My iPad 2 worked perfect before updating to iOS 8, now all it does is power cycle, even after restoring
How can I downgrade to iOS 7? I believe iOS8 is my problem.
You can't but you can try updating to iOS8.1.1 which has fixed many iPad2 users issues.
Cheers
Pete
Similar Messages
-
my Iphone 5s was working perfectly before downloading the IOS 8.0.1 and later IOS 8.0.2. When my Iphone run out of battery, I connected it to Itunes, however the phone never turned on, and kept trying to sync, however got an itunes failure message.
Any help in this regards please.Hello douraid,
Start with the article below to get your iPhone to take a charge. Once you get it powered back on, you will want to sync again to make sure nothing was lost during the attempted sync.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
-Norm G. -
Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.
Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry -
I bought an Ipad 2 some years back and never hooked it up to my computer (somehow). I was now to update the Ios on it, but when doing that I lost all the music I bought in Itunes.
When trying to buy it back it states "you have already bought this item".. Is it any possibillity to get this music back? I've used quite a lot of money on all that music and it is no fuin having lost it.iOS: Device not recognized in iTunes for Windows
-
My Ipad worked perfectly but one day it would not power up and hasn't in a couple of weeks. I have tried the tips on line and have put it on the charger but the screen remains black.
I suggest booking an appointment with the genius bar, there most likely is a hardware problem with the iPad. Apple will replace the iPad if it is in warranty. If it isn't in warranty they will still replace it with a price
-
I updated adobe flash and now all it does is crash can anyone tell me how to fix this?
I update adobe flash and now when i play games the adobe flash crashes does anyone know how to fix this problem
These latest Flash is corrupted. Adobe has acknowleged the problem. The following Adobe Forum message may be of help to you:
http://forums.adobe.com/message/6288150 -
I set my iPad to do the latest iOS update as per usual - over the air and while on charge. When I returned to it, it was non functional the screen was blank. I reset multiple times and at one point got a red screen. I connected it to iTunes on my Mac and tried to force a restore, but this didn't work - even in DFU mode. I have gotten a 4013 error every time. I've tried different cables and different USB ports etc, but no success. It's a brick.
I have multiple Macs around the house and have tried all of them - all with the same results alas. I've restarted, ensured iTunes is up to date etc too.
On DFU mode - yes - that's it. I have no idea what DFU stands for, but it this mode is often referred to as this. I get the 'connect to iTunes' picture and can begin the restore, but the process times out waiting for the iPad. Apparently, 4013 is associated with a cable problem,, but I know the hardware is all fine.
What I want to avoid is just being told to buy another iPad. That would be totally unacceptable for an error caused by an update to a 16 month old device. There has to be some solution! -
Why is my iPad working slower since updating with IOS 7
I have recently uploaded the new update for iPad and it is now significantly slower and I liked the old themes better,this latest update has made downloading and surfing really slow anyone else experiencing this or is it just me?
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
I can sync my contacts, but get the same error msg each time I try to sync my calender (which is crucial for me). Error msg is: Unable to process organizer data
I've looked in the BlackBerry Knowledge Base and their Resolution is:
This is a previously reported issue that is being investigated by our development team. No resolution time frame is currently available.
Any suggestions from the BB Forum would be appreciated!
Thanks!Java_Junkie8121 wrote:
Just wanted to let Adobe know.
This is a user-to-user forum; if you want "to let Adobe know" you have to go through other channels, e.g. a bug report at https://bugs.adobe.com/flashplayer/ -
worked fine with 3.6
updated to 4
tried uninstall/install plugin
.dll downloads
disable/enable different plugins
next step is format?I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
IOS 7 updated and now phone will not get off the connect to itunes screen
Connect to itunes on your computer and see if it prompts you to restore or activate. Try resetting the device by holding the sleep/wake and power button for 10-15 seconds then release. If that pesky screen still shows you may need to force recover the device. Power the device completely off, press and hold the home button and plug into itunes and do not release the home button until it says itunes has detected a device in recover mode.
-
Purchased an eMac from Dawson Springs Independent School Systems.
I tried to update after getting it to run.
After upgrade started screen went blank.
Now it has a blue screen with an apple Mac OS X
Can someone tell me what I did wrong? or how to get my emac usuable?Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
The volume (name_of_volume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more. -
I just updated my IPOD touch, now all my apps are gone and I cant restore them. Please help
I just updated my IPOD touch. After updating all my apps that I've downloaded are gone. I tried to reload some but the app store shows then already installed. How do I put the app back on the touch. please help Thanks Scott
Redownload them at no cost. See this article for more details.
http://support.apple.com/kb/ht2519
B-rock -
my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is dead
If it is one year old minus one day it is still under warranty. If it is more than a year since you purchased it then yes, the warranty has expired.
Millions of iPads have been sold. Most continue to function long after their warranty has expired. Check the many requests about updating the iOS on the original iPad on these forums and you'll see that there are many iPads still working after three years. My iPad 2, which I had for over two years is still working well for my son in law who took it over from me when I bought a new one.
Given that there will always be a few iPads that fail early. Most of those will be covered under warranty. But some will fail after the warranty has expired and before the owner expected it to. I'm sorry to hear that you are in this category. Take your iPad to an Apple store and have it looked at. They will provide you with alternatives, one of which is to purchase a like model to the one that failed at a discount. You can then know your options and make the best choice for you. -
Since i updated my 3gs i have no wifi connection. How can i fix this bug?? My ipad works perfectly good
Here's a troubleshooter:
iOS: Troubleshooting FaceTime and iMessage activation
Maybe you are looking for
-
What I want to do is as in the following. 1. Load image from jpg/bmp file and display on the PictureBox or any other image control keeping image ratio 2. Perform Image Processing, for example, zoom in/zoom out, change brightness/contrast Does any .NE
-
Problem with creating bookmarks (word- pdf)
Index entries between section number and heading in my word document prevent the creation of the section number in the PDF bookmarks. I'm using Adobe Acrobat 9 Pro (9.4.5) and Microsoft Word 2007. Does anyone know the problem, and more importantly, d
-
Hi I have a client in a single location with around 30 employees. They currently have Covad full T1 and VOIP running through a couple of Cisco managed switches. Right now I have them using a Netgear FVS114, which is pretty stable. I connect through a
-
I want to play games on my computer but don't find bootcamp comfterable becuase i don't like to partiton my main drive. SO i have been looking at crossover games and it looks good but complicated. I have a 21.5 inch 2.66 ghz, 2GB iMac. gmaes like De
-
A silly thought on the initial back up.
maybe im thinking about this to much....but it seems like the initial backups i have done really slow down every hour. is time machine trying to do an hourly back up during this looooooonng process?