My ipad 4 wont restore

how do i restore it i have tried it with itunes and with my device. when i do it with my device it takes forever but it doesnt work. when i did it on itunes it showed up as an error.

Hi fay12,
If you are having issues restoring your iPad, you may find the troubleshooting steps in the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Cheers,
- Brenden

Similar Messages

  • Help needed - ipad wont restore

    Hi all,
    Just tried to upgrade my old ipad with the new software and now it wont restore at all.. i keep getting a unknown error 2006.
    Any ideas how i can get around this plss.
    Jim

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    Look at this discussion that I found in the More Like This box on the right. You can try the recommendation in it as well.
    DFU Mode
    https://discussions.apple.com/message/11393568#11393568

  • HT201210 my ipad wont restore it shows error code 1611 then returns to the symble connect to itunes

    having trouble restoring my ipad error code 1611 pops up then ipad returns the a screen showing connect to itunes please help ?

    Take a look at this link, http://support.apple.com/kb/ts3694

  • New Ipad wont restore to ios 6

    rather comes up with error 6 and error 3194. now ipad is not restoring and and comes up with the image of 'plug into itunes'. I plug it into itunes, and it says to to restore to latest firmware, but when i restore it comes up with more errors

    This won't solve you immediate problem, but in the future you can enroll your iPads in Meraki's free MDM, which allows remote removal of lock codes to registered devices. Note that it will NOT re-enable the device if the wrong password has been entered too many times, although it will be gone once the timer expires. If the limit has been reached and the device is perminantly disabled, as far as I can tell (including a support call to Apple), there is no way to retrieve the user information - the iPad can only be wiped and reloaded from scratch.

  • My Ipad Wont Restore!!?!?

    it says that the Ipad "Ipad" could not be restored. An unknown error occured (9). What does this mean? HELP ME PLEASE!

    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Copied from here.
    http://support.apple.com/kb/TS3694#error9

  • Ipad wont restore

    hey, while updating my ipad to the latest ios 7 the ipad screen went blank and then the "connect to itunes" screen came up. when i connected the ipad to itunes and tried to restore it, it keeps stopping halfway through giving an 'unknown error 14" message. ive tried holding down the home button and then plugging in the ipad and letting itunes restore etc but to no avail...any ideas please??????

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • Ipad wont restore keep getting error code 1

    i have tried to update my software o my iPad and my screen says to connect to iTunes, in iTunes it will not restore. i keep getting could not restore unknown error occurred(1)
    the software is up to date on my mac

    Error 1 sometimes indicates a hardware problem. See link below.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
    iOS: Apple logo with progress bar after updating or restoring from backup
    http://support.apple.com/kb/TS3681
     Cheers, Tom

  • HT4623 my ipad wont restore after trying to upgrade software, now says Unexpected error (3) ....?

    After trying to update software on my ipad it now will attempt to restore but gets to the end and says unexpected error (3)?? any ideas how i can solve this?

    the 3 is in brackets (3)? Before that it says unexpected error has occured...
    I cant remember what version we were on before updating.
    I have just purshased a new computer and down loaded the latest version of itunes and still have the same problem...
    My iphone updated fine...

  • Ipad wont restore itself.

    I forgot my passcode to my iPad (sadly). So I have to restore it however I have been stuck in the restore mode for about 2 days now. I took down my firewall and norton security. I just tried to "restore" again the SAME EXACT ERROR came up again. So now im frustrated and tired. What do I do next. I am currently downloading King Peungin solution to see if it works.
    King_Penguin West Sussex, UK
    This helped meRe: Failed update from ios 3.2.2 to 5.1 for iPad 1, what can I do?
    Nov 12, 2011 3:02 AM (in response to sophiefm)
    Try temporarily turning off your firewall and antivirus software until the download has completed.
    If that doesn't work then you could try downloading the update via a browser and then in iTunes pressing and holding the shift key on Windows (command key on Mac) when clicking the Check For Updates button which should let you navigate to the downloaded file :
    ipad1
    iPad 2 wifi-only
    iPad 2 GSM/sim
    iPad 2 CDMA
    I am tired and I would really appreciate if someone could help me out. Thank You.
    I have already tried the hold home button and start button crap. everytime it begins to restore it goes so far then gets stuck and pops up on the computer saying it has resotred leave ipad in computer for a few seconds. but all the ipad does is pop up connect to itunes.

    Read his post again. He said that he used a USB port directly on the computer, do not use a hub to connect the iPad to iTunes.
    " but i read on another post to not use a usb hub but plug directly into back of computer. did this and it is now working"

  • IPad wont restore, stuck in recovery mode!!

    My iPad wouldnt turn on, it would show the apple logo for like 10 seconds then the screen would flash black and then the apple logo would show again, this happened over and over again and would never turn on. I tried everything, then finally I gave up and decided to just restore it. So I put my ipad in recovery mode and plugged it in. It would get to the point where the bar on the ipad started filling up then it would stop and give me an error. At first it gave me error 14, so I did everything this website told me to do: http://support.apple.com/kb/ts3694. Then it gave me error 9 but I dont even have any security on this computer. So I tried different things and it kept giving me different errors. I even tried restoring on different computers. I gave up and now my ipad is stuck in recovery mode. Ive tried putting it in dfu mode, tried turing it off and back on, nothing, still recovery mode. I have an iPad 4. I dont have any other options. What do I do?

    If you tried this, and still nothing, then a trip to the Genius Bar is in order.
    Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.

  • HT1414 my ipad wont restore?

    It's in recovery mode and I have tried to restore from Itunes but no luck

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipad wont restore to earlier back up copy

    I backuped my 32 gb wifi - 3g and recently bought a used 64 wifi - 3g.  I want to move everything from the 32 to my 64 before giving the 32 to my wife.  I backed up the 32 and then plugged in the 64.  Everytime it stats to restore it the estimated time goes throught the cieling.  Typically it goes from 3 minutes estimated time to 2+ hours estimated time within 2 minutes or less.
    I have restored the 64g to original a half dozen times but that is where the cooperation ends.
    Do you have any ideas?

    You can only choose to restore from backups that you can find under "Settings > iCloud > Storage & Backup > Manage Storage" (check the time and date). If you want to restore your device from this backup then you would have to reset your device (Settings > General > Reset) so that you can choose the backup during the initial set up process.

  • My iPad wont restore saying iTunes could not connect to iPad because it is locked with a passcode you must enter your passcode on iPad before it can be used but I CARNT enter a passcode

    PPlease pleas help me

    Hi ..
    Follow the instructions here >  iOS: Forgotten passcode or device disabled after entering wrong passcode

  • MY IPAD SWITCHED OFF RANDOMLY AND NOW WONT RESTORE! HELLLLLLLP

    MY IPAD WONT RESTORE AND I HAVE TRIED EVERYHING POSSIBLE AND I CANT EVEN CONTACT APPLE ABOUT IT OR GO TO AN APPLE STORE! HELPPPPPP PLEASE

    What things have you actually tried? Saying Everything Possible doesn't help us at all. is the battery charged? What happens when you tried to restore the iPad? Did you get any error messages? If so what were they? Did you try a reset?
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.

  • I tried to restore my ipad but all i have got is the itunes logo and cable and it wont restore with an error saying 1604

    Major help please.
    Bought my ipad yesterday and the sync all worked fine. I needed to wipe it which worked but now it wont restore and the ipad wont go past the itunes logo with the connecting wire on the front screen and when it sometimes does, after the restore there is an error (1604)
    stressing.
    help would be much appreciated.

    CT782-
    How long did you wait?  It might just take a while.
    Could the computer's USB port have gone to sleep?  I would try disconnecting the iPad and reconnecting it, to see if that is what iTunes is waiting for.
    If there is another USB port, try that one too.
    Fred
    Message was edited by: Fred*M.

  • I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. What should I do?

    I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. How can I fix it because nothing works?!

    http://support.apple.com/kb/ht1212

Maybe you are looking for

  • MBP Retina not recognizing external drive

    I have a strange problem with an external SSD.  When I put the drive into an external USB3 case, the computer will not see it.  If I plug it into a GoFlex expansion, it sees it fine.  If I take this drive and plug it into another MBP (Via USB3) it fi

  • TV@nywhere A/D Vista 64Bit

    I can not get it working. The vista driver seem ok that I downloaded from MSI, but the driver is usless without software to work it. I tried compatability mode, but still no work. vista say no compatable DVB software. Any help would be much appreciat

  • Production transports  referring to Dev Source system

    Hi All, We have Dev -> QA -> Prod setup for both BW and R/3. In BW corresponding source systems are created in each server. Transport Connection Source sytem mapping : In BW QA , I have mapped the source systems R3DEV to REQA. In BW PRD ,I have mappe

  • Oracle RAC binaries on vxfs shared file system

    Hi, Is it possible to install oracle binaries on vxfs cluster file system for oracle RAC under sun cluster? Because as I know we can not use vxfs cluster file system for our oracle datafiles. TIA

  • DNS server process, high CPU usage

    Hello, I am having a problem with high CPU usage on DNS process. We have 1921 setup in network of about 100 workstations that use it as DNS server. It also performs split view functionality for couple of domains in order to avoid hairpin NAT. I know