My Ipad 3rd gen kept shutting off and we would have to restart and log back on to internet with password. So backed up to icloud and did a restore. It could not complete the restore. No luck at Genius bar. Can trade for a new one for 299. any ideas to fix

Ipad 3rd gen kept shutting off. Had to restart and log back on to internet with password. backed up and did restore.
could not complete. Took to Genius bar and they could not either. Said we trade with $299 for another one.is there
someplace to get these things repaired. It was 4 months out of warranty.

Yet another quick follow up to something I have stumbled upon with this issue. If I connect to my Airport Extreme on the 5Ghz channel, Dictation continues to have issues. However, when I switched to the 2.4Ghz channel dictation has been working great now for a while.
The dictation option is still missing under General>Settings>Keyboard however.
Not sure at all what one would have to do with the other? but hey, if it's working then I'm going with it for now. :-)

Similar Messages

Illustrator cs6 Can't open the illustration. Could not complete the requested operation.

Hi guys
I'm struggling with my Illustrator CS6. I hope you will help me.
When I try to open my project it says "Can't open the illustration. Could not complete the requested operation." After clicking ok my project is loaded WITHOUT one layer. I sacrificed a lot of time doing it and i don't want to start it over again. None of the ways to open it as older version of program work. I know that it can be recovered, because when I open the same project in After Effects all layers are loaded properly. If somebody know how to solve this problem please let me know asap.

Thanks, Monica, Ryan, and Mike. It helps to know that this is the best I'm likely to get, so I don't waste more time looking for a better solution.
I was able to place the file, then simply redraw or retype the broken parts on top of the placed art. Often, I could click into the placed art and copy contents from it. For type, though, I had to retype whatever got broken.
Since I posted my 1st comment here on Dec. 5, it happened to me again. Again, I had to reconstruct parts of it, the same way.
Sometimes, I save a file without PDF compatibility enabled, just to make it save more quickly. I'm glad I didn't do that with this file.

Hello good evening. my iphone 3g I try to restore with itunes and not completed the restoration gets stuck and disconnected and brand UNKNOWN ERROR -1. can help me please.

hello good evening. my iphone 3g I try to restore with itunes and not completed the restoration gets stuck and disconnected and brand UNKNOWN ERROR -1. can help me please.

Try a different cable...
yescadnk wrote:
... UNKNOWN ERROR -1. can help me please.
Error -1
Attempt to restore your iOS device two more times.
If the issue is still unresolved, the device may need service.
From Here > http://support.apple.com/kb/TS3694

HT201210 I tried to update my Iphone 4S & was sent an error message telling me to restore my phone & did so & now my phone is unable to be used because it will not complete the restoring process & is locked in this screen not letting me use it at all.

I was trying to update my software to on my phone and it would not let me do so sending me a message to restore my phone before I can complete an update so I did this but it would not complete the restore and was sent another message stating that my phone is already in recovery mode and a restore needs to be completed before I can update any software. I have tried this four times now and my phone screen is stuck with the Itunes symbol on it along with a picture of the plug. It will not let me eject or do absolutely anything. I cannot use my phone at all. I have even tried to shut it down and turn it back on which still did not help.

and error code or the exact msg would help

"Windows could not complete the installation" after restoring Lenovo T61 to factory settings, help!

Hi everyone;
I recently tried to restore T61 laptop to factory settings and I received the message "Windows could not complete the installation. To install windows on this computer, restart the installation". I used Dr. Google to see if I could fix the problem; but unfortunately after re-starting multiple times, restoring to factory settings (after changes to the Administrator account as well as "Oobe" settings, in any number of combinations); I still get the same error message. Any thoughts? I'm attempting to reinstall Windows Vista Business. I do apologize I'm not a computer person so if you need any additional details please let me know; thanks in advance!

Hi,
It may be a good idea to run a couple of hardware tests.
Shut down the notebook.
Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Diagnostic Menu option ( f2 ) and run the tests on the Hard Drive and Memory.
If you get any error messages/codes, post back with the details.
If the tests pass, you can order a replacement set of Recovery Discs starting on the link below - the cost does vary a little depending on where you live, but they're generally inexpensive.
Order HP Recovery Media.
If you have any problem with this link, see if you can order this directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBoo

My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBook Pro (4).sparsebundle'' could not be accessed (error-1).
Problem started after deleting parrell desktop and window7 ?
Please help?

Look at the more like this column on the right.. this is the most frequently asked question in this discussion area.
Reboot the TC.. restart the whole network if the simple reboot did not work.. start in order. modem.. router/TC.. clients. 2min gap.
Read C12 here. http://pondini.org/TM/Troubleshooting.html

Illustrator CS6 and CC can't finish previewing. could not complete the requested operation

This is happening in both Illustrator CC and CS6 on 2 x imacs, one macbook pro and one macbook air.
Can anyone help with this issue.....it's doing my head in. When it does this it reverts to outline view and when going to preview mode it comes up with the error.

We use Illustrator for package design. The files are quite complicated.
Recently we are experiencing extreme lag on Ai files. In some cases we get wierd stair stepping and duplicate pixel studdering across the monitor as we mouse over the art in preview mode. Sometimes get a "Can't finish previewing. Could not complete the requested operation." message.
How much RAM/Resources do we need to run this bloated software?
Trimmed most installed user/library fonts. Universal Type Server only opens required fonts.
Current system(s) is OS 10.8.4
27 inch iMac 3.4 GHz Core i7
32GB Ram 1600 MHZ DDR3
thx
paul

HT3275 I recently bought a new Time Capsule and the following message is shown:- "Time Machine could not complete the back up. The backup disk image "/Volumes/Data-1/Brian's iMac.sparsebundle" is already in use." Can anyone help?

I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?

Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular

HT201250 my back up keeps giving me a message that "time machine could not complete the backup folder. It just keeps popping up and I have to cancel it to continue using my computer. Any thoughts on my problem would be appreciated.

My computer keeps getting a message that "Time Machine could not complete the backup. It continues, "Unable to complete backup. An error occurred creating the backup folder. I have to clear the pop up from my screen to continue using the computer. It is getting very tiresome. Any thoughts?

Hi there dean93,
You may find the troubleshooting steps in the article below helpful.
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/ht3275
-Griff W.

"Windows could not complete the installation"

I took delivery of a new T400 today. Imagine my surprise upon turning it on to see the Windows F8 recovery menu, and a message about the system not having been shut down cleanly. Strange thing on a machine straight from the facory !
Well anyway I let it boot into the normal mode. Next the OS booted and something obviously ran to install updates. I suspect that one of these failed. Eventually I was presented with a dialog that says "Windows could not complete the installation" and "To install Windows on this computer, restart the installation". Sadly this same dialog displays regardless of how many times I reboot.
Reading the scanty doc that came with the machine, it appears to have a recovery partition and a way to invoke a factory restore from the partition. Unfortunately entering recovery mode does not work (I press F11 and it goes ahead and boots into Vista anyway).
Next I tried calling Lenovo. They politely said that they are not working at this hour and I should call back in the morning. Well I am planning to take this new laptop on a business trip in the morning and won't have time to call before I have to be at the airport.
So back to self-diagnosis...I found that when in the 'All your install are belong to us' mode, I could press ctl-alt-del and get task manager up. From there I could run commands such as cmd.exe and msconfig. Using msconfig I opened the event viewer. Nothing too interesting in there, except that a service or driver called tuvu...somethign didn't start.
Another thing I found is that there is no way any longer to get to the F8 safe mode menu on boot. It just blips on the screen for a nanosecond and then it's gone (even if you have pressed F8). So I used msconfig to boot into safe mode. That didn't help.
I've always bought cheapo off-brand laptops from Costco, and this was my first 'premium brand' purchase. To say the least I am not impressed. Surely Lenovo can spare 10 minutes to ensure that each machine actually boots before they ship ??
Any pointers on how to fix this machine are most welcome.
UPDATE : I made some progress on my own. On a whim I decided to go looking for the process that had so rudely decided that I couldn't use my computer. Browsing the process list in taskman, I noticed something called 'runonce.exe'. So I did the obvious thing and killed it. Bingo ! I now have the vista desktop and the machine appears to be working just fine. It's now updating. Presumably I can find and disable this thing that used the runonce wrapper and I'll be good to go,.
Message Edited by dboreham on 09-08-2008 09:58 PM

I had this same problem on my T61 and after seeing yoru post I imaged my system successfully to get rid of the problem on my system. You can image it without making burning any discs. What I did was hit the Thinkvantage button during boot, chose the Restor System option, chose full factory reset, chose to delete all my files and then chose the custom option for recovery. I don't remember exactly which items I unchecked, but there were a few towards the end that had OOBE in the name. I let it complete the restore and it seems to be working fine now. So you might want to try doing it that way, I was hoping that one of the things I unchecked was whatever was causing the system to crash near the end of install and mess up the Vista installation.
Good luck! Hopefully this will work for you instead of just wasting like 3 hours...

"Windows Could Not Complete the Installation" G410

Hi,
Would greatly appreciate any advice for this.
My laptop (G410) first started having temporary freezing issues when I loaded up Powerpoint. Next thing i know, the laptop dies and whenever I turned it on, it kept getting stuck in the Lenovo loading screen.
After a while, I managed to activate the refresh but now I am stuck with the following message: "Windows could not complete the installation". This happens when the setting up a few more things screen reaches 3%.
Any solutions to this? The laptop is only a few months old.
Thanks!

hi cny1491,
Welcome to the Lenovo Forums.
Can you try to turn off the computer and press the OneKey Recovery Button. When done, the machine will turn on and will give you a menu. On the list of options, select System Recovery to restore the system to its factory state (note that all data will be wiped on the OS partition).
If the machine freezes during the recovery process then I recommend you contact lenovo and report the issue as there's definitely a malfunctioning component inside (possibly the HDD).
Support Phone List
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Activation Error: Could not complete the iTunes... (help!)

Activation Error: "Could not complete the iTunes Store request. The store may be busy. Check your Internet connection or try again later"
Ok that is the error I get every time I set my new iPhone in the dock.
Details:
I bought the 8GB iPhone at the Kenwood Mall in Cincinnati OH, brought it home installed version 7.3 of iTunes, plugged in the dock and the iPhone, I went through the activation process and after agreeing to all the terms and licenses, the iPhone said "activated," but iTunes was still trying to connect to AT&T for something and eventually timed out. I remove the iPhone and it seems to sync and all features seem to work fine including making and receiving calls. BUT... everytime I place the iPhone in the dock, I get the above error. I click OK and every works fine. This happens everytime I place the iPhone in dock. How do I get rid of it??? Is there still something else that needs to be done on my account. BTW, my Internet is working fine, as I am typing this message via my Internet connection in IE on apple's site.
Thanks
Dell XPS Gen-2 Windows XP Pro 1GB Mem, SP2

I bought the 8GB model, only had a 45 minute wait in line at ATT store. Performed activation via iTunes over 10 hours ago with porting of old T-mobile number. Still receiving message that activation is not completed. Called ATT and after 3 transfers, 35 minute hold times and then a recorded message that "due to extremely high call volumes" we will not be able to answer your call" it then proceeds to disconnect you. Finally kept trying and talked with ATT rep. in portability and they confirmed my porting has been approved but that my account still shows iPhone not registered. They then provided 877-800-3701 for problems with iPhone activation. After speaking with this representative, he would not work with me until I provided Web Order #. I told him that I purchased the phone in person at store, so he said that I would need to contact the store to obtain this number and without this number they could not verify that I had the phone and therefore it couldn't be activated. I called the store and left message. A store rep. called me back and told me that I would need to contact that same 877 number as they could not support me. ***!! To make matters worse, my old phone is now been ported and deactivated so I am phone-less and have a iPhone sitting in the dock that is completely useless. I am very disgusted at this point and don't know what to do. I was not expecting such an awful customer experience with an Apple product. Anyone have any thoughts? I drove by the AT&T store and there is a huge line of buyers, so I am not sure what to do at this point.

Could not complete the Crop command because of a program error - Win 7

So I use PS CC everyday for cropping out images from design mockups for websites.
Yesterday (1 April 2014) I got a new comp from the designer with some updated images. So I opend the comp, and began to setup the cropped area with my guides. I then grabbed the marquee tool and made my selection, clicked Image->Crop, and then I get an error message.
"Could not complete the Crop command because of a program error."
Well that is helpful.
So now its "Help me Google, you're my only hope.", after about an hour or so of searching this error I find that it mostly happens to Mac users. I am using Windows 7. I also find that people are trying to get information form a PSErrorLog.txt file that is suppsoed to be located in the "Preferences Folder"... again I am on Windows 7.
So more searching to find the Windows eqivelant of this file's location: C:\Users\{USERNAME}\AppData\Roaming\Adobe\Adobe Photoshop CC\Adobe Photoshop CC Settings
Only to find there is no PSErrorLog.txt file. I do have a sniffer-out.txt file and a bunch of .psp files, a SynchFiles folder and 2 Workspaces folders (one Modified).
So I say to myself, "Well, I have cloud and a fast connection, won't take long to reinstall." So I delete PS ( I am also runnig DW, FL, Br, and AI ), and PS only. I do not run the cleaner tool as it only wants to delete a PS driver, or EVERYTHING!, which I do not want to do, I just want to delete PS. So I delete PS and check for anything left behind (why is there always stuff left behind? Apparently DELETE really means "Only delete some parts of the app that are required to make it work, and leave the rest behind.", or something.). Anyway, I then reinstall, go to crop again, and get the same error.
So here I am, "Help me Adobe Forums, you're my only hope."

Mylenium,
You are correct. But none of that information, or those parameters, have ever had any effect on cropping anything in PS before. I crop vector smart objects brought in from AI all the time. In this case, yes the layers I am trying to crop are vector smart objects, which I rasterized and merged, then resaved the document and still get the same issue.
But, going off of your suggestion, I did flatten the image completely and I am now able to crop it without error. I suspect that there is something else in the layers that maybe causing this issue, as you have mentioned.
Thank you for your input, while you may not have known it, you gave me at least somewhere to start to try and figure out what is happening.

Could not complete the command because the extension could not be loaded

I was working in 3D with PS CS5 Extended. I went to the Window drop down menu and selected Color. I got the message "Could not complete the command because the extension could not be loaded" and the color pallet and swatches would not appear. I had to click on OK the error message three times to get rid of it as it kept reappearing. The the mini bridge and Brush pallets opened, including Brush Presets tab and Clone Source tab instead of the color pallets. How can I get my color pallets back?
I am on an iMac Intel core i3 running OS X Lion 10.7.2
Thanks for any help.
Thanks,
Don

I unstalled Photoshop. Then I installed on another drive. External. It did the same thing!!!! No mini-bridge, or any extentions loading. I don't know what is wrong.
I read something somewhere about a Panels file in photoshop. So I'm looking there.

Could not complete the camera raw command because of disk error

Hi,
First off, I am using a Mac (OS X ver. 10.9.2) and Adobe Creative Cloud Photoshop (2014). I just downloaded the preset pack off VSCO for Adobe Camera RAW and I am having trouble getting it to work.
When I try to launch the "Camera Raw Filter", I get the message 'Could not complete the Camera Raw Filter command because of a disk error.' (this also happens sometimes when i try to import the RAW files into photoshop...I don't know if it's the way i'm importing them or what...?)
I've tried uninstalling and re-installing photoshop cc several times and restarting my computer and have searched online but cannot find anything at all to help me (or i just don't understand, urgh).
Please help!

I'm getting same error and I think it's related to Adobe Camera Raw. I see several manifestations of this problem:
1) Open a RAW file (.NEF) directly using Photoshop CC 2014 - I get an error "Could not complete your request because of a disk error."
2) In Photoshop CC 2014. I go to Filter > Camera Raw Filter - I get an error "Could not complete the Camera Raw Filter command because of a disk error."
I can do the following successfully:
1) Open and edit a RAW file successfully in Lightroom 5.7
2) Open a RAW file successfully in Photoshop from Lightroom 5.7 (when I do an "Edit in Photoshop CC 2014" from Lightroom 5.7)
I was previously on LR3 and Photoshop CS5 on Mac OSX 10.6.8 (Snow Leopard) and bought an upgraded MacBook Pro last week.
My upgraded system is now:
Mac OSX 10.10.1 (Yosemite)
Photoshop CC 2014
Lightroom 5.7
I've uninstalled / reinstalled Photoshop and Lightroom numerous times and the problem still occurs.
Anyone else having the same problem?

My Ipad 3rd gen kept shutting off and we would have to restart and log back on to internet with password. So backed up to icloud and did a restore. It could not complete the restore. No luck at Genius bar. Can trade for a new one for 299. any ideas to fix

Similar Messages

Maybe you are looking for