My ipad(5.1) cant detected on my iTune(10.5). Help pliz
The problem I get here is that, first time I tried to connect my IPAD to my PC bt the msg say "Your USB Device is not recognized by Windows" the I installed theiTune 10.5. Now this time no error msg bt still I dont see my device on my iTune....any assistance pliiiz....
Hi yt chris,
If your iPad isn't being recognized by iTunes (and possibly by your Windows computer), you may find the troubleshooting steps in the following articles helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Apple Support: iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden
Similar Messages
-
hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit
This is a problem with the Mac OS X implementation of exFAT. I've had the same problem.
Best is to use a Windows box to format the drive exFAT. Then it can be read by both Windows and Mac OS.
But aren't Macs supposed to "Just Work"? Not in this case. -
i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can any1 help me?
If you have a backup of your information on your computer, I would suggest putting your phone into recovery mode, by holding down the home key and keeping it held down while you connect it by usb into your computer with itunes running. Keep the home button held down until it indicates recovery mode, and proceed with the restore.
-
HT201412 I have tried to restore my ipad and it cant be found in itunes
I have tried to restore my ipad and it cant be found in itunes
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
ipad is disabled because putting wrong password too mant times and it wont connect to itune. error comes when connected saying put your passcode to your ipad but ipad is disabled. tried restoring and same problem. msg on the ipad says disabled connect to itune. i havent connect this ipad to any computer before. please help?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi everyone,
This is my first post so if I've made any mistakes please forgive me. I have recently upgraded from Windows 7 Ultimate to Windows 8.1 Professional however, now my iPad and iPhone are not recognised in iTunes. I have checked Device Manager and the iPad is listed, I also asked it to update the driver but it informed me that I have the most up to date version. Can anyone help please?Hi Skydiver119,
Many thanks for your prompt reply however, I found this post and it worked perfectly. I hope it helps other users.
Plug your Ipad USB cable into USB port.
Go to your Control Panel, click Hardware and Sound, then click Device Manager.
Click on Portable Devices, and you should see Apple Ipad shown (or whatever apple device your using).
Right-click the Apple Device your using, and choose Update Driver Software..
Click "Browse my computer for driver software."
Click "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. (If the Have Disk option is not present, choose a device category such as Mobile Phone or Storage Device if listed, and click next. The Have Disk button should then appear.)
In the "Install from Disk" dialog, click the Browse button.
Use this window to navigate to the following folder:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
Click OK in the "Install from Disk" dialog.
Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly. -
When I try to access iTunes store through my iPad 2 it says "Cannot Connect to iTunes Store". App store is working fine.
Welcome to the Apple Community.
Advanced iTunes Store troubleshooting
Can't connect to the iTunes Store
iTunes Store connections problems -
I have disabled my ipad and i cant connect it to itunes what do i do?
i have dissabled my ipad and i dont know how to connect to itunes to restore it!!:(((
If you forgot the passcode and that is why it is disabled ....
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Instructions can be found here.
http://support.apple.com/kb/ht1212
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
Devise detection issues with itunes...help!
itunes (for windows) no longer detects either my ipad or iphone to sync. I have restarted compute and other devises with no luck. Any throughts or ideas?
Vaio users worldwide have been seeing this problem. Some Sony software causes a conflict with iTunes. You need to set the Sony Content Folder Watcher to leave the iTunes folder alone.
I don't have a Vaio, but this older topic has directions
http://discussions.apple.com/message.jspa?messageID=8537277 -
Can anyone give me a list of reasons why my ipod touch and my new ipad are recognised as cameras in itunes on my xp computer? It always used to work so do not know what has changed. Things are okay on my laptop.
"Can anyone give me a list of reasons why my ipod touch and my new ipad are recognised as cameras in itunes on my xp computer? "
Because your ipod touch and your ipad are cameras. -
New Ipad wont turn on or register in itunes...help!:(
My dad gave me a new ipad from a guy at work, its new but its not from the box, i charged it and turned it on, and it says to plug into itunes via usb cord. When I plug it into my laptop, my itunes doesnt pick up the device at all, How can I get it to show up in the device section so i can register it and turn it on actually? Im lost. Anything would help thanks.
First make sure you meet the requirements
PC with USB 2.0 port
Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access -
HT201412 i cant connect with my itunes to unlock ipad
My son was attempting to guess password locked Ipad unable to get to screen on Itunes to unlock Ipad. on screen states to connect to itunes to unlock help no house computer
With no computer, you won't be able to unlock. Use a friend's computer or take it to an Apple store.
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Ipad mini wont charge or connect with itunes
Ipad mini wont charge or connect with itunes? Pls help?
Device not recognized
http://support.apple.com/kb/ts1538 -
My ipad crashed and wont wake up, it itunes cant detect it
yesterday my iPad randomly crashed, it was at full charge and iTunes does not even know its connected, it will not charge and cant wake up, do i need to get a new iPad?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Maybe you are looking for
-
How to remove the button "play" and "stop" in that flash animation?
The animation is this one ... http://adf.ly/OTGyh Hello, I made a simple flash animation of a character talking ... The only problem is that this animation has the button "play" and "stop" and I do not want it ... I want so carry out the main charact
-
Using illustrator How do I import a PDF Business Card and Edit
Hi I have a sheet of business card that was saved as a PDF file. I need to be updated with info extract the logo and keep it separate. I want to how to import the PDF file then edit all the images text. Can this be done. Thanks
-
I have a canon 3Ti and I want to do pet photography. What kind of lens should I get?
I want to do pets mostly outdoors and some inside. I use phot shop but still like to do less editing. I like to find a good lens for pets. I have one regular lens and a 80-200 lens.
-
Service-Based Invoice Verification indicator setup automatically
Hi, How to get the Service-Based Invoice Verification indicator setup automatically when a user tries to create a PO. There is no service master being setup for the sevices carried out. Bascially the requisiitons are created through Projects based on
-
Drag-n-drop broken in itunes 7 ???
I can't seem to drag and drop directly from explorer to my ipod with itunes 7 [manual music management]. I have to drag it to the 'library' first, and then drag it from the library to my ipod. That sure seems a step backward.