My ipad 2 will only charge if the system is completely shutdown and it can take up too 7-8 hours to reach 100% 2 hours later I'm down to 12-13% what's wrong with it?
My grandson's IPad 2 won't hold a charge. It will only charge when the system is completely shutdown and it can take up to 8 hours to reach 100%! he's only 5 so he uses it to watch netflixs and playing games but a couple of hours after finally getting a full charge the indicater is down to 12%-13%. Keeping the system plugged up while he's using it doesn't do any good its like its not even plugged up. What could be wrong? Any assistance would be appreciated! I brought the IPad 2 in 2011 and gave it to him in 2013 when I brought myself the IPad Air...so its really not that old to be acting up...
Hi manisnana09,
If you are having issues with charging and capacity on your iPad, you may find the following articles helpful:
iPad: Charging the battery
http://support.apple.com/kb/ht4060
Apple - Batteries - iPad
https://www.apple.com/batteries/ipad.html
If you are still having issues, you may need to have your iPad serviced, or at least evaluated. You may find this page useful:
Service Answer Center - iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Regards,
- Brenden
Similar Messages
-
my ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. I'm not sure what generation it is, its an 80GB. Help?
The battery is possibly unable to take as much power as a normal battery. It may need a replacement battery.
-
My iPad will not charge from the wall outlet or the USB. I also used three different chargers, as well as rebooting my iPad several times.
Then it's time to make an appointment at your Apple Genius Bar at your Apple Store. Apple will check it out and if it's defective and still in waranty (you don't say which model you have), it will be replaced.
-
My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!
Restore iPhone with iTunes on your computer.
-
Ok one thing i found is if your itunes needs updating and you hook your ipad to your mac (lucky if you have a imac to do so) it will charge.
What is up with Apple , did the updates for patches after IOS 7 and still will not charge. Using orignal charges that came with equipment on a good wall circuit.
Does not matter which one will not charge . HELPPPPPPPPPPPPPPPPPPPPPPPPPMost USB ports do not provide sufficient power to charge an iPad. Normally it's best to charge your iPad using the original charger and original cable.
If the iPad will not charge there are only a few possibilities.
No power to the outlet.
Bad cable. Try a different cable.
Bad charger. Try a different charger.
Dirt or crud in the connector port. Check and clean carefully.
Software failure. Reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
Ipad will only charge with one charger, not recognize by pc or itunes
I have an Ipad 1. I bought a third party car charger to charge the ipad. I charged it with this charger one time. The next time I tried to charge the ipad with the original 10W wall outlet charger, it would not charge. I bought another apple ipad charger, thinking my original charger had quit working, it still would not charge. I plugged it back into the car charger and discovered that it will only charge on that particular charger. Now itunes nor my windows pc will recognize the ipad. I uninstalled itunes and installed the newest version. I also hard reset the ipad and now I have a worthless ipad that will not connect to itunes. Any suggestions?
It's possible that charger damaged some part of the connection on the iPad. There's little metal contacts on that small silicon chip sticking out of the port and if something happens to one of those little contacts it can effect how it works.
You can try taking it into an apple store and have them look at it. If you'd only used 'official' stuff there'd probably be no question but once they know that the damage, potential damage, was caused by a third party device, then it may be up to the discretion of the manager what they do with it. Whether they replace it under warranty or decide that the warranty is void (I honestly don't know how strict they can be with the use of third party devices and how they may/may not work) -
My ipad will only charge on my mac bookair but not on my sony vaio? what can be the problem?
anyone please?? i hav an ipad 2 and it dosent charge when i plug it into the wall outlet or my sony vaio laptop, what can be the problem?????????????? when i plug it in it saids not chrging by the battery bar, but once i plug it in to my mac book air it charges normally???? please help
The iPad should have come with a 10w charger...it is the same charger as used with the iPad 2. The charger and iPads are interchangable. If the two of you can share the parts, you take the MacBook and husband the charger you should be able to manage the charging.
If you have lost or misplaced the chargers, then it would be best to buy another to avoid conflicts, afterall, it is Valentine's Day and best to avoid conflicts -
It no longer charges using the wall charger. I know the wall chargers work. Anyone have any ideas??
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On... -
I am connected to my VPN but it will not connect to the server. Why? And how can I connect?
Hello,
I have connected to my university's VPN. I went through the 'system preferences', 'network' scenario without a glitch. Connection worked perfectly. My menu bar assures me I am connected to the VPN.
However, I could not find the files from my uni drive anywhere on my computer and I realised that on some level I must not be connected to the server, despite having been 'connected', the menu bar informed me, for '00:09:34'.
So.. I go 'command+K', say 'afp:\\IP address of my server' and click connect, and then I get the error message:
'There was an error connecting with the server 129.238....
Ther server may not exist or is unavailble at this time. Check the server name or IP address, check your network connection and then try again.'
I try again but this time with the server name, then I make sure my wifi IP address and VPN IP address are sufficiently different. Same error message. And the VPN is definitely connected. And my wifi definitely works.
What am I doing wrong/ missing out?
Thank you for your help in advance,
MelI'm having the exact same issue. I'm connected to the VPN, but I can't mount or otherwise connect to the shared drive. Did you ever resolve this?
-
yesterday my charger was working fine, all day long I got home and go to plug it in and it's not working, I let my phone die and it starts working like the battery symbol shows up but once the phone is on it stops working. I've tried a couple of leads but I know they aren't proper apple and it still doesn't work, my friend said I've probably fried the battery but I'm not sure, but I know since I got the phone the battery hasn't been all that good, it charges quickly but then also dies quickly, I really don't know what to do and I really need some help, should I get a new lead or replace my phone because I have insurance?
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If nothiing above helped, restore the iPhone to factory settings > Use iTunes to restore your iOS device to factory settings -
Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
If I connect directly to the computer I have a good connection so it is not my ISP
I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
And just so you know . . . I have a smart TV and it is connecting to the net okay!apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together. -
the download video box does not come up anymore and the videos do not play?
Probably due to the RealPlayer Browser Record Plugin being blocked by Mozilla due to the huge number of crashes it has been causing over the last week and a half, or so.
https://addons.mozilla.org/en-US/firefox/blocked/i106 <br />
https://addons.mozilla.org/en-US/firefox/blocked/i107 -
I plugged my phone into my laptop this morning and it started doing an update. I walked away from my desk, came back and had an error message and a prompt saying my phone is in recovery mode and needs to be restored. But when I click "ok" to do that it says it will restore the factory settings and I'll lose all media, data and contacts. I DON'T want to do that--the whole reason I plugged my phone in this morning was to download some new photos, so I can't lose them!
The phone isn't working...it's showing a usb connector pointing to an iTunes icon.
Help!!!If your phone is in recovery mode, you've already lost all data on the phone...its gone. Your only option now is to restore the phone, either from backup or as a new device.
-
Nothing else except the top three buttons do anything. No sidebars, nothing. Blank window. I am using Windows IE to get to you now. Firefox is useless.
I have used firefox for about 6 years and this is the first time this has happened.What version of Firefox are you running and what OS are you running?
Have a look at this [http://bit.ly/f1dxog forum answer].
Maybe you are looking for
-
My iTunes wont download my purchases error (-50)
It just wont work. I have 8 downloads pending and none of them will work. iTunes is not blocked on my firewall. Ive tried restarting my computer. I just want to be able to download the things I paid for fair and square!!!
-
Create new transaction type in transaction DNO_CUST01
Hello everyone! We are configuring the service desk scenario and now on Define Transaction Types phase. In our system we have not SLF1 transaction type, and while we are trying to create this type in transaction DNO_CUST01 we can't do it ("Choose the
-
What car charger can you use with ipad w/ retina display?
what car charger can you us with ipad w/ retina display?
-
Mighty Mouse and Maya? How does it wok?
Does anyone have any experience with the Mighty Mouse and Maya? I'd like to know how it works with the right and middle clicks. Thanks!
-
H:PanelGroup layout. Error in documentation ???
Hi, The render kit docs clearly say: If the "style" or "styleClass" attributes are present, and the "layout" attribute is present with a value of "block", render a "div" element ... No matter what I do, I get a span element rendered. Can someone expl