My iPad 3 sleep/wake no longer triggered by smart cover

My iPad 3 no longer senses the smart cover: when I close the smart cover, it doesn't go to sleep, nor does it wake when I open the smart cover. I also have a Logitech keyboard cover which used to trigger the sleep/wake, but also no longer does, so the issue seems to be in the iPad and not the covers.

Thanks, enabling it in settings resolved the issue.. Must have disabled that setting without noticing it.

Similar Messages

  • I am about to buy an iPad 3rd gen. Do I get a Smart Cover?

    I was planning on buying a polyurethane Smart Cover at the same time as the iPad, and this would be the only protection I would have for it.
    That being said, I own an iPhone 4S, and have never used a screen protector or case for it.  It goes in my pocket basically whenever I am not using it.  I have some light scratches on the back glass that you can see only in the right light, and nothing on the screen.
    Based on that, would you say that this will be enough protection for me?  Also, for those of you who own an iPad and a Smart Cover, do you recommend the cover?  I have read on this forum from time to time that the Smart Cover can scratch the iPad where it hinges to it, and that sometimes the screen gets scratches from dirt that is being held there by the cover itself.
    I am not really paranoid, but I don't want to be on this forum in 2 or 3 weeks asking what I can do about the scratches on the screen of my iPad.

    The Smart Cover only protects the front screen. You'll get scratches on the back plus it provides no protection for a small drop.
    I added a screen protector as it was cheap insurance protection.
    For my iPad 2, I bought an Adesso case/keyboard model WKB-2000CD http://www.adesso.com/en/component/content/article/49-coming-soon/455-wkb-2000cd .html Works great & looks good. The keyboard is easier to use than Apple's on-screen keyboard. Do a Google search using the model number to get the best price. About the same price as Apple's covers & it covers the whole iPad. Although the new iPad  is slightly thicker, it should fit this case.
     Cheers, Tom

  • My ipad will not wake on incoming calls on face time

    If I let my ipad go to sleep it will not wake up on incoming calls. My calls other devices are not received.

    Try putting it into recovery mode.
    Connect iPad to your computer via USB while it's turned on.
    Open iTunes
    Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
    Power off the iPad completely (wait for the progress spinner to disappear).
    Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
    After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
    Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
    A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
    Click on the "Restore" button and the process will begin.

  • Ipad 2 dimming after smart cover is opened

    Why does my ipad's screen dim after I open the smart cover?  Then I have to touch it first so it wakes up

    I don't have the iPad2 so I can't use the Smart Cover (don't think I would choose to use it anyway from what I have read about it) but I thought this was interesting ....
    What happens if you remove the Smart Cover completely - i.e. don't use it at all - and power the iPad up using the Power switch. Do you get the same problem then? The iPad has an ambient light sensor too that measures how bright it is where the iPad is being used - it turns up the screen brightness when it's bright to make the screen easier to read and turns down the brightness when it's dark, so that it doesn't blind you. Sometimes the light sensor can be inadvertently covered which can cause it to appear to malfunction.
    I copied that text from this forum.
    http://www.ipadforums.net/ipad-2-forum/21991-smart-cover-ipad2-question.html

  • Smart cover lock option not show in setting in new ipad

    hi
    i have a new ipad 64 wi-fi 4g and i used smart cover.
    when i conected smart cover to new ipad, in setting>general not show smart lock.
    plese help me

    Mine did not show up until I ran a kitchen magnet along the edge of the iPad. I heard a click and then when I went to Settings, the option was there. I had a cover that was SUPPOSED to work with the new iPad, but the magnet was in the wrong spot, apparently. I discovered the locationproblem by using the magnet trick............and in the process, managed to activate the smart cover option

  • Is the ipad smart cover Manufactured in Jan 2012 compatible with iPad 3?, Is the ipad smart cover Manufactured in Jan 2012 compatible with iPad 3?

    I bought s Smart cover polyurthane manufactured in Jan 2012. Is it compatible with my ipad 3?

    But there are some rumours saying the iPad 3 wont Auto-switch on when the smart cover is taken off from the screen.

  • Ipad 3 cases compatible with smart cover.

    Hi, im looking for a ipad 3 case that willl work with the smart cover but there is not alot online and wanted to know if anyone had and ideas. thanks

    It will be listed here:
    https://www.speckproducts.com/tablet-ipad-cases/the-new-ipad.html
    Also, there is a quick review of the iPad 2 version here:
    http://www.youtube.com/watch?v=kQw9hLcKyqE
    When I called speck, they said not to get the iPad 2 version and try to 'make it work' and to just wait for the new version.

  • Best Ipad air case that are Smart Cover compatible

    I'm looking for a clear ipad air case that covers the back of my ipad but still let's me use the Smart Cover and I don't want to pay a lot for it

    I have used box wave's product in the past and they're great
    http://www.amazon.com/BoxWave-Arctic-Frost-Apple-Crystal/dp/B00G6YM08Y/ref=sr_1_ 2?ie=UTF8&qid=1383944440&sr=8-2&keywords=ipad+air+tpu

  • Apple iPad 2 Smart Cover For iPad 1

    Helo folks
    Since no difference between first and sec gen. Of pad's screen , length and width sizes, i want to get a ipad 2 smart cover for my original ipad 1 , possible ? .. It should
    ?

    The display size and resolution are the same, the iPads themselves are not exactly the same dimension. Also, the new iPad has magnets inside of it help the smart cover attach itself to the new model.
    You would be wasting your money, the Smart Cover is for the iPad 2 only.
    Dah•veed

  • HT1430 My ipad mini is frozen in an app and the home button is stuck.  Pressing down on the sleep/wake button does not give me the red slider to turn the ipad off.  Is there any other way I can reset?

    My ipad mini is frozen in an app and the home button is stuck.  Pressing the wake/sleep button does not bring up the red slider to turn the ipad off. Is there any other way I can reset the ipad?  Can I remove the battery? and then put it back in?

    barbarafromnl wrote:
      Can I remove the battery?
    No the battery is non removable.
    Try a Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • HT1414 my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the  home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is d

    my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the  home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is dead

    If it is one year old minus one day it is still under warranty. If it is more than a year since you purchased it then yes, the warranty has expired.
    Millions of iPads have been sold. Most continue to function long after their warranty has expired. Check the many requests about updating the iOS on the original iPad on these forums and you'll see that there are many iPads still working after three years. My iPad 2, which I had for over two years is still working well for my son in law who took it over from me when I bought a new one.
    Given that there will always be a few iPads that fail early. Most of those will be covered under warranty. But some will fail after the warranty has expired and before the owner expected it to. I'm sorry to hear that you are in this category. Take your iPad to an Apple store and have it looked at. They will provide you with alternatives, one of which is to purchase a like model to the one that failed at a discount. You can then know your options and make the best choice for you.

  • My iPad Sleep/Wake button not working after upgrading to IOS 4.2.1

    Since I uploading the OS system onto my iPad 3G, the Sleep/Wake button is inoperate. When I click this button, my iPad will not turn on (I press the Home button to activate my iPad). When my iPad is on and I press the Sleep/Wake button nothing happens.
    I restored my iPad on iTunes which did not solve the issue. I have search this forum for any solutions and I have reviewed the iPad User to see if I miss something when I activated the update OS on my iPad.
    Any other iPad users experiencing this issu? All recommendations is greatly appreciated.

    Sorry, but I can't tell from your writeup how it is that you're actually using those controls. Some basic points:
    A. Merely pressing the Sleep/Wake (SW) button doesn't turn the machine on if it's off. Instead, you press & hold it until the white Apple logo appears.
    B. If you press Home and the machine comes to life, then it was not off, powered down. It was sleeping, or idle.
    C. When on, pressing/clicking SW should put the iPad to sleep.
    If you can't put it to sleep by pressing SW, and can't shut it down by pressing & holding SW until the red slider appears, then you have some sort of a fault involving that switch itself and you're probably looking at a hardware replacement. Follow instructions in your User's Guide to start that process.

  • HT201263 my ipad 2 wont turn on. I have it plugged into charger and when I hold the sleep/wake button, the battery image appears for 1 second, then the screen is blank. How do I get it working again?

    My ipad 2 is wont turn on. I held the sleep/wake button down for 15 seconds and the battery image shows up for a second then the screen goes blank. Help!

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • TS4036 my ipad wifi cellular 16 GB 4G switched off inbetween and is not switching on at all. I have tried to restart by using sleep/wake button, but red slider does not appear. I have recharged battery, still no response. what should i do?

    My iPad Wi-Fi cellular 16 GB 4G switched off suddenly, even when the battery was 40% available. It is not switching on again, i have tried restarting by using sleep/wake button, but red slider does not appear. I kept it off like it was overnight, in the morning agin recharged it, but still it is not switching on. it is not responding, except when i connect the charger, it gives a blink noise that recharge has started. I removed the SIM and tried restart it but no response, What should i do to restart it please?

    Seems to be working again, I haven't done anything though. And the "wifi" led on my laptop is off, which should mean that the interface is down.
    This is driving me crazy I don't understand how the all thing works, if anyone has any tips that would be very nice.
    Thanks!

  • HT1430 Where are the sleep/wake and home buttons found on an iPad?

    FRozen from icloud backup . Help

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • How to attach files using an applet

    hi, i want to know how can i use an applet to upload or attach files in my application help me

  • Bluetooth and Plantronics Legacy random disconnect issues

    I've been using the latest MAXX with the latest Plantronics Legacy headset.  Randomly, bluetooth will disconnect, the call will remain active but does not automatically failover to either handset or speaker option (literally the call is active and I'

  • Mail and Preview get stuck using way too much CPU

    Has anyone else had an issue with either Mail or Preview getting stuck using over 100% CPU for no apparant reason. This has only happened since downloading 10.8. With Mail, I can't figure out what sets it off. It happens occasionally when I'm replyin

  • How to carryforward Balance Sheet CI items marked as 30/3 having credit balance

    Hi Expert, We have a issue where Balance Sheet (security Deposit) GL  marked as 30/3 in Commitment master data. And this GL/CI is having credit balance. Now the business requires this balance to be carrforwarded to next year. Is it possible ? Regards

  • How to install DRM in 11.1.1.3

    Hi all, can any one help me how to install DRM in 11.1.1.3 (please write the procedure) and how to post-configure or configure. best regards. Edited by: 869377 on Jun 30, 2011 1:04 AM