My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight.  Do NOT use an iPod/iPhone charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know.  If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

Similar Messages

  • Some thing is wrong with my skype premium.

    I just bought skype premium and the promotion promised unlimited calls to the US and Canada, but when I try to make a call it says connecting and then disconects and tries to sell me skype credit. Other than the calls to the US there was no reason to upgrade to Premium for me. Also does skype seriously not have actual tech support. 

    temmerman7 wrote:
    I lost my skype pictogram
    On my skype premium i have about 9,5 euro.
    Please recouver the old situation.
    Hi,
    Since you managed to sign in with the right account to this forum please open Skype client on your computer and sign out. Then sign in again with the exact username you used for this forum.
    Note: Make sure you have the latest Skype from: www.skype.com/go/downloading
    If you can't for some reason sign in with the correct account then please try to provide more information, like are you getting any errors? Did you manage to sign out?
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • Hey I want to know what resolution a personas 3000x 200x is because I am trying to make one, but the middle part of the picure is movin to the left so some thing is wrong with resolution and interpolation. PS, I use Gimp.

    I use Debian and Gimp program to make my own personas but it seem like I have to know what resolution or interpolation is needed for the best result. I am trying to make one in size of 3000px wide x 200px high but don't know what resolution and interpolation is matching the requirements of Firefox or personas. For ex: in Gimp when scaling an image the interpolation possibilities are 4 like:
    None
    Linear
    Cubic
    Sync

    Try the Personas forum.
    * https://forums.mozilla.org/addons/viewforum.php?f=30

  • Discussion Board Error For Community Sorry Some thing went wrong can not complete this action

    HI All,
    we migrated the IBM community's  to SharePoint 2013 using tool,I taken the back up of that community site in SharePoint and i restored it in different SharePoint2013 Environment.
    When we trying to create any new discussion in Discussion Board List we are getting an error like.
    Sorry Some Thing Went Wrong.
    Cannot complete this action.
    Please try again.
    I checked with Correlation Id in logs but i am unable to find any issue,can you any one help on this,how to resolve this issue.
    Thanks,
    Please Help Me.

    This is the error i am seeing in my log files.Can any one help on this.I already tried to take back up and restore even thought having the same problem.
    runtime                      
    tkau
    Unexpected
    System.Runtime.InteropServices.COMException: Cannot complete this action.  Please try again.    at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String
    bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
    Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
    pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     at Microsoft.S...
    Regards,
    Phani

  • What is going on with Apple? I've just downloaded their Mavericks and my computer is performing so badly, I'm wondering if Mavericks is some sort of diabolical malware! How can I get Mavericks out of my computer?

    What is going on with Apple? I've just downloaded their Mavericks and my computer is performing so badly, I'm wondering if Mavericks is some sort of diabolical malware! How can I get Mavericks out of my computer?

    What is your year and specs of your Mac Pro?
    How much RAM installed?
    How full is your Mac's hard drive?
    Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X and have negative effects on system performance.
    Do you have apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac or anything like these apps, installed on your Mac?
    These types of apps, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
    Plus, these type of apps aren't really necessary.
    They really aren't.
    There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac.
    These apps potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
    Plus, the software company's that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
    It is best to never download and install these types of apps.
    The risk to your system and data is too great a risk!

  • I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with adminis

    I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?

    If your intention is to use the trial again it will not reset if you reinstall.  It will remain in its ran out state.

  • HT4623 My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't

    I clicked the button in my setting thatz is saying "software update iOS 6.1.2. It turned off and now My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't working. I tried to "update" twice. I am VERY ANNOYED beczuse the last time i updated it, it just turned off and i didnt have ot plug it in or anything. WHY IS IT DOING THIS.....?????? My ipad will not turn on or anything. Help me FIX THIS!!!

    hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.

  • HT4060 Is it normal for someone to have general diffuculty charging an ipad?  I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly.  It just seems to be exceedingly f

    Is it normal for someone to have general diffuculty charging an ipad?  I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly.  It is normal for me to plug it in overnight and to see no charge whatsoever the next day.  I have never had so much trouble using a friggin charger in my life.  It just seems to be exceedingly finicky.  What am I missing?

    Charging your iPad should not be problematic. It should be an easy thing to do using the charger provided with your iPad connected to a known good wall outlet.
    The charging problem you are experiencing is most like caused by:
    1. A faulty charger
    2. A faulty cable
    3. A bad wall outlet
    4. A problem in the iPad.
    The first three of these are easiest to eliminate. Try a for ends charger and cable. Make absolutely sure your outlet is good. Try other outlets.
    If the charger, cable and outlet a proven to be good then the problem lies in the iPad.
    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My phone no longer changes the view/picture/map when i go from vertical to the horizontal position is this some thing to do with the accelerometer

    my phone no longer changes the view/picture/map when i go from vertical to the horizontal position is this some thing to do with the accelerometer

    No, that would probably be the orientation lock. Check up by the battery icon and see if you have an icon with a small lock and a circular arrow. Either way, go to the Control Center, swiping up from the bottom of the screen. Look at the top row of icons and the orientation lock is the last one on the right. White is on, black is off. Just turn it off and you should be alright. Understand there are some apps that do not change into the landscape mode from portrait.

  • HT204266 I am trying to download Tap Tap Revenge on my new Ipad air..however..i searched for it in the App Store but there are none...help please..i really love this game! Is there something wrong with my App Store or my ipad??

    I am trying to download Tap Tap Revenge on my new Ipad air..however..i searched for it in the App Store but there are none...help please..i really love this game! Is there something wrong with my App Store or my ipad??

    It looks like the app is not currently in the App Store, I can't find it in the UK nor US stores.
    If you had previously downloaded it then do you have a copy on your computer's iTunes so that you can sync it to your iPad ?

  • TS2446 I forgot my security questions how do I buy some thing on iTunes with out them?

    I forgot my security questions how do I buy some thing on iTunes with out them?

    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service

  • TS1702 I cannot get Numbers to update on my iPad.  Have deleted and reinstalled it and still get old information when I drag from my Excel program.  Any ideas on what could be going wrong would be most welcome.

    I cannot get Numbers to update on my iPad.  Have deleted and reinstalled it and still get old information when I drag from my Excel program.  Any ideas on what could be going wrong would be most welcome.

    Bryce,
    Did you try disabling ActiveX Filtering?
    You have more details in the following link:
    http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9__
    Thanks,
    Sunil

  • My lock button on my 4s is stuck/ jammed and I turned on assistive touch but I was wondering how I would be able to turn on the phone if I turn it completely off?

    My lock button on my 4s is stuck/ jammed and I turned on assistive touch but I was wondering how I would be able to turn on the phone if I turn it completely off?

    To turn iPhone ON, connect it to power source, charger or USB of computer.

  • My ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it

    my ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

    I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
    The operation can’t be completed because an unexpected error occurred (error code -50)

    I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
    Unfortunately the error messages are archane and it is hard to discover their meaning.
    You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
    A5. http://pondini.org/TM/Troubleshooting.html
    Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
    If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Maybe you are looking for

  • I need to put the -Time Code- numbers running on the video... help

    OhI have FC Express.. I have Effects:Video Filters:Video: Blink, De-Interface, Flicker, Image Stabilizater, Shift Fields, Stop Motion Blur, Strobe & Viewfinder... No Timecode generator or reader here... ?

  • Reg:purchase order header deletion flag

    hi all, right now in SAP PO header deletion flag has been set to X. so what i need is the PO should be flagged only at item level . how can i proceed?where can i find the deletion flag in the transaction screen?

  • Bridge not Remembering Last Position for Side Panels?

    The side panels in Bridge CS6 will not stay to the last set position when I close? I have thought that this was a case of bridge not closing properly on Windows (7) shutdown. I then tried setting the side panels to where I would like them and went Fi

  • New problem conflicting item

    Dear nokia ye kya majak bna rakha hai. I update my nokia browser on c2-03.and it shows conflicting item.nokia express.what is this have u provide nokia for free.then why create such problem.

  • Change of  Base value percentage

    Hi , I want to change the base value percentage with t-code :S_ALR_87009145 now, there are many assets have to update. Is there any way to change the percentage for many assets?(Ex.batch input, bapi....) Regards,