My IPad 3 wi-fi connection breaks down regularly!

My wi-fi connection will break down soon after I connect. When I go to settings, the wi-fi setting reads "Not Connected". I tap the wi-fi and connection is restored, but will break down maby a few minutes, maby 15 minutes later. It might last a a couple of hours to be fair.
Can anybody tell me if the problem is with my IPad or the router? ( my laptop and stand alone P.C do not have this problem)

Hi, after upgrading to IOS6 I have been having the same problem with my Ipad 2 and Netgear MBRN3000.
Previously everything was working fine.
Now, none of the solutions above seem to work at home and obviously I don't have control of wifi configurations around the world. In any case my personal router's settings are fine and I am not willing to change them.
I have also tried resetting the device a number of times.
So finally this is not my problem or routers problem this problem is due to apple (notice the lower case a) and it's faulty, buggy, ****** IOS6 release.
PLEASE SOLVE THE PROBLEM ASAP AND POST AN UPDATE!!!!

Similar Messages

  • XI JDBC connection breaks down

    Hi,
    i have a question to one issue i have at the moment. I configured a RFC -> XI -> JDBC scenario which works fine if i only try to select a small amount of data. As soon as i try to select more data the calling system creates a shortdump which says "connection to partner broken" / "CPI-C error CM_PRODUCT_SPECIFIC_ERROR". First i hade a problem that the parameters for the connection timeout where set wrongly (this has been solved) but now the mentioned error comes up. Dose anyone know this kind of problem?
    Thanks in advance,
    Andreas

    Andreas,
    Can u have a look at SAP Note- 47682 , I think it might help you.
    -raj.

  • Phone connection is breaking down after a second of ringing

    When trying to make a phonecall, the phone dials correctly and connects to the recipient. you hear it ringing with a free tone and after one second
    the connection breaks down, you hear a busy signal.
    The same happens when anyone tries to call me. You see the incoming call, after one second the connection breakes down and the display
    shows "missed call"
    Is this problem known ?

    I can´t imagine, that it is a carrier problem. All other functions as sms, internet and so on are working fine and without any problem

  • Rfc(Syn)- BPM- JDBC connection breaks for job in 2Hrs

    Hi All,
    I have a scenario Rfc(Syn)->BPM->JDBC.
    Problem i am facing is after 2Hr of execution of scenario. SAP & XI connectivity breaks down.
    But to process full data it requires 5-6Hr connectivity because store procedures taking time(for 500 records).
    Is there any solution for above problem?
    Can we use ABAp Proxy instead of Rfc(i.e. ABAP Proxy->BPM->JDBC), If possible How?
    Thanks & Regards

    hi,
    >>>>I have a scenario Rfc(Syn)->BPM->JDBC.
    sync??? you can/should only use sync
    if the response time is around 30 seconds
    so change the interface to async
    >>>>Can we use ABAp Proxy instead of Rfc(i.e. ABAP Proxy->BPM->JDBC), If possible How?
    yes but you still have to do it in an async way
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • WiFi breaks down when using wireless headset

    Hi,
    every time when I connect my wireless headset my WiFi connection breaks down. When I test it with my daughters iMac and it works fine. There are 2 main differences between both iMac. I am using wireless keyboard and mouse, she doesent. She still uses OS X 10.5.8.
    Any thoughts on this?
    best regards
    Zoor

    Sounds like there may be a channel conflict, try changing channels on the router. You will need to learn the router's utilities to do this unless you use an Apple Airport Extreme or Airport Express. Then all you need to do is run Airport Utility and change the channel, which is very simple.

  • My apple tv(3rd Gen) total screws. connection always break down, nothing changes on the setting!!! no movies, no iTunes, only seconds than it is gone!!

    One month after purchase and perfect functioning my apple Tv is screwed! I can not stream any content to since the connection always breaks down after second, also itunes etc cannot be accessed!!
    I did everything, changed Routher channels to all possible options(13 different and although everything worked before), resetted at the PC ( Was not possible to wifi, connection broke doWn), also resetted the Router. I switched of HD and all kinds off things, no sign of change!
    I found out that actually some apple TV's have a problem with the wifi chip, might be one of those?
    Contacted Apple, they are exchanging it against a used and repaired one?!?! Hello?! It is one month old!!!! No scratches!! And I still had to wait before they checked mine!!!
    I want a new one!! Support is an hilarious excuse for a company that sells this kind of quality image!!! I am hugely disappointed!!
    Did anyone else have this kind of problems?

    So you are having a network connection issue.  Have you run the network diagnositics to test the connection?  Have you trying using a wired connection to isolate if it is a WiFi issue?
    I can not stream any content to since the connection always breaks down after second
    How are you streaming?  AirPlay?  ATV menu?
    I can not stream any content to since the connection always breaks down after second, itunes etc cannot be accessed!!
    Is homesharing enabled?
    I did everything,
    Clearly you have not done everything since the problem has not been found.  Lets try to stick to reality here.
    I found out that actually some apple TV's have a problem with the wifi chip, might be one of those?
    It is not likely if you just bought it new.  You can google for the model numbers that were specificly recalled though if you want to check.
    Did anyone else have this kind of problems?
    A lot of the issues posted are network related.  Most come down to WiFi issues.  Streaming video rarely works well over WiFi unless you have extremely high end WiFi hardware to support it.  Any streaming video product will work better connected via eithernet.

  • PC breaks down when connecting with iPhone

    For about 2 weeks my PC breaks down whenever I try to connect with iPhone. A blue screen appears and it shuts down immediately. After restart the same happens again. Can anyone help me?

    Hi Diana,
    Does your PC have software for a Logitech QuickCam/Webcam, Lexmark scanners, or a built-in media card reader?
    If it does try uninstalling the software from Control Panel, then testing and downloading the latest software/drivers available, as described here: http://support.apple.com/kb/TS1502
    -Jason

  • U430 touch - Bluetooth Connection regularly breaks down

    All,
    I have a U430 touch with Windows 8.1 64bit and work with a Microsoft Sculpt Comfort Mouse with Bluetooth connection.
    The Bluetooth connection regularly breaks down and the Mouse stops working. The internal Pad is working properly.
    In this situation I go to "PC Configuration" / "PC and Periherie" and click to "Bluetooth" (with the internal pad, because the mouse is not working ;-) )
    The Bluetooth connection "heals" immediately and the Mouse starts working.
    Unfortunately I have this behaviour every 5-10 Minutes and I do not see a clear pattern when it happened.
    Does anyone have an idea, a solution for this? It is really annoying.
    Please find enclosed the driver and Programs I have installed.
    Thanks to all
    Joerg
    Information shown in the Bluetooth-Configuration-Window
    Intel(R) PROSet/Wireless Software for Bluetooth(R) + High Speed, Version 3.1.1307.360, 26.06.2013
    Microsoft Sculpt Comfort Mouse, Version 6.3.9600.16421, 21.06.2006
    Information shown in the Lenovo Solution Center
    Mouse Driver: Microsoft 9.4.156.0 12-04-2013
    Intel(R) PROSet/Wireless Software for Bluetooth(R) + High Speed, Version 16.5.0.0096
    Intel(R) PROSet/Wireless Software for Bluetooth(R) Technology(patch version 3.0.1335.5), Version 3.1.1307.0362

    Try the latest Intel drivers, they are supposed to fix some of the wifi/BT issues with the intel 7260ac boards.
    Intel PROSet/Wireless WiFi Software (includes Drivers):  Wireless_16.7.0_e164.exe
    Intel® PROSet/Wireless Software for Bluetooth® technology: BT_3.1.1311_e164.exe

  • After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

    After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

    My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

    Posted this before I realised there is an update for the iPhoto app 9.1.3 which sorts the problem.

  • I found my ipad screem break down without fall downwhat can i do? it is in garanty.

    I found my ipad screem break down without fall down what can i do? it is in garanty.

    Take it to an Apple Store or Authorized Apple Service provider.  Let them look at it and advise you what to do next.

  • 2 iPads, but can only connect one iPad at a time to my home network.  Is this a known issue with Mac/iPads in general?

    At home I have a HP PC, netbook and Sony laptop with no connection issues.  Last year I bought an iPad 1 for my wife.  This year I bought an iPad 2 for myself.  However, only one iPad can connect to the wifi home network at a time. If I am using the iPad2 then the iPad1 fails to connect to the internet.  if the iPad1 is being used then the iPad2 cannot connect.   I tried resetting iPad network settings for both, reset router, and updated both iPads to latest software/firmware yesterday.  Right now the only iPad that shows any connection is the iPad1.  The iPad2 does not see the home network or any other outside network.  Any suggestions or ideas on how to resolve this?  It is odd the network issues only affect the iPad's.

    @dananova,
    It sounds like you need to either increase the number of dynamic IP addresses your router will hand out or change some of your devices to static IP addresses. 
    Check the router manual on how to change the dynamic IP range of your router.  If you don't have a manual, you can go to Belkin's website and download it.
    To change the IP address of your iPads to static addresses, go to Settings > Wi-Fi and tap the ">" next to the name of your wireless network.  DHCP should be highlighted.  Write down the all the settings on the screen. Next tap the Static button.  Enter the exact same information that you copied from the DHCP screen with the exception of the last 3 digits of the IP address.  Enter a new 3 digit number in this spot.  Generally the original IP address will end with a low number such as 009, so pick a number that is not that low but less than 255.  I would suggest a range of 240 to 250, unless the original IP range falls near this range.  Also make sure you use a different 3 digits for each device you set to use a static IP address.

  • New iPad Air will not connect to wifi?

    New iPad Air will not connect to home wifi, but will connect to others outside my home?

    Try this:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings
    3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

  • My ipad mini says to connect to itunes, and I try to restore it, but after its done extracting a message comes up saying that device is not found, is there anyway i can fix this? I don't care if i don't get my stuff back

    My iPad mini says to connect to iTunes, and I try to restore it, but after its done extracting a message comes up saying that device is not found, is there anyway i can fix this? I don't care if i don't get my stuff back, i just want my iPad restored to its starting settings.

    If everything else that you try fails, I would try using another computer. Since you don't care about saving any data, any computer that is running the latest version of iTunes might be able to restore the iPad. You could make an appointment at an Apple Store Genius Bar and they can do it for you.
    If that isn't feasible for you, try using a different cable, a different USB port. reboot the computer, and reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Then try again.

  • HT5654 after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails.  when plugged in to sync with itunes, it remains 'stuck' at syncing  step 2 of 7 backing up.  has anyone had similar problems? any solutions

    after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails.  when plugged in to sync with itunes, it remains 'stuck' at syncing  step 2 of 7 backing up.  has anyone had similar problems? any solutions?

    I had this problem.  I held down the power switch to power down completely.  Takes a few seconds.  Then use the power switch to turn on.  Might take a couple goes.
    Kirk

Maybe you are looking for

  • Calling SQL Loader from SQL Plus

    Hi everyone, I currently use both SQL Loader and SQL Plus to load data and to then carry out certain DML tasks and to reinstate indexes. That all works fine but of course I need to be present to start and to monitor the various scripts. What I would

  • RG1 report-Ztable_entries insertion

    Hi Folks, Inorder to create a RG1 report the previous development team has created a ztable of the same strcuture as J_2IRG1BAL.But I was not able to find out how they are inserting the entires into this ztable. 1.Is there any  possibility that they

  • MacBook Pro freezing issue.

    My MacBook Pro was acting fine, then, out of nowhere, it froze. I figured nothing was wrong, so I restarted the computer (which took longer than normal), then proceeded to log in. Once logged in, the desktop had trouble loading, then the screen froze

  • HT2589 how about if it says that I need to contact iPhone support to complete my transaction?

    Really, I'm having a hard time making a valid apple ID seems like apple doesn't want me to put applications and music on my ipHone :'( I've been registering since last Friday and all it says is I need to contact the iphone support!

  • Trouble viewing online video with Pismo

    I am having trouble viewing video online. But not all video. For instance, I can view clips on YouTube without a problem, but clips that play on CNN.com or NBC.com (i.e.) stutter and do not flow smoothly. Does anyone else have this problem? Is there