My ipad 5 does not start without i reboot

Mon ipad ne démarre pas lorsque j'appuie sur le bouton principal.
Je dois le redémarrer en appuyant sur le bouton marche/arrêt et le bouton principal.
Avez-vous une solution ?
Have you a solution ?

Try something easy first. Quit iTunes, reboot your PC and restart the iPad, then see if iTunes will recognize the device.
If that fails, go through the steps in this article .... IOS: Device not recognized in iTunes for Windows.
http://support.apple.com/kb/TS1538

Similar Messages

My iPad does not start. What can be the problem

My iPad does not start. What can be the problem

Does anything happens when you try to switch it on ? If not, then assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT201210 While restoring it shows unknown error and exits. Now the ipad does not starts

I tried updating OS from 4.3.1 to 6.1
After downloading it shows preapering for restore
then it quits saying Unknown error
Now the ipad does not starts.
It show only an Apple sign and a status bar.
Noting happens when i press power button
What to do??

Sounds like you need t orestore the iPad with iTunes: http://support.apple.com/kb/ht1414

TS3274 my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml

Ipad does not start

Dear Sir
I updated my itunes while my ipad was connected to the desktop. Now my Ipad does not start. I get a screen with the icons for CD under it written iTunes and arrow; and connection cable?
Please help me on the same.
Thanks

Restore help here. iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

TS3274 iPad does not start after the latest software update

After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.

If the reset doesn't work, force iPad into recovery mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Photoshop does not start unless I reboot

I have been having this problem since yesterday. Photoshop does not start after I use the computer for a while. I opened Windows Task manager to see if any processes start at all, even though the application does not start. Two processes (1) AdobeIPCBroker and (2) Photoshop.exe process start, but photoshop application does not open , not does it show up in the applications. What may be going wrong?
Arun

domike wrote:useradd someuser ; mkdir -p /home/someuser ; chown someuser:someuser /home/someuser
Where did you get this idea? This is the problem.
Follow the wiki
Also, you realize everything you are installing and doing only remains in memory. Why are you installing all these packages? Are you going to repeat this installation and user creation at every reboot?
EDIT: something else is wrong too - but until you fix the above, it will be hard to know if it is a separate cause, or an indirect effect. /run/user/0 should not be relevant, but /run/user/1000 should be used. I suspect your method of starting X is logging out of the 'su'ed user and is dropping back to the root login that it is under. You'll likely need to change tty's to log in as your user - on a normal system you could log out of the root session and back in as your user - but on the iso I think autologin for root is set on tty1. Of course you could disable this too.
Last edited by Trilby (2014-05-28 11:44:42)

Recon task does not start after database reboot during recon in OIM

If during a trusted recon, the database reboot then we are unable to start any recon task after the database come up. The logs does not get update. We are using OIM 9.1 on oc4j 10.1.3.3.
Thanks.
Vinay
Edited by: user504421 on Jan 23, 2009 2:49 PM

Make sure the scheduler is running. Go to http://oimurl/xlScheduler to view the status and http://oimurl/xlScheduler/admin to stop and start the scheduler if needed.
-Kevin

Ipad does not start. logo appears but goes off after some time.

I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.

I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.

Mail Mavericks still does not start without crashing

I've updated Mavericks and also installed the Mail update but my mail app is still crashing, can't start it without crashing.
I have 3 gmail accounts that use the mail app...everything was functioning fine before Macericks...Also if I try to go to Online accounts in system preferences, system preferences crashes.
Anny suggestions?
Best regards,

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Oracle does not start automaticly after reboot

I've installed O 9i on win2ksrv after installing DB2.
Then I create a database and this db starts successfully.
After reboot the database is shutdown and can only starts manually by sysdba.

Hi,
Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full". If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
Regards
Bhavik G. Shroff

My ipad does not sound without headphones

my ipad stopped ringing for no reason , only works if I hold headphones

If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7 or iOS 8. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the iPad Air 2 - you can only control system sounds from the control center since there is no side switch.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Ssh does not start at boot

Hi All
As my title explains, ssh does not start when I reboot.
I can start it like: ./usr/lib/ssh/sshd
So my question is: how can I change this behaviour and let ssh start at boot ?
Thanks a lot in advance
Luca

thnx a lot!!!!
Luca

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

My ipad 5 does not start without i reboot

Similar Messages

Maybe you are looking for