

HT4061 I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

TS3212 I'm trying to download i tunes for windows 8 but it will not complete the process?

I'm trying to download i tunes for windows 8 but it will not complete the process

does it give you an error message?

IPhone 4s will not complete the recent download of iOS.702

My iPhone 4s will not complete the most recent download of the iOS 7 too. It accomplishes about 20% and freezes. I have tried resetting several times. Same result. The phone is for all intents and purposes locked up on the download screen. Has anyone else had this problem.? And how was it solved? An online search shows nothing regarding this problem.

I've already tried unplugging the iPhone and restarting my computer - twice.

IMovie 9.0.7 will not complete the update either with the download dmg file from the apple site or from the OS software update. I would appreciate some advice.

When installing the new update 9.0.7 to iMovie either via a dmg file or from the software updater the install will not complete the installation. The indicator bar just stays in the same place with the note install time remaining about a minute. I have let it set for hours and nothing happens. Does anybody have any advice?

Try this.
After signing into the Mac App Store (MAS) with your iTunes Apple ID, look at the Purchased page. You should see the three bundled iLife apps listed with Accept buttons. After you have accepted them and Apple has verified that they came on a new Mac and assigned them to your Apple ID and iTunes/MAS account, you should be able to update them.

HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimet

Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
Thanks

I have same issue - have you solved this yet?

My ipad will not open the app store...any suggestions?

My ipad will not open the app store...I have turned it off and back on and it still just says loading and does nothing.

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

My iPad would not complete the back up to iCloud. The solution re: resetting my iPad did not work. Are there any other ideas?

My iPad would not complete the back up to iCloud. The suggestion re: resetting the iPad did not work. Are there any other ideas?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Firefox will not complete the installation even after several attempts of rebooting the computer.

I downloaded the Firefox 9.0.1 upgrade but it will not complete the installation on my computer. Everytime I try to remove the program, it tells me to reboot the computer to finish the installation. After several reboots, the same error keeps coming up.

Try to run the Firefox program once as Administrator (right-click firefox.exe: Run as Administrator).
If that doesn't solve the problem then remove the Firefox program folder (C:\Program Files\Mozilla Firefox\) to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

My iPad will not let me download an iTunes movie due to lack of space but I purchased more space and it still won't work

My iPad will not let me download an iTunes movie due to lack of space but I purchased more space and it still won't work

As stated above - purchasing more space in iCloud has nothing to do with this. You do not have enough space left on the iPad for the movie to download, you need to delete content on the device itself.
You may want to transfer purchases to iTunes and then delete some content on the device to make room.
Transfer purchases.
http://support.apple.com/kb/HT1848
This article explains how to delete content from the device
http://knowledgebase.pearsonschool.com/kmp/public_kbase.php?action=showEntry&dat a=4408
Do not delete any important content without backing up, transferring purchases or transferring files to your computer.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

HT201263 None of these answers help my problem. My ipad will not leave the Apple logo. I hold both buttons and the screen goes black, then the apple logo immediately pops back up. I can't do anything because the apple logo just keeps popping back on.

I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore

Why does iTunes freeze when movie download is processing and it will not restart the download but yet it billed my acct for payment already?

Why does iTunes freeze when movie download is processing and it will not restart the download but yet it billed my acct for payment already? It has been a week now and still not done processing. I get an error message when I try to restart the download.

What Windows version?

My iPad 2 will not complete the download of software upgrade 6.1.2?

Similar Messages

Maybe you are looking for