My iPad 3 microsim card slot is stuck or jammed. Manually cut micro sim is stuck inside the slot. I can't open it. How to proceed?
My iPad 3 microsim card slot is stuck or jammed. Manually cut micro sim is stuck inside the slot. I can't open it. How to proceed?
If they can't extract the SIM without opening the iPad (which no service center is authorized to do), and you can't manage to get it out yourself, then you'll probably have to pay Apple's out-of-warranty replacement price and get the iPad replaced. Use of a cut-down SIM is not covered under warranty.
Regards.
Similar Messages
-
I can not open the microsim card slot and my ipad is brand new!
When i try to opne the microsim card slot to introduce the sim card nothing happpens. Can somebody tell where and how I introduce the microsim card in my ipad?
The trick is pushing the SIM eject tool in a 45 degree angle as was also the case with the iPad 2, as opposed to the iPad 1 (and all iPhones). Pushing it in a 90 degree angle won't open the tray, unlike in the listed models.
Also see the photo and description at http://support.apple.com/kb/HT4577 , which also shows this. -
I have downloaded and attempted to purchas the app "ForeFlight HD" for the iPad 2, however, when I put my credit card information into the app for purchase, I am told to contact iTunes support to complete the transaction. Can you tell me how to fix this?
Contact iTunes Support:
http://www.apple.com/support/itunes/contact/ -
I want buy Ipad Wi-Fi 3g in Canada Apple Store.Is it have micro-sim slot for using 3g abroad?In Ukraine being exact.
Lets make it clear.
The thing is i know that in the US Ipad 2 Wi-Fi+3G Verizon goes without any slot for micro-sim. So i won`t be able to use 3g abroad.
In Canada store they don`t give no required carrier.Does it mean that Ipad 2 Wi-Fi+3G from there has a micro-sim slot and is ok for using 3g worldwide with local carrier? -
I tried to update the software on my ipad and now my screen is stuck on the plug and the itunes logo
I tried to update the software on my ipad and now my screen is stuck on the plug and the itunes logo
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks
I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.
-
I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?
how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB -
I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.
The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
Cheers, Tom -
As stated I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this? I need it for homework tonight.
Crowntheme,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still freeze after a few minutes? -
Stuck in The Apple logo I cannot open it or use it what can I do??
My iphone 5 is Stuck in The Apple logo I cannot open it or use it what can I do??
The option key is the key that has alt on it...
If the disc is still stuck try these options below:
Keyboard
Hold down F12 as you restart the computer until the CD ejects itself.
USB Mouse
Hold down the left mouse button as you restart the computer until the CD ejects itself.
Good luck. -
My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?
Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo. -
I gave my brother my old iPad. I reset it so it's like a new iPad. But, it is still in my iCloud tabs, not what he is doing, but the last thing i had open in Safari. When I went to iCloud.com and did the find my iPhone thing, it was still listed. But it couldn't find it. It's rather annoying to have it there all the time. How do I make it go away. I can't see a way to tell iCloud that that device is no longer mine.
Wipe iPhone/iPad/iPod touch clean
There are a few steps to do:
Switch off iMessage in Settings > Messages
Switch off FaceTime in Settings > FaceTime
Delete iCloud in Settings > iCloud > Delete Account
Finally Settings > General > Reset > Erase All Content and Settings.
Un-register your device: https://supportprofile.apple.com
Now you can sell/give. -
my macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls or call to a new call
Is there a case on the iphone?
If so, then remove it and see if that solves it.
Otherwise, make an appointment at the genius bar. -
I just got my iphone 5c ...went to the apps store and started a new id...its stuck on the privacy policy and i dont know how to get it off that ...please help
Hi Bam,
I am so ecstatic to hear that you are wanting to open an account in your name! We offer an Assumption of Liability that would allow you the current account holder to give permission for you assume liability of your number. Click here for information on how the process works http://vz.to/HverXe .
Thanks,
PamelaF_VZW
Tweet us @vzwsupport
Maybe you are looking for
-
Deployment problem on glassfish v2
hi, when i am trying to deploy a WAR file on glassfish v2 following errors are coming..... Timestamp Sep 11, 2008 14:30:26.006 Log Level SEVERE Logger javax.enterprise.system.tools.deployment Name-Value Pairs ThreadID=17;ThreadName=Thread-682;_Reques
-
Multiple admin sources for one administrator
I'm looking for advice please. I barely manage my way through this but have used timbuktu for several years. I have had to move the network and change hardware and now want to resetup, I would need new licenses. I'm wondering if the 10 seat ARD would
-
SP Level required for NW 7.0 Ehp1
Hi, We are on SAPKB70017, KA -17 and system --> status showing ECC 6.0, I heard that, if we apply SP stack 19 (Basis -19, abap -19, bw - 21 and PI basis patches ) system --> system will change from ECC 6.0 to SAP EHP 1 Ple clarify this Regards, Yash
-
hello every body..... I have a problem in creating a bpel process, I have made a webservice in jbuilder and want to use its wsdl in my bpel project but I have an error like this : the partnerlink is not defined and con not be found ....... I have tes
-
Hi all, whenever we are running a calculation script we are getting below error ERROR - 1200467 - Error executing formula for [Default scenario]: status code [1130203] in function [@_VAL]. After re-run its working fine.. Any thoughts on this?? Is it