My iPad 2 won't start, should I take out the SIM card?

I am unable to start or restore my iPad 2. Would removing the SIM card help?

Not really. The sim card simply allows for connection to a cellular network. It should not affect how the iPad operates in any other way.
Though there's no harm in removing it. Just pop the tray.

Similar Messages

I reset my ipad1 to factory settings to put my apple id in instead of my dad's. Now we cannot activate it. We tried connecting it to itunes and to our wifi. We then turned off the ipad and took out the sim card and tried again. nothing worked. Please help

please help.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

HT4623 My husband just did the update for his iPhone 4, his phone is frozen with the iTunes page and a usb cable across the homescreen. He's tried holding down all the buttons all at the same time. can't shut it off. popped out the sim card, won't charge

We just did the iPhone update ios 6. The screen is frozen with the iTunes logo and a picture of a USB cale across the screen. none of the buttons respond.The phone does not recognize the apple USB when connected. We tried holding all the buttons down at the same time and also removed the SIM card and reinserted.

If it's not being recognized while it's in recovery mode in your itunes, try this
plug the phone into the usb attached to the computer
hold down the home and sleep/wake button on top simultaneously until the phone's screen goes black
When the screen goes black, release your finger from the sleep/week button on top but continue holding the home button until you see a dialog on the itunes screen on your computer that says 'itunes has detected a device in recovery mode'
then say 'ok,' select 'restore,' and say 'restore and update'

Hi, I need help. My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the battery for more than 30 minutes. Still won't power on. what should I do?

My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the batteries for more than 30 minutes (done this procedure twice) but it won't still power on. What should I do next? Could it be a hardware issue then?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Help ipad 1 won't start up ?

My Ipad 1 won't start up, after the apple sign I just get a scrolling circle in the middle of the screen. It eventually switches itself off. Any ideas what I can do or is it finished ?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

My iPad 2 won't start, screen stays balck even plugs into charger for 15 minutes. What can i try?

my iPad 2 won't start, screen stays black while plugged into charger. What can i try?

Hello Bfreilicher,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Best of luck,
Mario

My ipad 2 won't start

My ipad 2 won't start. Only the picture of itunes and the connector is on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

HT4059 I have a first generation iPad, iBooks won't start, anyway to reinstall it?

I have a first generation iPad, iBooks won't start, anyway to reinstall it?

If you are currently running iOS 5.01, you can update to iOS 5.1 over wifi (i.e., not connected to your computer).
 Cheers, Tom

My ipad air won't charge. I am using the correct cable supplied with it. I have restarted it and it still won't work.

My iPad air won't charge. I am using the cable suppied. It shows the charging icon for a split second then says not charging. I have tried re starting and nothing changes.

Z zoozx ,
How could Microsoft come up in a forum about an Apple problem? We have heard for years how superior Apple products are but we've never had as many headaches and problems with our Windows PCs over the years as we have with the Apple devices we now have. My wife has the most recent iPad and my son has the most recent ipod Touch. Earlier problems notwithstanding, the iOS 7 upgrade was horrible and hard to imagine for a device where the company controls all of the hardware and the software with no variants. As for Microsoft, I can say I have programmed on many various platforms from PolyForth to Unix to Windows and .NET. I think what many Apple users don't understand about Windows is the sheer magnitude of variables in making the software and all upgrades work for such a myriad array of hardware platforms and usage scenarios across an enormous number of partners and small to large enterprises. Anyone who has worked with a large integrated system can get a sense of this. I work in healthcare and our HIS system is rated #1 in it's class (built on a derivitive of an old MIT OS) but due to it's vast integration capabilities and the variety of usage and setup variables from site to site, it requires daily dilligence in error reporting and resolution across all of it's applicaitons. Microsoft Windows works and integrates with a massive number of other Microsoft client and server solutions that are used by the vast majority of enterprises in the world. It's no small feat to keep the Microsoft software stack in good working order. Of course everyone is entitled to their opinion but I wish we could past this ABM mentality that pervades online forums. I'm not sure if you've noticed but the Apple forums are jam packed with folks like yourself and me having problems with Apple hardware or software so I'm not sure where we can say one is better than the other, even if you could carve out some realistic benchmarks from which we could compare them on an even playing field.
With all the said, and I apologize but feel that the Anti MS anecdotes belong left long in the past, but any ideas on how we can get the supplied power cables to charge the devices they came with? I don't believe I've ever encountered a problem at the power cable level like this in which 2 cables are not working on 2 different devices. I think it points to software problems but as someone else mentioned about display settings, I'm not sure how your display settings affect the charging of a device in a non display mode. Would that suggest the thunderbolt cables are not capable of delivering enough charge to keep up with idle power consumption?

Firefox won't start. Everytime I end the process/close the last window, it keeps getting stuck at about 2500k memory in the task manager. (continued)

Firefox won't start. Everytime I end the process/close the last window, it keeps getting stuck at about 2500k memory in the task manager. The only way I have to fix it is to change some kind of compability settings or try and access it in a new way, and every time it crashes/closed/computer blue screens that setting will no longer work.
That is a short term solution, but eventually I'll run out of ways to access firefox successfully. I've tried many solutions, and some worked, but only once. I have yet to find a permanent solution for this problem.

First please update your plugins to make sure you are up to date. Shockwave Flash player has a newer version 16. In order to better manage the memory that Firefox uses please see these troubleshooting steps: [https://support.mozilla.org/en-US/kb/firefox-uses-too-much-memory-ram Firefox Uses too much RAM]
You also mentioned that Firefox crashes, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste those IDs into the "Post a Reply" box.
''' Note:''' If a recent Report ID does not start with '''bp-''' click on it and select '''Submit'''.
(Please don't take a screenshot of your crashes, just copy and paste the IDs. The below image is just an example of what your Firefox screen should look like.)
;[[Image:aboutcrashesFx29|width=500]]
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears

My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears

Boubert,
the question mark in the folder typically represents the inability to recognize a valid filesystem on the volume being booted from. You can try this, although it might not make a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to boot normally now?

My macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

my macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

It not polite to repost asking fro more help three minutes after initial post.
Recovery mode is Command & R keys after depressing and releasing the Power button for a normal startup.
OS X: About OS X Recovery - Apple Support
That only works for Lion and later.
What exactly happens when your try to boot to Recovery?
Try starting in Safe Mode resetting the SMC and NVRAM/PRAM
OS X: What is Safe Boot, Safe Mode?
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
What model MacBook Pro and what OSX version was on the Mac?
Have you tried booting from an OSX install DVD?
When you try to start doe the Power light light?
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac

Hello, i were updatin my ipad, and then when it wasnt finished i came to take out the wire, the thing that sits in the iPad and now i cant do anything, its totally frozen, what can i do?

hello, i were updatin my ipad, and then when it wasnt finished i came to take out the wire, the thing that sits in the iPad and now i cant do anything, its totally frozen, what can i do?

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My iPad 2 won't start, should I take out the SIM card?

Similar Messages

Maybe you are looking for