My ipad 2 won't fully restore, it stops at about 95%

i went to update my ipad to 4.3.2 and it saif i had to restore it, and i have tried 4 times letting it go for about 2 hours each time, and it gets hung up when the bar is almost full, the same place each time, my itunes is current. i have talked to AC 3 times but they are no help. any ideas?

Seems like a software issue, make an appointment with someone at a genius bar at your local Apple retail store.

Similar Messages

HT1695 Today for some reason my IPad won't fully connect to my iphone and tether. For instance under settings it shows next to "Wi-FiI'm connected to the Wi-Fi but at the top of the screen there is no connection symbol and in fact i am unable to load web

Today for some reason my Ipad won't tether properly. The iphone says it's connected and on the Ipad next to Wi-Fi in settings shows I'm connected but at the top left of the screen there is no connection icon and I cannot load and display web pages. My Ipad is about three weeks old and I have never had this problem before. I have rebooted but this did not solve my problem.
Any ideas?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why computer won't fully load Acrobat - stops every time at 80%.

I cannot get Acrobe Pro to load fully. It freezes every time I attempt to load it at 80%.

Hey Melissa ,
1.Which version of Acrobat is it?
2.Do you get any error message,If yes please share the same.
3.Try using a different browser ,for ex Google Chrome ,Mozilla Firefox or Internet Explorer .
Or
4.You can try downloading through this link http://www.adobe.com/in/downloads/other-downloads.html
Regards
Sukrit Dhingra

My iPad won't restore, I have tried on 3 different computers, always error -1

Hi,
It all started yesterday when I turned off the wifi and didn't find the 3g network. Then it begin to restart all by itself...When I tried to restore it gave me the -1 error )tried on 3 different laptops). During the restoration it stopped at about 70% and then gave the error

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Message was edited by: Texas Mac Man

IChat screensharing won't fully connect with dual-monitor setup

I've read through several threads but none seem to match the peculiar problem I am having.
My mum just got a new "13 MacBook Air and an external LG LED (E2240T) monitor. I ran software update on it so her system is current, as is mine (late 2009 MBP/24" ACD).
Screensharing works fine when her external monitor is not connected but when it is plugged in and we try to screenshare the audio connection is established but sharing won't fully load and stops with this:
We tried unplugging the monitor and then plugging it in once the screensharing connection was established and that ended up with the image on my end freezing.
Anybody else have a similar problem? Any suggestions?
For what it's worth with her old (2006) MBP and old LG LCD we had no problems.

Hi,
I have an old 17" Studio Display (The one with the ADC connector) and a 19" CRT Screen that I have On sometimes with my G4/1Ghz Dual Processor.
This is running Snow Leopard.
If I share Screens using iChat with my MacBook Pro, the MacBook Pro puts the Screens Side by side as one picture (You cannot view just one screen).
iChat has a Software "Camera" that deals with the "Desktop" or what ever is on it as the pic for the Screen Sharing feed.
I have tried several Resolution settings on the CRT and iChat seems to cope (They are in a fairly narrow band though).
It might be possible that iChat is having difficulty if the two screens are vastly different in Size or resolution settings.
You seem to be describing using a 13" screen and the 21'5" one which may explain it.
There may also be differences in the Ratio.
3:48 PM Sunday; January 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

My 1st generation ipad won't power up. It flickers but then no display. It is fully charged and I have restored to factory settings

The ipad originally lost half of the display on the screen and now won't display at all, other than a slight flicker when you first try to turn on. I have been able to back up the contents and have restored to factory settings. The battery is fully charged. There is about 20gb of memory space available. Please can anyone help in diagnosing the problem?

The screen has probalby died. Or the backlight.
You can look into getting it fixed but you may be at the point of comparing investing to fix an older device or putting that money towards something newer that will have a longer life.

My daughter has 2 websites she can not fully access because the iPad won't download updates for Adobe. What is Apple doing to solve this problem?

My daughter has 2 websites she can not fully access because the iPad won't download updates for Adobe. What is Apple doing to solve this problem?

Flash has been used for more than just displaying videos. The Vote choice your daughter found is one of those flash type sites that will not display on iOS devices. There are now over 100 million iPads, and who knows how many more iPhones out there. Developers who want their content to display on all these devices will have to move away from the old Flash technology.
There were some version of Flash that ran on other brands of tablets. But Adobe has stopped all development of Flash for all mobile devices. As time goes on and mobile operating systems evolve the no Apple devices will lose their ability to run Flash too. Web developers need to move on to cleaner, more efficient types of programming.

My ipad won't restore and i keep getting error code -1

itunes indicated a problem with my ipad today and suggested restoring the ipad. THe ipad is now in receovery mode and is trying to be retored. While going through that process, it seems that it won't update more than 15% before stopping with the following dialog box popping up:
The IPad "IPad" could not be restored. An unknown error occured (-1). I have changed USB ports, rebooted my computer, turned off the IPad and the result is the same every time.

Hello Darryl Drohomerski,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error-1
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
Best of luck,
Mario

My ipad won't stop resetting please help

What should I do if my ipad won't stop resetting please can I have help it has been resetting for hours and still won't stop please help.

IF THE ABOVE DOESN't WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

IPad won't stop checking mail

iPad won't stop checking for mail - it has been over an hour and still checking. Also my primary email does not pick up all my mail.

Thanks so much for your reply!
I should have also mentioned that I've deleted the account, did a reset, and even a restore (at apple's suggestion) and nothing has helped. I just finished reentering all the account info after the restore and it still has the "checking for mail wheel spinning". I have 15 iPads in this office and haven't had an issue with any of them expect this one.
It also has the "Load More Messages..." 29 messages total, 0 unread - at the bottom of the inbox, but it won't let me select it or "load" any more messages. It does send and receive emails just fine though. Slow, but fine.
Any other thoughts?!

My 1st generation iPad won't restore

My first gen ipad won't restore. It won't turn on, it won't turn off, it won't show the apple logo when I try to put it in DFU mode, and it won't show the 'connect to itunes' symbol. Basically it won't do anything that all the trouble shooting tips suggest!
When I plug it into the mains via it's charging dock, it flashes the apple logo every 10 or 15 seconds, but when I plug it into the mac it only manages to flash very weakly every 5 seconds or so.
After many attempts, I managed to get itunes to recognise that there was 'an ipad in recovery mode' but every time I tried to restore it, I got the message 'unknown error 1602' and when I looked this up, it basically said it was the same as about 10 other error codes and that all I needed to do was change the USB port and/or restart itunes and/or the mac and it would all be good.
I did all of these things several times and in various permutations but to no avail.
I'm not 100% sure of the operating system on the ipad (and of course I can't check at the minute,) but I'm sure it's iOS 5. something! (I did update regularly, or when prompted by the system, but haven't done it in a while because my wife uses it now.)
My itunes is up to date - Version 11.0.1
I know it's a long-shot but can anyone help?
Thanks
PK

I have a similar problem. But my iPad shows the connect iTunes screen and gives error 2001 when I try to restore it.
My iPad's battery was fine but I didn't use it for like 2 weeks. It's battery would've discharged and it turned off. When I tried to charge through wall socket, it got into the restart loop where it would show apple logo and turn off. So I did the simultaneous holding of Home and Sleep buttons for 10 seconds or more. It started showing connect to iTunes.
When I try to restore, the iTunes does the usual "extracting file" or something and go upto preparing for restore. But the iPad screen turns off from "connect to iTunes" and iTunes gives the error 2001, and the screen is back to connect to iTunes.
Also, if I don't plug in, the iPad seems dead, doesn't wake up or anything.

My iPad won't restore I've connected it to my mac, it goes thru the whole process of restoring and at the last bit my laptop tell me my device is no longer connected n on my iPad the apple sign comes up but the line doesn't load

please help ive tryed everything and i cant get my ipad to restore, ive discontecting it, defult starting it and no matter what my laptop keeps telling me that "this device is no longer connected " and on my ipad the apple logo comes up but the bar does not load please help !!!! i need my ipad for lectures

Hi rhiess,
Thanks for visiting Apple Support Communities.
It sounds like your iPad may not have restored fully. I'd recommend restoring it again with the iPad in recovery mode.
Use the steps in this article to place your iPad in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
After placing your iPad in recovery mode, use the steps in this article to troubleshoot the connection between it and your computer:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
If you still don't see your device in iTunes, follow these steps for Mac or these for Windows.
Best Regards,
Jeremy

Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. What do I do now?

Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. It was set up and has been in use for about a year. What do I do now?

I Have seen people report this issue when they try to sync their devices but in never seen it when trying to restore an unresponsive iPad. I would sguggest trying recovery mode now.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
This procedure will totally erase the iPad so I hope that you have a backup that you can restore from....assuming that it works, that is.

IPad Won't Restore into new Update 3.2.2 And Can't Do Anything Now...

Ok so my problem is when i plugged my ipad to restore and update to the new firmware update 3.2.2, everything was going smoothly, untill i got a error numbered 1014, Please help me i have tried everything many times, im trying to restore it in my macbook aluminum 2009 edition. Please Help Me.

Hi Everyone,
I too gave experienced this problem twice now (the first time with the upgrade to 3.2.1 then last night with the upgrade to 3.2.2). After reading this forum (& many, many others) & having tried nearly everything that everyone has suggested, it appears that several people had hinted at something that the majority of us have perhaps taken for granted.
It seems that if your iPad is not fully charged (& I REALLY mean FULLY charged), the chances of you falling into the never ending loop of the dreaded 'error 1014' occurring are increased! I seriously have nearly lost my mind & even after contacting Apple Care Support & spending over an hour on the phone (they were extremely helpful), we initially were unable to fix the problem & I was booked into my nearest Apple store for a repair/replacement.
After spending another 2 hours last night innocently attempting to update my iPad to 3.2.2, I saw that several people had recommended either disconnecting the iPad from the computer & plugging it into your Apple supplied power supply & letting it fully charge for several hours, or leaving it plugged into your computer (directly & not via a hub) & then try the whole process again.
Luckily, for me, this worked! I was not only relieved but absolutely astonished (& annoyed) that this was the only thing that worked for me! So my suggestion for those of you that may be experiencing this problem, give this a try. You have absolutely nothing to lose & hopefully you'll be able to update your iPad safely & correctly.
All the very best of luck

HT201263 i have tried to restore my iPad from my computer, but it stops ones it gets to the stage where it is updating the firmware. Any suggestion to fix this,?

i have tried to restore my iPad from my computer, but it stops ones it gets to the stage where it is updating the firmware. It will then display " there was an unknown error.....Any suggestion to fix this,?

Temporarily disable antivirus and firewall on computer.

My ipad 2 won't fully restore, it stops at about 95%

Similar Messages

Maybe you are looking for