My ipad 2 wont upgrade from 5.1.1 to ios7. I keep getting the message software is up to date which it is clearly not
My ipad 2 wont upgrade from 5.1.1 to ios7. I keep getting the message software is up to date which it is clearly not.
I have followed the how to upgrade info but cannot proceed past software update.
I had no problems with my iphone 4
Your iPad doesn't have a camera!!.... Didn't you say your iPad was an iPad 2 ??
If your iPad is an iPad 2 then it will have a camera (front and back) and will be able to update to iOS 7.
The first iPad's last update was before iOS 6, and you said yours was saying 5.1.1 was up to date, then it is probably and iPad first gen not an iPad 2.
So to answer your question.... You can't update to iOS 7 because your iPad is a first gen not an iPad 2.
I hope this helped!!!! :D
Similar Messages
-
Trying to upgrade my iTunes to 10.5 but I keep getting the message "the URL could not be opened". What do I do?
Use this: http://appldnld.apple.com/iTunes10/041-2598.20111011.9Cp3o/iTunesSetup.exe
-
When trying to send photos I keep getting the message: "SMTP rejected the password" Why does this occur?
When SMTP uses passwords, usually the username has to be the e-mail address itself. Just the plain user on its own won't cut it for most SMTP servers.
-
How can I transfer a 18 minute video I recorded on my iPad camera app to email/youtube or vimeo? I keep getting the message the file is too long do want to send clips?
ThanksYoutube usually had an 8 minute length cap, which may be part of your issue. Also at 18 minutes that is probably a gig+ file size, which will also take a long time to upload and may be another part of the issue.
Edit it down as jim suggested. Or you may need to use something like dropbox, to get it off your ipad and onto a computer where might have more options to edit it down or size it down.
If it's just file size you can transcode it into a smaller file - a lower quality MP4 for example. If it's the length that's an issue for youtube, you'll need to break it up into a couple different files and upload part 1 and part 2 -
I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.
Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.
Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update. -
recently reinstalled Acrobat 9 pro. Got serial number from adobe. Now keep getting the message upgrade. No 9 in dropdown. Then tells me to enter serial or only have 22 days left. Reinstalled 3 times.
Can anyone help please?Sorry that you got such a hassle. Try this. I don't have Acrobat 9 per se, but I have the TCS2 and found the following.
Run Regedit (all the serious warning apply here. Look but don't touch).
Under HKEY_LOCAL_MACHNINE->SOFTWARE->Adobe->Repair->Adobe Acrobat->9.0->IOD Look under the entry under SERIAL.
Maybe it works maybe it doesn't. But it might help.
Message was edited by: MichaelKazlow -
after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe -
See the title
I keep getting the message "mail cannot connect to the server…." when it clearly can and does. How do I prevent these messages from appearing?
helpOn your iPad or a Mac?
You posted in the iMac community but your profile indicates an iPad 2. -
I keep getting the message that the calendar cannot be synced because the sync server failed to sync the ipad. How can I fix this?
Have you previously synced photos to your iPad ? If so try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
In terms of iOS5, what version of iTunes have you got on your computer ? You need iTunes 10.5 to be able to download iOS 5 -
How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!
Are you installing from the official site? http://www.mozilla.com/firefox
If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/ -
I updated my new iPad to the iOS 6 while connected to wifi. However, it will no longer connect to the 3G network. I keep getting the message "could not activate cellular data network" even though the 3G symbol appears normal. I have tried rebooting, but it still doesn't work. Please help!
No. You can't
-
Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried getting a new installer file, but get the same message every time.
K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall. You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.
-
I have a new MacBook Pro. I keep getting the message "Mail would like to use your keychain "login". How can I make this stop? I have run the keychain repair utility.
Hi,
With the Finder as the Front app go to the Go Menu > GO to Folder.
Copy and Paste the bold text below into the text field
~/Library/Keychains
Highlight the Keychain.
Use the CMD + i Keys together (Keystrokes for Get Info from the File Menu)
In the Info Panel that appears check the Ownership and Permission bit at the bottom.
Example Pic
Unlock Padlock
Check your Shortmname Appears (the (Me) one).
Open the Cogwheel icon
If it is Greyed Out to "Make "Shortname (Me)" owner then you are the Owner.
Check you have Read and Write Permissions.
You may need to check the Ownership and Permission on the ~/Library itself (you can do the same Get Info on Folders as well as Files)
If you don't Own it then, when you have changed that also Apply to Contents.
10:12 PM Tuesday; August 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Maybe you are looking for
-
i am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial
-
I bought a Mac Book Pro 15 and after a week of using it it doesn´t start. I receive the message no bootable deevice. Is it possible to get into the EFI to change the boot disk?
-
Hi experts, i am trying to send customer number to other system..i am not getting no errors...but status 30 is coming in outbound idoc like "receiver exits,field conversion,filter exits....." this is warning... can any body tell me
-
Command recall within ksh on Solaris 10
Is is possible to be able to use command recall keys with the Korn Shell within Solaris 10? Thanks, Brett
-
Don't have permissions to restore
I installed Snow Leopard from scratch. I have been able to restore all of my files and shared files with no problem. However, when I try to restore my wife's files into her profile, I get an error message saying I don't have the permissions to do so.