My iPad 3 always shows 100% battery

My iPad 3 always shows 100% battery and suddenly it gets off post complete discharge.

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Similar Messages

  • Lenovo K 900 --Battery charge indicator always shows 100 %

    A strange issue after firmware upgrade in lenovo K 900 , When I charged to 100  % , the phone always shows 100 % charge . It is not getting updated and after using for 6-7 hrs the phone gets switched off without any notice . Now I can charge again and this time the battery charge indicator shows correctly . but again the same issue is seen if the phone is charged to 100 % .

    Let it die all the way down, to recalibrate the battery, and then fully recharge.  See if that helps.

  • Magic Mouse battery always shows 100%

    Since upgrading to Mac 10.6.7, The preference window for the magic mouse always shows 100%.
    After installing MagicPrefs free drivers, (because Apples' sensitivity settings suck), MagicPrefs show
    a more accurate level of 84%. What gives here Apple? Are you letting the competition beat you at
    your own game? I'm getting disgusted with Apple's lack of support, fixes and updates to reported problems.

    From my troubleshooting, it seems it's specific to the individual mouse.
    I have two Magic Mice on my desk, one for a MB Pro and one for an iMac.  The "trouble" Magic Mouse, which always shows "100%" AND frequently disconnects, did so in 10.6 and 10.7. on my MB Pro.
    I thought maybe the Bluetooth module on my MB Pro was bunk--so I swapped mice and took the "stable" Magic Mouse on the iMac and paired it with my MB Pro--no problems.  The "trouble" Magic Mouse, formerly on the MB Pro, now on the iMac--exhibits the exact same problems--it seems to be the specific mouse, not the OS or Bluetooth modules on either host computer.  Hope this helps.  I guess I'll be making a trip to the Apple Store to see if they can fix/replace my "trouble" Magic Mouse...

  • My mac wireless keyboard always shows 100-percent charge when its not

    How do I allow my iMac to correctly show the battery level of my Mac wireless keyboard?
    It always shows 100-percent, which is wrong most of the time.
    It reads and shows my Mac wireless mouse battery level correctly.

    It's a bug.

  • My PSAPTEMP tablespace always show 100% Full or Used

    Dear All ,
    Using brtools my tablespace PSAPTEMP always show 100% full or Used, I extend 2 Gb size in PSAPTEMP tablespace but still no solution
    Please guide me why it always shows 100% used and what is the performance impact on that
    Regards
    Shahid

    Hello Shahid,
    > Please guide me why it always shows 100% used and what is the performance impact on that
    This is a normal behaviour in case of a temporary tablespace.
    If you do sorts, hash-joins, etc. which can not be done in memory-only you allocate extents in the temporary tablespace. If you finish your query, that temporary extents will be marked as free but they still kept allocated. So over the uptime of your database your temporary tablespace will be filled by allocated (but marked as free) extents .. and so you will see it as "full". You can also check the current "real" usage of your temporary tablespace by the view V$TEMPSEG_USAGE:
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2164.htm#i1421319
    The temporary extents will be deallocated by a database shutdown or by a database start, if the database crashed before.
    If you don't get any ORA-01652 by your query .. everything is fine.
    Regards
    Stefan

  • IPhone 4S will either show 100% battery or dead battery right before shutting off, nothing in between. Has iOS 7 now after restore and is continuing to do the same thing as when it has iOS 6. Frustrating, like not having a fuel gauge on your car!!l

    iPhone 4S will either show 100% battery or dead battery right before shutting off, nothing in between. Has iOS 7 now after restore and is continuing to do the same thing as when it has iOS 6. Frustrating, like not having a fuel gauge on your car!!l. Purchased around March of this year so not very old, never wet, damaged, etc.

    Read:  http://www.forbes.com/sites/larrymagid/2013/09/27/how-to-preserve-battery-life-i n-ios-7/?partner=yahootix

  • My Ipad has been unplugged for 10 hours, but it is still showing 100% battery power, I did update to iOS 6 on release day.

    Is this just a bug in the new iOS for iPad 2? Cause I also updated my iPhone 4S to iOS and it shows proper battery levels. Any one else having this issue? If so is it a known issue?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
    Also, just use your iPad until it drains of power and then recharge it. It might sort out the glitch!

  • Why does my trackpad always show 100% in system preferences?

    I read where someone is having the exact problem but with the keyboard instead. A widget was suggested as a work around but is it a problem with Lion or is there something else I could do to fix it. Thanks

    nrg2go wrote:
    You know what forget it. There ain't much reality to reproduce.
    It always reads 100% period. It never changes.
    I can only hope Apple read these things and look into it.
    Thanks anyway.
    Do try uk-max's suggestion. Othewise, keep an eye on the battery level that does work so you don't wind up with a dead battery and can't re-pair it (because the battery is dead.....).
    FWIW, Apple is aware of the issue; I sent in a bug report - I've heard of several being stuck at 57%, some at 100%. On mine, it was always the wrong percentage showing in the Bluetooth menu bar.
    For anyone else: we are not discussing laptop batteries, but the battery level of the magic trackpad (or mouse, for that matter) - both are bluetooth, both have batteries, and there has been a problem showing the correct battery level for both.

  • Power manager always shows 97% battery remaining

    Hi,
    it always shows like that even though I plugged in AC adapter for hours. I tried to restart windows (Vista) but it's still the same.
    Any suggestion?
    Thanks!

    optimise for lifespan usually don't ever allow the battery to charge to 100%, fully charged and fully depleted are the two states of the battery least want to be in. If you select always charge to 100% and start Charging at 96%, then your battery will go to 100%, but that mode can shorten your battery life by as much 20% or more depending on usage pattern (i have tried various modes in my different thinkpad laptops, so this is from personal experience).
    I personally like to start charging say below 80 to 90 % and stop charging at 95%, but personal preference only.

  • HT4060 Hi when i connect the ipad it is showing the battery outline with red stripes and no charge signaling and the display alternates between the battery outline and apple logo. Kindly help

    Hi
    When I connect my ipad for charging, it is showing the battery outline with red stripes at the bottom and the display alternates between this picture and the apple logo. This happened when i connected to the main power and also when tried charging through my macbook. Please help.

    First step is a SMC reset:
    http://support.apple.com/en-us/HT3964
    Your font is a bit excessive.
    Ciao.

  • My ipad wont wake up?  When I plug into my mac it shows 100% battery and all my app's? What is going on.

    My ipad all of a sudden won't wake up?  I plugged it into my mac desktop and it shows it as if it is awake, all my programs are intact, it updated and sinc'd, but no response when not plugged in.  How do I wake it up? Do I need to reset it or something or is there a light in it that can be replaced?  No idea what is going on.  No damage or drop has occurred. 

    http://support.apple.com/kb/ht1430
    Try the additional infomation section to hard reset the device and see if this resolves it.

  • Magic Mouse Battery Level Always Shows %100?!?

    Hi,
    I'm using Mavericks and I still have this bug. I tried unpairing and pairing it again but didnt work. Any suggestions?
    (Please dont suggect me to use anotuher 3rd party software...)
    Thank you

    1. Rechargeable batteries are different: the voltage stays practically the same untill the end of the charge, then they steeply fall to "empty".
    2. You may have a not too healthy battery (happens sometimes). When the magic mouse or the cordless keyboard do not work well, changing the battery for a new one often solves the problem, even if the battery inside is "full".

  • Thinkpad T420 GPU usage always shows 100% in Power Manager

    Did anyonce face the same problem before?
    Mine was a i7 2620M+HD3000 T420. When I open the power manager, I fount my CPU usage is around 30~40% and my GPU uasage is 100% stable... I didnt open any game when I open the power manager. Anyone know whether its ok?
    BTW, when I watch film on this laptop. The CPU temperture could raise to 90 celsius...

    Hi there!
    What you describe is not normal behaviour, something is running in the background and is using up resources.
    I suppose you are running Windows 7? You can search for the process (program, driver etc) that is causing the usage if you press CTRL+ALT+DEL and select "Task Manager". On the tab "Processes" select "Show processes from all users", then click on the header "CPU" to sort them by CPU usage. See if you recognize the name of the process that is using up your CPU/GPU resources, it might be an antivirus or, conversely, a malicious program. Upload a screenshot if you can.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • My iPhone 4s always reads 100% Battery and then crashes

    Help!
    My iPhone 4s is completely up to date, I have done a complete reset, and a hard reset... multiple times.  My battery gague won't waver from 100%, and then it crashes.  When I try to charge it, it gives me the "plug in" picture, indicating that it is fully charged when it crashed seconds ago.  What else can I try?

    The best bet there would be to maybe try to wipe the phone and then reset it from a back up in iCloud or iTunes. If that does not work you should take the phone to the apple store and they will, if you are still in warrenty, replace it right there.

  • My iPad 2 always shows "no sim installed" I have tried all options

    My ipad2 shows " no sim installed" from time to time it works after restart then it comes up again after a while I don't know if it is hardware or software issue plus that I have changed my simcard & I still have the same issue can anyone help?

    I'm glad to find others also experiencing the 'no sim card error' issue...
    All that seems to works for me, taking from what someone said above, is flicking in/out of Flint mode ...to get it searching for networks.
    Has anyone discussed this matter with Apple?
    I will no doubt raise it myself, but thought pointers from another's experience will come in handy!
    Regards

Maybe you are looking for

  • HT1198 unable to share libraries with multiple users

    I read thru and followed directions on how to share using a disk image, I was able to copy my iphoto library to it and select it to open on my account, I set permissions to read and write for both other users and ignored ownership on that driver. it

  • FCP X doesn't display iMovie clips correctly in Event Library

    I have 10 years of clips that are setup by year/date in iMovie. Although I had imported most of the media in 2009, iMovie seems smart enough to read the actual file metadata and find the media recording date, which is prior to the import date. As a r

  • 1394 adapter from analog VHS-C to Premiere

    I've got a job to copy video from some old VHS-C tapes to DVD. I hope that I can use the 1394 ports (FireWire)  on my motherboard or USB 3 for receive analog signal from the camcorder. Which adapter should I buy to be sure that it can be used to Prem

  • Transfering Logic files to New User

    Hello All, Im trying to transfer the files from old user to NEW one ,out of all my files my Logic data is MOST important , aslo my motu since i run it with Logic, any thing i should really make sure i do ?? as far as Prefs , ive never done this, and

  • I forgot my security questions; how can I change them when I can't seem to use my rescue email?

    So I've forgotten my security questions, and for some reason there is no option for me to use my email to change them when editing my apple ID, though many other users seem to find this solving their problem. Is there some other way I could do this o