MY IPAD 3 HAVE SOME SERIOUS PROBLEMS

Hello Everyone
I have a 16gb ipad 3 and it got problems , since i updated it to the new version i had some serious problems ,
My ipad will not turn on when it plug in to the charger that on the wall or my ipod dock that i normally charge it on , it come up with the battery signal when it on charge and in the battery signal theres red lines through it and it goes to the apple logo after that it turns off and starts it again , ive reboted it , ive downloaded itunes agian to restart it that way but it wont come up on it at all . it starting to **** me off .. it has run off the 9o days or so period .. my last report that is to ring them to see if they can help . My ipad has a lock on it too and it has never done this before .......
Thanks Everyone
From Australia xx

Hello Krystal,
I would be concerned too if my iPad was not charging. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below (these steps refer to an iPhone, but the steps also are relevant for an iPad):
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Once you get your iPad running again, follow the steps in the article below if you do not recall your passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

Some serious problems with Mountain Lion

Hi everyone,
I upgraded my mid 2010 15" MBP to Mountain Lion 2 days ago, and I have some serious problems with my machine now.
- Wifi problem: like many members 's machines, mine has problem to connect to the wifi after sleep or restarting, I had to wait 10 to 15 minutes for it to connected to my home network. Anh I tried to remove all of my settings in System Preferences/Network and added new connection. And now it cant connect to wifi anymore. I'm writing this article while sitting on the floor with my Ethernet cable plugged in my MBP. I connected to internet through a DSL modem and a Airport Extreme as a bridge and Access Point. I also tried to set up all of my network device but my MBP can't connect to the wifi still.
- Keyboard problem with Pages: I was very happy with the new iCloud syncing for Pages documents but after 5 minutes, I met a big problem with Mountain Lion. Whenever I type in Pages with Vietnames Keyboard( Mac OS X built in or from another developer: http://www.trankynam.com/gotv/ ), Pages stops working immediately. I can still drag the Pages's window around but can't type or do any editing. After that I have to force quit pages. It is really stupid that I'm writing a book in Pages and now I have to stop my working till apple fixes this ridiculous bug. I tried German Keyboard as well and Pages worked flawlessly. Do you hate Vietnamese, Apple?
- Messages problem: Since upgrading to Mountain Lion I couln't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
Apple, please test your software more before release it. I feel like I have no computer at the moment because I can't work, can't surfing the web wirelessly and can't communicate with my friends.

HI,
- Messages problem: Since upgrading to Mountain Lion I couldn't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
What Messages to what type of Buddies or Contacts ?
This
I found out that the problem with my wifi was my MBP received automatically a ridiculous IP such as 169.254.170.0 instead of 192.168.1.4 as it should be.
WIll be part of the Issue as will be DNS issues.
mDNSresponder crashed with Handsoff! v1.5.3. After upgrading Handsoff! to v2.0.2, it works again.
In this case mDNSresponder also being stopped will stop DNS working.
I would guess if you have resolved these that you can Chat to people again.
4:33 PM Friday; July 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can speak or response me in thai language
1. ผม อาคเนย์ พำนักอยู่ประเทศไทย กรุงเทพฯ มีปัญหาสอบถาม ดังต่อไปนี้
- กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
- ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
ขอบคุณครับ
อาคเนย์ อุดปิน
กด
<Edited By Host>

Google translation:
พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
http://www.apple.com/emea/support/itunes/contact.html

My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN

HELP ME I have a serious problem on my macbook pro HELP ME

I have a serious problem on my macbook pro, after I made this tutorial this link:http://tonymacx86.blogspot.com/2010/01/tweaking-your-system-install-chameleon.ht ml, I could no longer install windows on mymacbook pro, already tried everything, according to my knowledge. already formatted, re-formatted, reset EFI, PRAMetc., nothing worked. Ever tried installing on different operating systems, versions of Windows 32 and 64 also, nothing worked.I'm sure that something strange aocnteceu after this tutorial I did,because before I was usually running windows on my mac. The error appears to me is: "Can not partition this drive because some files can not be removed." Sometimes I can go, but time to install windows and choose the partition BOOTCAMP, I get a message saying that the exclamation windows can not be installed on this partition, but maybe my BIOS is not supportedfor this installation. PLEASE HELP ME I'M DESPERATE AND NOT KNOW WHAT TO DO MORE. WAIT HELP
RICARDO

I did not know that the chameleon installation was just for Hackintosh, was lack of attention, my bad!!! I will try your method now. In a moment I'll tell you if it worked.
"My hd"> library> preferences> SystemConfiguration>com.apple.Boot.plist: This way is correct?????
Content of my "com.apple.Boot.plist:
<? xml version = "1.0" encoding = "UTF-8"?>
<! DOCTYPE plist PUBLIC "- / / Apple / / DTD PLIST 1.0 / / EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key> Kernel Flags </ key>
<string> </ string>
</ dict>
</ plist>
NOTE: When I did that tutorial I do not modify this file "com.apple.Boot.plist"
Wait reply.. Tks !!!

HT5622 hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem!

hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem! and in the billing info there is pop-up box saying i have accessed my account from didfferent computer but no i have been doing it from the same pc. please help me out.

Tap Settings > General > International. Make sure the Region Format is correct.
As for your Apple ID. Tap Settings > Store > Apple ID > iForgot
Resetting your Apple ID may help.
Congrats on your new iPad !!!

My brand new ipad 2 have some uncomfortable delay on its photos apps

My brand new ipad 2 have some uncomfortable delay on its photos apps when i try to slide to next photo, it shows me a confident jerky and choppy. and it never happend on my ipad 1. it seems to happen lots of ipad 2 users.
and there still exists those problems on firmware 4.3.2
I couldn't believe that my brand new ( even set A5 dual core and 512 rams!) ipad 2 made this kind of delay.

Have you tried logging out of your account via Settings > Store and logging back in and seeing if that makes any difference ? You could also try a reset and see if they download after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If an app is over 20 meg in size then you won't be able to download it over 3G, you will need to either use wifi on your iPad or download it to your computer's iTunes and then sync it across.

Can I use a mini dvi to video adapter on my Macbook 7.1 of have some compatibility problems?

I have a Macbook 7,1 and I want to buy a mini dvi to video (s-video and rca) to plug my macbook to my analog TV.... I want to know, if this have some compatibilty problems... or not....
tengo una macbook 7.1 y quiero comprar un cable de mini dvi a video compuesto.... en la pagina de apple señala que esta diseñado para imac (intel) y powerbook de 12" que ya ni existen creo.... lo unico que quiero saber es si funcionaria o no el adaptador con mi macbook...

The first review posting on the product page is:
+dosen't work on mac pro with nvidia!!!!!+
+Written by PH from hamburg+
+August 27, 2007+
Which suggests no. I have heard from an Apple Store "genius" that it does.
Both are n=1, so I'd suggest a call to the Apple Store sales line (even if you don't order it that way).

Hi All,I have one serious problem regarding sap b1.

Hi All,
I have one serious problem regarding sap b1.
In Sales order whenever I select the item from list or tax from list one. I got this
Msg Box (Application has a problem. Diagnostic file c|:\Program file\SAP\sap Business one \Log\Sap Business one_20080602105441.dmp was created.
Please contact support and attach diagnostic file). When select ok sap b1 application close. If anyone required screen short of all this error plz give me Ur email id I will send u.
Can any one help me?
Awaiting Early Response
Regards
Rajkumar Gupta

Hi Rajkumar,
create a message at the marketplace and send them the diagnostic file with an error description.
lg David

My iPad Air have a screen problem so I sent it to iService (I'm Thai) but they told me that they don't know how long that I have to wait until I will get a new one? Can anyone help me?

My iPad Air have a screen problem so I sent it to iService (I'm Thai)
but they told me that they don't know how long that I have to wait until I will get a new one?
Because they said there's no stock in Singapore
Can anyone help me?
Just bought on 15/11/2013

You can call iService and ask to speak with a manager.

My mobile form of my homepage have some size problems!

Hello! My mobile form of my homepage have some size problems. All pages gets right size exept one. It only cover halv of the page. What is wrong?

Hello,
Can you please share the URl of the page with us so that we can get a better idea of the issue.
Usually this happens when any object is placed outside the browser are in Phone layout.
Regards
Vivek

Hi apple *sigh* i have a serious problem with my imessage... when i try to open it, it automaticlly sends me back to my homescreen... hope someone knows this problem, thanks

Hi apple *sigh* i have a serious problem with my imessage... when i try to open it, it automaticlly sends me back to my homescreen... hope someone knows this problem, thanks

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

I just did a reset all settings on both.
Will see where this gets me.
Thank you for your helpfull input.

I have some software problems of running matlab script node in the LabVIEW program.

Hi there,
I wrote a simple matlab code, like x= 1, y = x*2. Then I tried to put them into matlab script node in LabVIEW.
However, when I ran the program, I couldn't run and Labiew show some error.
Then I tried the method talked before on this forum. Please see the following link.
http://forums.ni.com/ni/board/message?board.id=MathScript&thread.id=571
I followed the instruction and open the "command prompt," type some commands then I could run the program, and simultaneously, the LabVIEW program open "Matlab command line window" and run my labview code. However, if I didn't use the command prompt, the "matlab command window" will not be opened by running the labview program. It would just show some error. And even if I turn on the matlab program in advance, I still couldn't run the labview program.
Is there any effecient way to deal with this problem without using "command prompt?" Because I try another PC with both matlab and labview installed on it, I "can" run my simple matlab script node on it, and it will open the matlab command line window automatically by running my code. Therefore, I thought there might be some software linking problems in the previous PC I used . Do you have any ideas?
Thanks in advacne.

This board is for Mathscript, but you seem to have a matlab problem. You should probably post in the LabVIEW forum instead.
What is your LabVIEW version? What is you matlab version?
LabVIEW Champion . Do more with less code and in less time .

TS1398 Turn the wifi on and off? I think I have a serious problem here. I cannot even press the on and off because its not available (the color is grey not black). I think this is why Apple is constantly losing a buyer and user. Slow action.

What is the problem here Apple? Please hear us. I turned on my Wifi and then turned it off after use. After that I noticed something strange because I cannot turn on the wifi button anymore. I have restarted the phone several times, and turn it on after 10 mins, sometimes 30 min - 1 Hr. but then again its not working. I encountered this problem after updating my iOS to 6.1.2! Please hear us. If you wanted to penetrate to the market please love your consumers. Your products are great but your actions to their(US, CONSUMERS) problems in terms of bugs fixes and battery life is so slow. Why is that?

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

MY IPAD 3 HAVE SOME SERIOUS PROBLEMS

Similar Messages

Maybe you are looking for