My iPad 3is not working screen rotation

I am already switch of to screen lock

You don't need to post the same question twice.
... And are you sure that the screen isn't locked?
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

  • I was doing an update on my ipad2 and I received an error and now my ipad is not working at all.  On the screen it just has the apple logo and a loading bar, but nothing is happening.  What can I do?

    I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message.  Now my ipad is not working at all.  The only thing that appears on the screen is the apple logo and a loading bar.  I tried to turn it off, but it just wont do anything. Help!

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My Ipad Screen got struck and Ipad is not working .On using updated IOS 7

    My Ipad Screen got struck and Ipad is not working and not allowing to shutdown also.
    Only SIRI is working. and that also not able to open any app. Today Morning I updated IOS 7. It was working fine for a while. WHen I tried to Minimize one of the app using fingers by multi touch  it got struct. Now neither app closed completely not screen is moving. Just got struck.
    Please check regarding this issue and provide me solution

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

    when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?  My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not.  Any suggestions?

    Hello Nina Izurin,
    While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Sound on iPad is not working and I've tried all

    sound on iPad is not working and I've tried all.. Someone HELP me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • Ipad photobooth not working, shows curtain closing but camera seems to be off

    ipad photobooth not working, shows curtain closing but camera seems to be off

    Have you tried closing the Camera app completely ? From the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • IPad sound not working

    iPad sound not working. Need help

    Is it working on any apps e.g. Music and Videos apps but not third-party apps or notification sounds ? If you do get sound in Music and Videos then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • I have a Ipad safari not working.

    I have a Ipad safari not working, was workingthis am.  It goes to web sites but partial greyed out and can not navigate.  Other internet connections appear to be working correctly.

    Try clearing Safari's cache : Settings > Safari > Clear Cache and also Clear History
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • TS1702 The appstore in my iPad is not working properly. It's not downloading either updates or new purchases of apps, stucks at "waiting" status an do not load them.

    The appstore in my iPad is not working properly. It's not downloading either updates or new purchases of apps, stucks at "waiting" status an do not load them. I had to go through iTunes in my computer and sync.

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Customized strings in iPad viewer not working?

    Hello,
    per request of client i've tried to change one string in viewer for iPad. So i've created template in DSP App Builder, modified this template on my computer, choose this file in App Builder and prepared another build (V28). Unfortunately, i still see old original string (i've double tested that i'm downloading new version of app). When i now check DPS App Builder, it just says "Asset stored on server", so i asume, that everything goes smoothly on this side.
    Any similar experience with customized strings?
    Thanks
    Martin

    Everything was done from scratch with V28.
    1. 10. 2013 v 16:14, Bob Bringhurst <[email protected]>:
    Re: Customized strings in iPad viewer not working?
    created by Bob Bringhurst in Digital Publishing Suite - View the full discussion
    That's odd. It worked for me when I tested it. Perhaps you should try moving the current xml file to a different folder, downloading a new version, copying and pasting, and rebuilding.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5728130#5728130
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5728130#5728130
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5728130#5728130. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • The front camera of my iPad 2 not work .   with the guarantee I can change my product.

    The camera of my iPad 2 not work
    But I have one year   with the guarantee I can change my product
    I want change my iPad 2   For  the new iPad 2.   can make that change with my warranty ?
    If if my product has problem  I have only 2 months with my iPad 2
    <Email Edited by Host>

    Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If neither fix it then you could try contacting Apple.

  • Tried to in stall the latest update.. now my ipad will not work at all!

    Tried to install the latest update.. now my ipad will not work..

    samanthafaith wrote:
    I have the ipad 4th generation. I tried installing the latest version and the screen came up with the arrow and itunes sign. Im pretty sure I have the latest version of itunes. After I tried restoring it on my coumpter it now has an apple logo staying on the screen.
    That would be the indication of Recovery Mode. You can try instructions from this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    If you attempt it a couple of times and it does not complete, then make an appointment at the Genius Bar of the nearest Apple Store, or Apple Service Provider to check for hardware problems.

  • My ipad will not workit trying to back up from icloud and wil not let into settings

    help my ipad will not work keeps trying to up date icloud and will not let me log in

    I think I understand what you mean so try this and see if it lets you get back into your settings.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for

  • How can I retain the re-writted mail from thunder bird

    Recently our mail server changed to Office 365 from Mithy server. Unfortunately when our It team changing the setting, my inbox got re-writted and I lost all old mails. Kindly let me know, if there is any possibilities to retain those deleted mails..

  • Wipe Media Card Clean

    To wipe the media card clean: Options, Memory, and when memory screen comes up hit blackberry menu key.  There is an option to Format the media card.  That will wipe music, pictures, etc. stored there clean. Now, back in the box...  see ya' all later

  • How do I  join text to shapes in pages?

    how do I join text to shapes in Pages?

  • Services for Object in VF02 & VF03

    Hi All, Attaching a document through "Attachment list" option by the "Services for Object" icon in VF02. however some options are grayed out. Please read through for the explanation of the problem. 1) Go to transaction VF02. 2) Input a billing docume

  • Application document not psted status 51 in ALE/IDOC

    Hi Gurus/Experts; Status number : 51 Application document not psted. I have configured ALE for distributing material master data. On the outbound side the status of every Idoc is sucess. But on the inbound side some of them are red stating error. Out