My Ipad Air reboot all time. How can i fix this?

All time that I am using my Ipad Air, than he reboot unexpected.
Just using any app, as safari, pages, keynote, numbers and any other apps.
I do not know how can I fix this.
Thank you all.

Hi André_RJ,
It sounds like no matter what app you are using, your iPad Air restarts on its own. I would start by resetting the phone, with these steps:
Restart or reset your iPhone, iPad, or iPod touch
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists I would use the following article to backup your device to iTunes and restore it from your backup. If the issue persists, then restore it one more time as new using the same article to isolate to the backup file itself.
How to erase your iOS device and then set it up as a new device or restore it from backups
Thank you for using Apple Support Communities.
All the best,
Sterling

Similar Messages

My mac is freezing all the time, how can I fix this?

My mac is freezing all the time, how can I fix this?

Run Disk Utility to verify/repair your drive(s). Boot from your installer dvd to repair the boot drive. If the repair reports that it fixed anything then see if your problem is fixed.

HT1535 songs in my ipad air, are listed twice, how can i sort this

songs in my ipad air are listed twice, how can i fix this

problem solved thanks to Turing2 select the dup song swipe right to left and it will show a delete button. brill thanks

The conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?

the conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?

try to exit out of the youtube app with the multitasking feature. if this doesnt work then try to do a manual restart by holding down the home and power/sleep button all the way past the "slide to unlock" screen until the ipod will power off and the apple symbol will appear when the ipod tuens back on

Recently I can not open any app. in my Ipad except original ones. How can I fix this problem?

Recently I can not open any app. in my Ipad except original ones. How can I fix this problem?

You do NOT need to restore your iPad.
I believe that the problem is that there is a disconnect with your iTunes account and your iPad. What you are experiencing is a somewhat common issue after you sync your iPad, update your device - it could be a number of reasons that are causing it. the recommended fix is to download another app in order to "reconnect" your ID and iTunes account to the iPad.
You can read more about it here. You will need a WiFi internet connection in order to fix it - or you have to be able to sync with your own iTunes library.
iOS: Troubleshooting applications purchased from the App Store
But this is what it says in the article.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install a free (or paid) app that isn't already installed on your device to reset this information. You could also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.

HT204291 the airplay icon doesnt appear on my new iphone 4S nor does it on my ipad 2 or in itunes, how can i fix this?

the airplay icon doesnt appear on my new iphone 4S nor does it on my ipad 2 or in itunes, how can i fix this?
cause i got an apple tv pretty much to mirror my phone and ipad to my tv so i really need this to work

it only appear when the appletv is not suspented

My 2009 iMac freezes and won't run more than one application at a time - how can I fix this?

Help! My iMac has been getting worse regarding freezing, especially when trying to open iPhoto. It will load slowly, and then I get the pinwheel of death for ever, until I shutdown and try over again. It usually takes several tries, and usually overnight. How can I resolve this issue?

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

IPad shows error 0xE8000024 when trying to connect to I tunes. Not sure how to fix, also all I get on my ipad is the apple symbol. how can I fix this?

My ipad will not power on all I get is the apple for awhile then it dissapears. I conncected to my laptop to reconfigure with i Tunes, even uninstalled i tunes and reinstalled it on lap top and I keep getting an error ( 0xE8000024), does anyone know how to fix this?

Have you tried any of the other suggestions in this kb article.
http://support.apple.com/kb/TS3221

Magic mouse cursor lags all the time, how can I fix this?

I've updated to 10.10.3 and this is still happening, please fix this bug.
Thanks

UPDATE and additional info: This problem is still occurring.
Apply have been completely unhelpful so far, after a second phone call, I was just told (again) to restart my MBP, unpair and repair my mouse, and insert fresh batteries. I've also done the SMC and PRAM resets several times.
I'm using my MBP in clamshell mode connected to a BenQ GL2460 monitor. Running my MBP slightly ajar seems to temporarily help with he mouse lagginess but the problem soon reoccurs.
I've tested my mouse on a friends earlier model non updated MBP and the mouse works fine.
I went out a bought a Microsoft USB mouse and the same lagginess happens with it, albeit a lot worse.
I'm currently running both mice connected via bluetooth, which actually seems to be minimising the magic mouse lagginess, but the Microsoft mouse is still very laggy. So I wonder what having two mice connected simultaneously is doing?

TS3694 ipad says its disabled. How can i fix this

My ipad says its disabled , how do i fix it.

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Apple Application Support not found and i have re downloaded itunes 4 times how can i fix this issue error code 2

Please i need some help here with this issue i am using a windows 7 acer and i would like to be able to listen to music while im gaming is there anyway i can fix this issue i am having i keep getting Error code 2 (windows error 2)

You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunes installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
See also Troubleshooting issues with iTunes for Windows updates.
tt2

The back and forward arrows are greyed out all the time - How can I fix this?

I am currently using firefox ver 21. However the forward and back buttons are greyed out and will not work. I would be happy to re-install the program but how do I re-install without losing all my bookmarks and settings.
Please advise.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

Every time I turn on my computer and open Firefox all my add ons are open in tabs and I have to enable all of them all the time, how can I fix this?

I'm using Firefox v. 20.0.1 and Windows 7 Home premium 64 bit.

Which security software (firewall, anti-virus) do you have?
It should be necessary to confirm that you want to install third-party extensions.<br />
This usually indicates that other software is messing with files in the profile folder and is corrupting them.<br />
This can either be the extensions.sqlite database file or the prefs.js that stores first run prefs (the first is the most likely cause).
Do you have any cleanup software running on a schedule that may be causing this?
Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar ("Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
If this hasn't helped then also try to delete the addons.sqlite file.

HT4623 I have the updated ios6 but my I tunes will not open at all. How can I fix this?

I don't know how to fix my I tunes I can log onto it on throw the Internet so I know it's the right password. I have the updated ios6 software and have tried everything I can think of. Logging out and turning off the IPad and starting it back up trying to login under the settings/iTunes/login. Still nothing. It states it can't connect when I'm connected to wifi. Please help me resolve this dilemma. Thank you.

Do you have a mouse you can use to go to System Preferences and check the TrackPad and see that it is pairing and that the replacement batteries are good? There have been a few users who have had problems with suppossedly new batteries, turned out they actually were not strong enough to pair. If you cannot use a mouse, try a different set of batteries and see if that resolves the issue.
If that does not resolve it, take the TrackPad to an Apple store genius bar and have the techs test it to see that it is not defective.

When I right click "save image as" on a JPG file, I get no response at all. How can I fix this?

I am running Firefox 34.0 on Linux (Fedora 20, KDE desktop). I checked the Mozilla download site and it says I have the latest version. When I right click on a JPEG file to save it, I get the "save image as" option, but when I select it, nothing happens. The file is not downloading. I google searched for fixes and tried all of the following, per the Mozilla support documents, all with no change in response:
- Changing the download folder
- Reseting the relevant preferences in the about.config folder
- clearing the download history
- Running Firefox in Safe Mode
Additionally, I verified under preferences that jpeg image is set to "always ask".
All other references to this problem seem to refer to problematic plugins, but the safe mode check shows that is not my issue. Any idea what the issue could be and how I can fix it?

As previously stated, when I run with all of the addons disabled, the problem still exists. I just tried this again and verified it again. Per your suggestion, I created a new profile and found that the save image as command worked. Do you have any idea what part of the profile is corrupted and causing the problem? I'd like to localize the problem so I can save as much of my old profile as possible, and not have to start over rebuilding all of my settings.

My Ipad Air reboot all time. How can i fix this?

Similar Messages

Maybe you are looking for