My ipad 3 dosenot have passcode how can i set one ??

my ipad dosenot have passcode how can i set one ??
i did not find the passcode set option under Setting > General icone ???

And when you enter a passcode, write it down...there are several users a day who have forgotten their passcodes and ask how to reset them.

Similar Messages

  • How can I set one loop's frequency as a slave of another loop ?

    I have 2 loops in parallel. The first runs at 500Hz. The AIread controls the frequency. How can I set the second one at 100Hz ? It is very easy to set it with local variable, but really not clean. The second loop must not use the CPU while waiting the next 100Hz tick. Is it possible ? I am trying to use occurrence, but the second loop will always (I think) use CPU while waiting next tick !
    Is it possible to set one loop in one thread and the other one in another thread ? Then set each thread to a CPU (I use a bi-xeon PC)
    Thanks

    cariboo wrote in news:5065000000080000001EBE0000-
    [email protected]:
    > I have 2 loops in parallel. The first runs at 500Hz. The AIread
    > controls the frequency. How can I set the second one at 100Hz ? It is
    > very easy to set it with local variable, but really not clean. The
    > second loop must not use the CPU while waiting the next 100Hz tick. Is
    > it possible ? I am trying to use occurrence, but the second loop will
    > always (I think) use CPU while waiting next tick !
    > Is it possible to set one loop in one thread and the other one in
    > another thread ? Then set each thread to a CPU (I use a bi-xeon PC)
    > Thanks
    One solution is to place a case inside the loop which run at 500 Hz. Put
    your 100Hz code inside the True case. Use the "Quot
    ient & Remainder"
    funtion and the iteration counter to execute the true case every fift
    execution of the 500Hz loop.
    This may not work if the 100Hz code use to much time, it will then delay
    the 500Hz loop.
    I would go for the occurences solution. The wait will use some CPU
    resources while waiting but i don't think that should be any problem (when
    done correctly).
    Rolf

  • New iPad asking for passcode but I never set one - how do I unlock a code never set?

    Just got my new iPad yesterday, have no kids or anyone else around who would mess with it while I'm in another room - go to wash the dishes, come back and it's asking me for a passcode to unlock. I had it running all last night - turned off, turn on, sync with macbook pro, blah blah blah, everything is great until tonight. What's going on? How do I unlock it? 

    Is your iPad new in the sense of being brand new or is it the latest generation?
    If you do not have very much on it you could connect it to iTunes on your computer (if you use one) and on the screen that pops up starting with the Summary tab click on the Restore button further down. Be sure to set it up as a new device? You will lose any saved data but at least it will unlock your device. Alternatively, you could could do it through Settings on your ipad. Either way, you my have to redownload your purchased apps again.

  • HT5012 How do I know what iPad I have. How can I tell what it's is if it is a iPad 2 ,3,4

    Help

    Identifying iPad models
    http://support.apple.com/kb/HT5452?viewlocale=en_US&locale=en_UShttp://support.apple.com/kb/HT5452?viewlocale=en_US&locale=en_US
    Identify Your iPad
    http://www.ifixit.com/Info/ID-your-iPadhttp://www.ifixit.com/Info/ID-your-iPad
    For information on your iPad (model, date of production, etc), enter your serial number at this site. Information, based on the serial number, will be shown.  http://www.chipmunk.nl/klantenservice/applemodel.htmlhttp://www.chipmunk.nl/klantenservice/applemodel.html
     Cheers, Tom

  • Did not have adisk how can i set up my printer

    J310a  CN15H25RDB05HZ

    Hello  larry66,
    Please use the below link to download the software for  HP Deskjet 3000 Printer - J310a
    Software
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • What is the default identity store - and how can I set it?

    Hi,
    I'm running Webcenter on WLS, and using WLS and JPS for the authentication of users. On the WLS Console, if I go to Security Realms -> myrealm -> Providers, I have a list of four different providers.
    If I understand correctly, these four providers are my identity stores. How can I set one as the 'default' identity store? Or see which one is currently the default?
    The reason I'm asking is I have the following code in Webcenter to create a new user in the Active Directory:
          // Get the default identity store
          IdentityStore idStore = WCSecurityUtility.getDefaultIdentityStore();
          // Get the user manager object
          UserManager usermgr = idStore.getUserManager();
          usermgr.createUser(loginName, password.toCharArray(), propertySet);So I have a utility Java class which gives me the "default identity store". Now I want to change the WLS configuration so that the Active Directory in which I want to create new users is the "default" identity store.
    Thanks in advance for any help,
    Ludovic

    Hi,
    Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
    OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
    1.    Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
    2.    Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
        REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
        Again, this subset (of LDAPs realizing the maximum flag) is not empty.
    3.    Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
    Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
    Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
    Or do they mean "the first in the list on the WLS Console"?
    Best regards,
    Ludovic

  • My iPad has been disabled due to wrong passcode which I have forgotten,How can open it again?I'm so desperate right now

    My iPad has been disabled due to wrong passcode which I have forgotten,How can open it again?I'm so desperate right now

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • Ipad is disabled connect to itune, my friend entered the wrong passcode , but i know my passcode how can i fixed it without loosing data

    my friend entered the wrong passcode , but i know my passcode how can i fixed it without loosing data

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have an iPad with IMAP email accounts set up but I can find no "inbox, drafts, trash" folders anywhere, either on my ipad or desktop Mac.  How can I set them up?  They do not show on my MacMail preferences either and I can find no way to add them.

    I have an iPad with IMAP email accounts set up but can find no "inbox, drafts, trash" folders for each email account anywhere on my iPad or in Mac Mail.   How can I set them up? I can't find anyway to set them up anywhere.  Thanks

    Hello blu monkey,
    I found some resources that I think might help with the visibility of your IMAP email folders on your iPad and Mac.
    On your iPad, you may need to follow the steps in this article to make sure your folders are visible:
    iOS: If IMAP Mail folders are not visible
    http://support.apple.com/kb/HT1393
    On your Mac, I am not sure if you have the sidebar enabled, but you can enable it using the steps in the article below.  When this is showing, you should see your email account listed near the bottom with a triangle next to it.  When the triangle is pointing down, it should show your folders:
    Mail (Mountain Lion): Show or hide the sidebar
    http://support.apple.com/kb/PH11763
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number.  We all have an iPad and all use the same apple ID as iPad the bill.  How can I remove their numbers and add mine?

    I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number.  We all have an iPad and all use the same apple ID as iPad the bill.  How can I remove their numbers and add mine?

    Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

  • 1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    HI Frostyfrog
    CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
    it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
    I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
    The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
    Good luck

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

    How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

    In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
    How to sync

  • I am so confused about iCloud.  My husband says he never set it up but all is information is on both his iPad and iPhone.  How can that be and do I have to have iTunes Match?

    I am so confused about iCloud.  My husband says he never set it up but all is information is on both his iPad and iPhone.  How can that be and do I have to have iTunes Match?

    "All his information" may or may not include things customarily stored in iCloud.  Perhaps all the information is on both devices because they were both recently synced using the same iTunes sync.
    Do you have to have iTunes Match?  No.  Many folks do not have iTunes Match.  The music purchased from iTunes is always available to the purchaser.  Other music is stored in iTunes on the person's computer.

  • I have Keynote on my iMac and iPad. I created a presentation on my iMac...now I want to move it to my iPad for presenting.  How can I do this.  (I do have Lion.)

    I have Keynote on my iMac and iPad. I created a presentation on my iMac...now I want to move it to my iPad for presenting.  How can I do this.  (I do have Lion.)

    Goto bottom of scren in iTunes there is a section called sharing when it is connected to your computer. The sharing section lists those apps where data/files can be directly imported via syncing. Click on the app you want to transfer and then add the file.

Maybe you are looking for