My iPad 2 won't go to video mode in camera?

I took some pictures in camera and then tried to go to video but it won't go. Anyone have an idea why not?

How are you trying to change to video mode ? You need to slide/drag the Video Photo Square options so that the Video option lines up with the yellow dot to their left - is that how you are trying to do it and it's not working ?

Similar Messages

  • HT1430 ipad won't go into sleep mode

    ipad won't go into sleep mode, stays lite all night, litening to radio on it, but the screen used to go dark.

    Check Settings>General>Auto Lock and see what you have it set for.

  • How many minutes does the iPad 2 record in the video mode of the camera?

    How many minutes does the video mode on camera (ipad2) record?

    It should only restart once, see this article:
    iTunes: Restoring iOS software

  • Mi ipad mini is stuck in video mode after update.

    iPad mini stuck in video mode after update. Tried swiping photo every which way but loose to no avail. Thank you in advance for any help.

    Have you tried to give your iPad a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and see if that helps.

  • My ipad won't play short videos

    When I got my Ipad last christmas, it played videos.  Then it stopped playing videos but after an apple update the iOS it started playing them again.  I now find that they have stopped playing again and I'd like to know if there is a solution?

    It's possible the videos are flash, which the iPad does not support.
    or it may be requiring some other protocol that doesn't work on the ipad.
    I'd open a support ticket or check their support page and see if they have any insight.

  • Video mode on camera app keeps disappearing

    Hi,
    I'm owner of iPhone 5c and unfortunately I have experienced some issues with my camera app on iOS 7.0.3.
    Basically video mode keeps disappearing and the only way to get it back,is to restart the device.
    Anyone else experienced such issues?
    Please let me know if this is bug or hardware issue?!
    Thanks in advance

    What user troubleshooting have you tried? The user steps are restart, reset, restore from backup, and if needed restore as a new device. You have tried restart, since that is what you do when you turn the device on and off. A reset is done by holding the sleep/wake and home buttons together until you see the Apple logo and then release. Restores are done via iTunes. If you have to do the reset more than once, then I would suspect a software issue and I would try the restore. If after a restore as new, the camera still malfunctions, then make an appointment at the Genius Bar at the Apple store to have the device looked at.

  • Ipad does not. Revert from video mode to camera mode

    ipad 2 does not revert to camera mode from video mode

    Such a simple thing but not intuitive - thanks. It was driving me crazy!

  • My iPad won't download my video from iTunes

    Sometime ago I purchased Amaratine by Enya.  There was a music video called May It Be.  This is the song from the movie Lord of the Rings - The Fellowship of the Ring.  Lovely tune.
    A short time ago, a different video of the same name but a 16 minute documentary showed up on the iPad 2.  Now the original video will not download and I cannot think how to get it on my iPad.
    Does anybody have a fix?  Thanks in advance.

    That padlock icon simply means that you have the iPod set to automatically transfer music from iTunes. To remove it, you need to set your iPod to manual transfer.
    Has this message always been displayed, or is it a recent occurrence?

  • IPad won't go into Sleep mode

    After using an App made specifically for the iPad and then try to turn off/put my iPad to sleep, it does not react at all. If I then start an App which was designed for the iPhone, then pressing the button on the top of the iPad leads directly to the iPad switching to sleep mode.
    This does not happen with all iPad apps. Any ideas? I've tried it with several different iPad apps and it happens with some of them. All iPhone apps have no negative effects on the iPad sleep mode, which tells me that there has to be a problem with some of the iPad apps.
    thanks for the help.

    Try a cold reboot. Same as turning off the iPad except keep holding down both buttons (side on/off and top screen Home button) until you see the Apple logo (it will go through the "Slide to power off" thing first- keep holding down). It should reboot automatically when you let go after the logo appears. This can take some time so be patient.

  • IPad won't display any videos

    Hi all
    I am on the road and had been watching videos on my iPad for the past few days. Today when I clicked on the videos icon, instead of getting a library of videos I get nothing but a black screen. No videos, no buttons to press, nothing. When I hit the home button, it goes back to the desktop normally. When I go to the settings button, I can see that system memory is being used, so the videos are there on the ipad. I tried doing the home button/sleep reset a few times but that did not work. Any ideas as to how I can fix this while away? When I get home, what should I do to fix this?
    Thanks!

    It sounds like you already did a reset:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    If so, then I know of nothing you can do now. When you get to your syncing computer I would in order:
    - Restore from backup via iTunes
    - Restore to factory defaults/new iPad
    - Make an appointment at the Genius Bar of an Apple store.

  • My iPad won't stay in recovery mode

    I have an iPad 2 I forgot my password and no longer have the desktops used to sync my pad. I am trying to restore my iPad with my new computer but my pad will not stayin recovery mode. It keeps going back to the screen that ask for my password....

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • My iPad won't restore in recovery mode, why?

    Im trying to restoret and this is my 10th or 11th time ive been doing this! i really need help!

    Try using another computer.

  • Can i use my iPad to backup high definition video from my camera?

    I need to backup high def video from my canon 7d to free up card space.  If I export the video to my iPad (who h I can do daily using the cck) , can I re-export it to my MacBook pro without losing any resolution quality? Thanks for any fast responses to this one as I have wifi access for a few more hours before going to rural unconnected area. 

    Yes, you can do that.
    It might also be easier if you got an iPad Camera Connection kit, so you can plug the camera directly into the iPad.

  • Why is the iPad 2 not recognizing my video from my camera?

    have an iPad 2, camera connection kit, Canon T3i. I am trying to transfer video to the iPad 2 via the connection kit and an SDHC from SanDisk, why does it not play? It xfer's the pictures and they show up but all the video file says is MOV in grey?

    Hi Chombeh,
    If you are having an issue with the response of your touchscreen on your iPad, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT201365 Having uploaded iOS 7 I now cannot use my camera in video mode....any suggestions please?

    Any suggestions gratefully received. I now have ios7 on my iPad 2 but cannot use video mode when using the camera.

    http://support.apple.com/kb/ht1430Hello Grant1972,
    Thank you for using Apple Support Communities!
    I would suggest a couple things here.
    First, close all the apps that are open:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    From: iOS: Force an app to close         
              http://support.apple.com/kb/ht5137
    Then restart your iPhone and try again.
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If that does not fix the issue, reset the phone and try again
    Resetting your device
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    If the issue still persists, then I would backup and restore the phone in iTunes.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the very best,
    Sterling

Maybe you are looking for

  • How to create a pdf with the correct size?

    Hi there How do I create a pdf with the correct size? I created several albums and ordered them. Now I want to backup the album and I know how to create a pdf, but when I choose A5 it's to big, when I create my own size it's not the size it should be

  • Can I connect two actiontec mI424wr via coax?

    I have a new addition in my home, with an home entertainment area with poor reception from my current actiontec router.   I have acquired a second Actiontec off eBay that I want to connect to my coax in the new addition so I can add some "wired" ethe

  • FM RV_KONDITION_SICHERN giving dump

    Dear Experts, I am facing issue with FM RV_KONDITION_SICHERN, I am using this FM to create Material determination. This function module is being used within a Z function module. This Z FM is being use in ABAP proxy. The update is done using this FM i

  • Pages loose item persistence in frames

    I have these pages that branch to each other. This works fine, except when the HTMLDB pages are part of an intranet app and actually rendered inside a frame. When this happens, then my page cache is cleared even though I do not explicitly clear it wi

  • Bridge CS3: Lost Keyword 3rd Tier Hierarchy

    Wierd stuff happening to my Suite. PS went wonky so had to reinstall. Result is wonky Bridge. Lost 3rd tier of my keyword hierarchy. Have tried replacing xml file several times and Bridge automatically changes it each time. I also lost the buttons to